Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "We've got a fairly large cleanup branch this time.  The bulk of this
  is removal of non-DT platforms of several flavors:

   - Atmel at91 platforms go full-DT, with removal of remaining
     board-file based support

   - OMAP removes legacy board files for three more platforms

   - removal of non-DT mach-msm, newer Qualcomm platforms now live in
     mach-qcom

   - Freescale i.MX25 also removes non-DT platform support"

Most of the rest of the changes here are fallout from the above, i.e. for
example removal of drivers that now lack platforms, etc.

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
  mmc: Remove msm_sdcc driver
  gpio: Remove gpio-msm-v1 driver
  ARM: Remove mach-msm and associated ARM architecture code
  ARM: shmobile: cpuidle: Remove the pointless default driver
  ARM: davinci: dm646x: Add interrupt resource for McASPs
  ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
  ARM: davinci: dm646x: Clean up the McASP DMA resources
  ARM: davinci: devices-da8xx: Add support for McASP2 on da830
  ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation
  ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs
  ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request
  ARM: OMAP2+: Remove legacy support for omap3 TouchBook
  ARM: OMAP3: Remove legacy support for devkit8000
  ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
  ARM: shmobile: Consolidate the pm code for R-Car Gen2
  ARM: shmobile: r8a7791: Correct SYSCIER value
  ARM: shmobile: r8a7790: Correct SYSCIER value
  ARM: at91: remove old setup
  ARM: at91: sama5d4: remove useless map_io
  ARM: at91: sama5 use SoC detection infrastructure
  ...

arch/arm/mach-imx/Kconfig

@@ -77,13 +77,6 @@ config SOC_IMX21
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
-config SOC_IMX25
-	bool
-	select ARCH_MXC_IOMUX_V3
-	select CPU_ARM926T
-	select MXC_AVIC
-	select PINCTRL_IMX25
-
 config SOC_IMX27
 	bool
 	select CPU_ARM926T
@@ -149,62 +142,6 @@ config MACH_MX21ADS
 	  Include support for MX21ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
-comment "MX25 platforms:"
-
-config MACH_MX25_3DS
-	bool "Support MX25PDK (3DS) Platform"
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select SOC_IMX25
-
-config MACH_EUKREA_CPUIMX25SD
-	bool "Support Eukrea CPUIMX25 Platform"
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select USB_ULPI_VIEWPORT if USB_ULPI
-	select SOC_IMX25
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX25SD
-	default MACH_EUKREA_MBIMXSD25_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD25_BASEBOARD
-	bool "Eukrea MBIMXSD development board"
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
-config MACH_IMX25_DT
-	bool "Support i.MX25 platforms from device tree"
-	select SOC_IMX25
-	help
-	  Include support for Freescale i.MX25 based platforms
-	  using the device tree for discovery
-
 comment "MX27 platforms:"
 
 config MACH_MX27ADS
@@ -557,6 +494,20 @@ config MACH_VPR200
 
 endif
 
+if ARCH_MULTI_V5
+
+comment "Device tree only"
+
+config SOC_IMX25
+	bool "i.MX25 support"
+	select ARCH_MXC_IOMUX_V3
+	select CPU_ARM926T
+	select MXC_AVIC
+	select PINCTRL_IMX25
+	help
+	  This enables support for Freescale i.MX25 processor
+endif
+
 if ARCH_MULTI_V7
 
 comment "Device tree only"
@@ -637,7 +588,7 @@ config SOC_VF610
 	select PL310_ERRATA_769419 if CACHE_L2X0
 
 	help
-	  This enable support for Freescale Vybrid VF610 processor.
+	  This enables support for Freescale Vybrid VF610 processor.
 
 choice
 	prompt "Clocksource for scheduler clock"
@@ -667,7 +618,7 @@ config SOC_LS1021A
 	select ZONE_DMA if ARM_LPAE
 
 	help
-	  This enable support for Freescale LS1021A processor.
+	  This enables support for Freescale LS1021A processor.
 
 endif