Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu', 'clk-imx-init-array-cleanup' and 'clk-rockchip' into clk-next

* clk-mvebu-spdx:
  clk: mvebu: armada-37xx-periph: switch to SPDX license identifier

* clk-meson:
  clk: meson: add gen_clk
  clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition
  clk: meson-axg: add clocks required by pcie driver
  clk: meson: remove unused clk-audio-divider driver
  clk: meson: stop rate propagation for audio clocks
  clk: meson: axg: add the audio clock controller driver
  clk: meson: add axg audio sclk divider driver
  clk: meson: add triple phase clock driver
  clk: meson: add clk-phase clock driver
  clk: meson: clean-up meson clock configuration
  clk: meson: remove obsolete register access
  clk: meson: expose GEN_CLK clkid
  clk: meson-axg: add pcie and mipi clock bindings
  dt-bindings: clock: add meson axg audio clock controller bindings
  clk: meson: audio-divider is one based
  clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL

* clk-imx7d-mu:
  :  - i.MX7D mailbox clk support
  clk: imx7d: add IMX7D_MU_ROOT_CLK

* clk-imx-init-array-cleanup:
  :  - i.MX clk init arrays removed in place of CLK_IS_CRITICAL
  clk: imx6sx: remove clks_init_on array
  clk: imx6sl: remove clks_init_on array
  clk: imx6q: remove clks_init_on array

* clk-rockchip:
  clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
  clk: rockchip: fix clk_i2sout parent selection bits on rk3399
  clk: rockchip: add clock controller for px30
  clk: rockchip: add support for half divider
  dt-bindings: add bindings for px30 clock controller
  clk: rockchip: add dt-binding header for px30

Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt

@@ -0,0 +1,56 @@
+* Amlogic AXG Audio Clock Controllers
+
+The Amlogic AXG audio clock controller generates and supplies clock to the
+other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
+devices.
+
+Required Properties:
+
+- compatible	: should be "amlogic,axg-audio-clkc" for the A113X and A113D
+- reg		: physical base address of the clock controller and length of
+		  memory mapped region.
+- clocks	: a list of phandle + clock-specifier pairs for the clocks listed
+		  in clock-names.
+- clock-names	: must contain the following:
+		  * "pclk" - Main peripheral bus clock
+		  may contain the following:
+		  * "mst_in[0-7]" - 8 input plls to generate clock signals
+		  * "slv_sclk[0-9]" - 10 slave bit clocks provided by external
+				      components.
+		  * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external
+				       components.
+- resets	: phandle of the internal reset line
+- #clock-cells	: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be
+used in device tree sources.
+
+Example:
+
+clkc_audio: clock-controller@0 {
+	compatible = "amlogic,axg-audio-clkc";
+	reg = <0x0 0x0 0x0 0xb4>;
+	#clock-cells = <1>;
+
+	clocks = <&clkc CLKID_AUDIO>,
+		 <&clkc CLKID_MPLL0>,
+		 <&clkc CLKID_MPLL1>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL3>,
+		 <&clkc CLKID_HIFI_PLL>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_GP0_PLL>;
+	clock-names = "pclk",
+		      "mst_in0",
+		      "mst_in1",
+		      "mst_in2",
+		      "mst_in3",
+		      "mst_in4",
+		      "mst_in5",
+		      "mst_in6",
+		      "mst_in7";
+	resets = <&reset RESET_AUDIO>;
+};

Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt

@@ -0,0 +1,65 @@
+* Rockchip PX30 Clock and Reset Unit
+
+The PX30 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
+- compatible: CRU should be "rockchip,px30-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "i2sx_clkin" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+
+Example: Clock controller node:
+
+	pmucru: clock-controller@ff2bc000 {
+		compatible = "rockchip,px30-pmucru";
+		reg = <0x0 0xff2bc000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	cru: clock-controller@ff2b0000 {
+		compatible = "rockchip,px30-cru";
+		reg = <0x0 0xff2b0000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@ff030000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff030000 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};