mmc: sdhci: add support for retuning mode 1
Host Controller v3.00 can support retuning modes 1,2 or 3 depending on the bits 46-47 of the Capabilities register. Also, the timer count for retuning is indicated by bits 40-43 of the same register. We initialize timer_list for retuning the first time we execute tuning procedure. This condition is indicated by SDHCI_NEEDS_RETUNING not being set. Since retuning mode 1 sets a limit of 4MB on the maximum data length, we set max_blk_count appropriately. Once the tuning timer expires, we set SDHCI_NEEDS_RETUNING flag, and if the flag is set, we execute tuning procedure before sending the next command. We need to restore mmc_request structure after executing retuning procedure since host->mrq is used inside the procedure to send CMD19. We also disable and re-enable this flag during suspend and resume respectively, as per the spec v3.00. Tested by Zhangfei Gao with a Toshiba uhs card and general hs card, on mmp2 in SDMA mode. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Reviewed-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Acked-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
This commit is contained in:
@@ -46,6 +46,8 @@ static void sdhci_finish_data(struct sdhci_host *);
|
||||
|
||||
static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
|
||||
static void sdhci_finish_command(struct sdhci_host *);
|
||||
static int sdhci_execute_tuning(struct mmc_host *mmc);
|
||||
static void sdhci_tuning_timer(unsigned long data);
|
||||
|
||||
static void sdhci_dumpregs(struct sdhci_host *host)
|
||||
{
|
||||
@@ -1206,8 +1208,27 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
||||
if (!present || host->flags & SDHCI_DEVICE_DEAD) {
|
||||
host->mrq->cmd->error = -ENOMEDIUM;
|
||||
tasklet_schedule(&host->finish_tasklet);
|
||||
} else
|
||||
} else {
|
||||
u32 present_state;
|
||||
|
||||
present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
|
||||
/*
|
||||
* Check if the re-tuning timer has already expired and there
|
||||
* is no on-going data transfer. If so, we need to execute
|
||||
* tuning procedure before sending command.
|
||||
*/
|
||||
if ((host->flags & SDHCI_NEEDS_RETUNING) &&
|
||||
!(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
|
||||
spin_unlock_irqrestore(&host->lock, flags);
|
||||
sdhci_execute_tuning(mmc);
|
||||
spin_lock_irqsave(&host->lock, flags);
|
||||
|
||||
/* Restore original mmc_request structure */
|
||||
host->mrq = mrq;
|
||||
}
|
||||
|
||||
sdhci_send_command(host, mrq->cmd);
|
||||
}
|
||||
|
||||
mmiowb();
|
||||
spin_unlock_irqrestore(&host->lock, flags);
|
||||
@@ -1673,6 +1694,37 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
|
||||
}
|
||||
|
||||
out:
|
||||
/*
|
||||
* If this is the very first time we are here, we start the retuning
|
||||
* timer. Since only during the first time, SDHCI_NEEDS_RETUNING
|
||||
* flag won't be set, we check this condition before actually starting
|
||||
* the timer.
|
||||
*/
|
||||
if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count &&
|
||||
(host->tuning_mode == SDHCI_TUNING_MODE_1)) {
|
||||
mod_timer(&host->tuning_timer, jiffies +
|
||||
host->tuning_count * HZ);
|
||||
/* Tuning mode 1 limits the maximum data length to 4MB */
|
||||
mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size;
|
||||
} else {
|
||||
host->flags &= ~SDHCI_NEEDS_RETUNING;
|
||||
/* Reload the new initial value for timer */
|
||||
if (host->tuning_mode == SDHCI_TUNING_MODE_1)
|
||||
mod_timer(&host->tuning_timer, jiffies +
|
||||
host->tuning_count * HZ);
|
||||
}
|
||||
|
||||
/*
|
||||
* In case tuning fails, host controllers which support re-tuning can
|
||||
* try tuning again at a later time, when the re-tuning timer expires.
|
||||
* So for these controllers, we return 0. Since there might be other
|
||||
* controllers who do not have this capability, we return error for
|
||||
* them.
|
||||
*/
|
||||
if (err && host->tuning_count &&
|
||||
host->tuning_mode == SDHCI_TUNING_MODE_1)
|
||||
err = 0;
|
||||
|
||||
sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier);
|
||||
spin_unlock(&host->lock);
|
||||
enable_irq(host->irq);
|
||||
@@ -1775,6 +1827,9 @@ static void sdhci_tasklet_finish(unsigned long param)
|
||||
|
||||
del_timer(&host->timer);
|
||||
|
||||
if (host->version >= SDHCI_SPEC_300)
|
||||
del_timer(&host->tuning_timer);
|
||||
|
||||
mrq = host->mrq;
|
||||
|
||||
/*
|
||||
@@ -1848,6 +1903,20 @@ static void sdhci_timeout_timer(unsigned long data)
|
||||
spin_unlock_irqrestore(&host->lock, flags);
|
||||
}
|
||||
|
||||
static void sdhci_tuning_timer(unsigned long data)
|
||||
{
|
||||
struct sdhci_host *host;
|
||||
unsigned long flags;
|
||||
|
||||
host = (struct sdhci_host *)data;
|
||||
|
||||
spin_lock_irqsave(&host->lock, flags);
|
||||
|
||||
host->flags |= SDHCI_NEEDS_RETUNING;
|
||||
|
||||
spin_unlock_irqrestore(&host->lock, flags);
|
||||
}
|
||||
|
||||
/*****************************************************************************\
|
||||
* *
|
||||
* Interrupt handling *
|
||||
@@ -2122,6 +2191,14 @@ int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
|
||||
|
||||
sdhci_disable_card_detection(host);
|
||||
|
||||
/* Disable tuning since we are suspending */
|
||||
if (host->version >= SDHCI_SPEC_300 && host->tuning_count &&
|
||||
host->tuning_mode == SDHCI_TUNING_MODE_1) {
|
||||
host->flags &= ~SDHCI_NEEDS_RETUNING;
|
||||
mod_timer(&host->tuning_timer, jiffies +
|
||||
host->tuning_count * HZ);
|
||||
}
|
||||
|
||||
ret = mmc_suspend_host(host->mmc);
|
||||
if (ret)
|
||||
return ret;
|
||||
@@ -2163,6 +2240,11 @@ int sdhci_resume_host(struct sdhci_host *host)
|
||||
ret = mmc_resume_host(host->mmc);
|
||||
sdhci_enable_card_detection(host);
|
||||
|
||||
/* Set the re-tuning expiration flag */
|
||||
if ((host->version >= SDHCI_SPEC_300) && host->tuning_count &&
|
||||
(host->tuning_mode == SDHCI_TUNING_MODE_1))
|
||||
host->flags |= SDHCI_NEEDS_RETUNING;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
@@ -2414,6 +2496,21 @@ int sdhci_add_host(struct sdhci_host *host)
|
||||
if (caps[1] & SDHCI_DRIVER_TYPE_D)
|
||||
mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
|
||||
|
||||
/* Initial value for re-tuning timer count */
|
||||
host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
|
||||
SDHCI_RETUNING_TIMER_COUNT_SHIFT;
|
||||
|
||||
/*
|
||||
* In case Re-tuning Timer is not disabled, the actual value of
|
||||
* re-tuning timer will be 2 ^ (n - 1).
|
||||
*/
|
||||
if (host->tuning_count)
|
||||
host->tuning_count = 1 << (host->tuning_count - 1);
|
||||
|
||||
/* Re-tuning mode supported by the Host Controller */
|
||||
host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >>
|
||||
SDHCI_RETUNING_MODE_SHIFT;
|
||||
|
||||
ocr_avail = 0;
|
||||
/*
|
||||
* According to SD Host Controller spec v3.00, if the Host System
|
||||
@@ -2559,9 +2656,15 @@ int sdhci_add_host(struct sdhci_host *host)
|
||||
|
||||
setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
|
||||
|
||||
if (host->version >= SDHCI_SPEC_300)
|
||||
if (host->version >= SDHCI_SPEC_300) {
|
||||
init_waitqueue_head(&host->buf_ready_int);
|
||||
|
||||
/* Initialize re-tuning timer */
|
||||
init_timer(&host->tuning_timer);
|
||||
host->tuning_timer.data = (unsigned long)host;
|
||||
host->tuning_timer.function = sdhci_tuning_timer;
|
||||
}
|
||||
|
||||
ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
|
||||
mmc_hostname(mmc), host);
|
||||
if (ret)
|
||||
@@ -2655,6 +2758,8 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
|
||||
free_irq(host->irq, host);
|
||||
|
||||
del_timer_sync(&host->timer);
|
||||
if (host->version >= SDHCI_SPEC_300)
|
||||
del_timer_sync(&host->tuning_timer);
|
||||
|
||||
tasklet_kill(&host->card_tasklet);
|
||||
tasklet_kill(&host->finish_tasklet);
|
||||
|
Reference in New Issue
Block a user