Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups on various subarchitectures from Olof Johansson:
 "Cleanup patches for various ARM platforms and some of their associated
  drivers.  There's also a branch in here that enables Freescale i.MX to
  be part of the multiplatform support -- the first "big" SoC that is
  moved over (more multiplatform work comes in a separate branch later
  during the merge window)."

Conflicts fixed as per Olof, including a silent semantic one in
arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to
omap3xxx_restart(), and a new user of the old name was added).

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits)
  ARM: omap: fix typo on timer cleanup
  ARM: EXYNOS: Remove unused regs-mem.h file
  ARM: EXYNOS: Remove unused non-dt support for dwmci controller
  ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan
  ARM: OMAP3: cm-t3517: use GPTIMER for system clock
  ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
  ARM: SAMSUNG: use devm_ functions for ADC driver
  ARM: EXYNOS: no duplicate mask/unmask in eint0_15
  ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443
  ARM: EXYNOS: Remove i2c0 resource information and setting of device names
  ARM: Kirkwood: checkpatch cleanups
  ARM: Kirkwood: Fix sparse warnings.
  ARM: Kirkwood: Remove unused includes
  ARM: kirkwood: cleanup lsxl board includes
  ARM: integrator: use BUG_ON where possible
  ARM: integrator: push down SC dependencies
  ARM: integrator: delete static UART1 mapping
  ARM: integrator: delete SC mapping on the CP
  ARM: integrator: remove static CP syscon mapping
  ARM: integrator: remove static AP syscon mapping
  ...

drivers/mmc/host/mxcmmc.c

@@ -41,7 +41,6 @@
 #include <linux/platform_data/mmc-mxcmmc.h>
 
 #include <linux/platform_data/dma-imx.h>
-#include <mach/hardware.h>
 
 #define DRIVER_NAME "mxc-mmc"
 #define MXCMCI_TIMEOUT_MS 10000
@@ -113,6 +112,11 @@
 #define INT_WRITE_OP_DONE_EN		(1 << 1)
 #define INT_READ_OP_EN			(1 << 0)
 
+enum mxcmci_type {
+	IMX21_MMC,
+	IMX31_MMC,
+};
+
 struct mxcmci_host {
 	struct mmc_host		*mmc;
 	struct resource		*res;
@@ -153,8 +157,27 @@ struct mxcmci_host {
 	struct imx_dma_data	dma_data;
 
 	struct timer_list	watchdog;
+	enum mxcmci_type	devtype;
 };
 
+static struct platform_device_id mxcmci_devtype[] = {
+	{
+		.name = "imx21-mmc",
+		.driver_data = IMX21_MMC,
+	}, {
+		.name = "imx31-mmc",
+		.driver_data = IMX31_MMC,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, mxcmci_devtype);
+
+static inline int is_imx31_mmc(struct mxcmci_host *host)
+{
+	return host->devtype == IMX31_MMC;
+}
+
 static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
 
 static inline void mxcmci_init_ocr(struct mxcmci_host *host)
@@ -843,6 +866,8 @@ static void mxcmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
 
 static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card)
 {
+	struct mxcmci_host *mxcmci = mmc_priv(host);
+
 	/*
 	 * MX3 SoCs have a silicon bug which corrupts CRC calculation of
 	 * multi-block transfers when connected SDIO peripheral doesn't
@@ -850,7 +875,7 @@ static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card)
 	 * One way to prevent this is to only allow 1-bit transfers.
 	 */
 
-	if (cpu_is_mx3() && card->type == MMC_TYPE_SDIO)
+	if (is_imx31_mmc(mxcmci) && card->type == MMC_TYPE_SDIO)
 		host->caps &= ~MMC_CAP_4_BIT_DATA;
 	else
 		host->caps |= MMC_CAP_4_BIT_DATA;
@@ -948,6 +973,7 @@ static int mxcmci_probe(struct platform_device *pdev)
 
 	host->mmc = mmc;
 	host->pdata = pdev->dev.platform_data;
+	host->devtype = pdev->id_entry->driver_data;
 	spin_lock_init(&host->lock);
 
 	mxcmci_init_ocr(host);
@@ -1120,6 +1146,7 @@ static const struct dev_pm_ops mxcmci_pm_ops = {
 static struct platform_driver mxcmci_driver = {
 	.probe		= mxcmci_probe,
 	.remove		= mxcmci_remove,
+	.id_table	= mxcmci_devtype,
 	.driver		= {
 		.name		= DRIVER_NAME,
 		.owner		= THIS_MODULE,