Merge branch 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS

 - quite some driver updates

 - cleanups for the i2c-mux subsystem

 - some subsystem-wide constification

 - further cleanup of include/linux/i2c

* 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
  i2c: sprd: Fix undefined reference errors
  i2c: nomadik: constify amba_id
  i2c: versatile: Make i2c_algo_bit_data const
  i2c: busses: make i2c_adapter_quirks const
  i2c: busses: make i2c_adapter const
  i2c: busses: make i2c_algorithm const
  i2c: Add Spreadtrum I2C controller driver
  dt-bindings: i2c: Add Spreadtrum I2C controller documentation
  i2c-cht-wc: make cht_wc_i2c_adap_driver static
  MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c
  i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones
  i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  MAINTAINERS: drop entry for Blackfin I2C and Sonic's email
  blackfin: merge the two TWI header files
  i2c: davinci: Preserve return value of devm_clk_get
  i2c: mediatek: Add i2c compatible for MediaTek MT7622
  dt-bindings: i2c: Add MediaTek MT7622 i2c binding
  dt-bindings: i2c: modify information formats
  i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support
  ...

Documentation/devicetree/bindings/i2c/i2c-mtk.txt

@@ -1,14 +1,15 @@
-* Mediatek's I2C controller
+* MediaTek's I2C controller
 
-The Mediatek's I2C controller is used to interface with I2C devices.
+The MediaTek's I2C controller is used to interface with I2C devices.
 
 Required properties:
   - compatible: value should be either of the following.
-      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek mt2701
-      "mediatek,mt6577-i2c": for i2c compatible with mt6577.
-      "mediatek,mt6589-i2c": for i2c compatible with mt6589.
-      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for i2c compatible with mt7623.
-      "mediatek,mt8173-i2c": for i2c compatible with mt8173.
+      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
+      "mediatek,mt6577-i2c": for MediaTek MT6577
+      "mediatek,mt6589-i2c": for MediaTek MT6589
+      "mediatek,mt7622-i2c": for MediaTek MT7622
+      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
+      "mediatek,mt8173-i2c": for MediaTek MT8173
   - reg: physical base address of the controller and dma base, length of memory
     mapped region.
   - interrupts: interrupt number to the cpu.

Documentation/devicetree/bindings/i2c/i2c-rcar.txt

@@ -2,6 +2,8 @@ I2C for R-Car platforms
 
 Required properties:
 - compatible:
+	"renesas,i2c-r8a7743" if the device is a part of a R8A7743 SoC.
+	"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
 	"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
 	"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
 	"renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
@@ -12,7 +14,8 @@ Required properties:
 	"renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
 	"renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
 	"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
-	"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 compatible device.
+	"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
+				device.
 	"renesas,rcar-gen3-i2c" for a generic R-Car Gen3 compatible device.
 	"renesas,i2c-rcar" (deprecated)
 

Documentation/devicetree/bindings/i2c/i2c-rk3x.txt

@@ -7,6 +7,7 @@ Required properties :
 
  - reg : Offset and length of the register set for the device
  - compatible: should be one of the following:
+   - "rockchip,rv1108-i2c": for rv1108
    - "rockchip,rk3066-i2c": for rk3066
    - "rockchip,rk3188-i2c": for rk3188
    - "rockchip,rk3228-i2c": for rk3228

Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt

@@ -4,6 +4,8 @@ Required properties:
 - compatible      :
 			- "renesas,iic-r8a73a4" (R-Mobile APE6)
 			- "renesas,iic-r8a7740" (R-Mobile A1)
+			- "renesas,iic-r8a7743" (RZ/G1M)
+			- "renesas,iic-r8a7745" (RZ/G1E)
 			- "renesas,iic-r8a7790" (R-Car H2)
 			- "renesas,iic-r8a7791" (R-Car M2-W)
 			- "renesas,iic-r8a7792" (R-Car V2H)
@@ -12,7 +14,8 @@ Required properties:
 			- "renesas,iic-r8a7795" (R-Car H3)
 			- "renesas,iic-r8a7796" (R-Car M3-W)
 			- "renesas,iic-sh73a0" (SH-Mobile AG5)
-			- "renesas,rcar-gen2-iic" (generic R-Car Gen2 compatible device)
+			- "renesas,rcar-gen2-iic" (generic R-Car Gen2 or RZ/G1
+							compatible device)
 			- "renesas,rcar-gen3-iic" (generic R-Car Gen3 compatible device)
 			- "renesas,rmobile-iic" (generic device)
 

Documentation/devicetree/bindings/i2c/i2c-sprd.txt

@@ -0,0 +1,31 @@
+I2C for Spreadtrum platforms
+
+Required properties:
+- compatible: Should be "sprd,sc9860-i2c".
+- reg: Specify the physical base address of the controller and length
+  of memory mapped region.
+- interrupts: Should contain I2C interrupt.
+- clock-names: Should contain following entries:
+  "i2c" for I2C clock,
+  "source" for I2C source (parent) clock,
+  "enable" for I2C module enable clock.
+- clocks: Should contain a clock specifier for each entry in clock-names.
+- clock-frequency: Constains desired I2C bus clock frequency in Hz.
+- #address-cells: Should be 1 to describe address cells for I2C device address.
+- #size-cells: Should be 0 means no size cell for I2C device address.
+
+Optional properties:
+- Child nodes conforming to I2C bus binding
+
+Examples:
+i2c0: i2c@70500000 {
+	compatible = "sprd,sc9860-i2c";
+	reg = <0 0x70500000 0 0x1000>;
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "i2c", "source", "enable";
+	clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+