Merge tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is a calm cycle, not much happened this time around: not even
  much incremental development. Some three new drivers, that is all.

  No core changes.

  New drivers:

   - NXP (ex Freescale) i.MX 8QM driver.

   - NXP (ex Freescale) i.MX 8MM driver.

   - AT91 SAM9X60 subdriver.

  Improvements:

   - Support for external interrups (EINT) on Mediatek virtual GPIOs.

   - Make BCM2835 pin config fully generic.

   - Lots of Renesas SH-PFC incremental improvements"

* tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits)
  pinctrl: imx: fix scu link errors
  dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding
  pinctrl: qcom: spmi-gpio: Reorder debug print
  pinctrl: nomadik: fix possible object reference leak
  pinctrl: stm32: return error upon hwspinlock failure
  pinctrl: stm32: fix memory leak issue
  pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions
  pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions
  pinctrl: sh-pfc: Validate fixed-size field widths at build time
  pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups
  pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group
  pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group
  pinctrl: sh-pfc: emev2: Add missing pinmux functions
  pinctrl: sunxi: Support I/O bias voltage setting on A80
  pinctrl: ingenic: Add LCD pins for the JZ4725B SoC
  pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask
  pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl
  pinctrl: bcm2835: declare pin config as generic
  pinctrl: qcom: qcs404: Drop unused UFS_RESET macro
  dt-bindings: add documentation for slew rate
  ...

drivers/pinctrl/qcom/pinctrl-qcs404.c

@@ -95,31 +95,6 @@ enum {
 		.intr_detection_width = -1,		\
 	}
 
-#define UFS_RESET(pg_name, offset)				\
-	{						\
-		.name = #pg_name,			\
-		.pins = pg_name##_pins,			\
-		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
-		.ctl_reg = offset,			\
-		.io_reg = offset + 0x4,			\
-		.intr_cfg_reg = 0,			\
-		.intr_status_reg = 0,			\
-		.intr_target_reg = 0,			\
-		.tile = NORTH,				\
-		.mux_bit = -1,				\
-		.pull_bit = 3,				\
-		.drv_bit = 0,				\
-		.oe_bit = -1,				\
-		.in_bit = -1,				\
-		.out_bit = 0,				\
-		.intr_enable_bit = -1,			\
-		.intr_status_bit = -1,			\
-		.intr_target_bit = -1,			\
-		.intr_raw_status_bit = -1,		\
-		.intr_polarity_bit = -1,		\
-		.intr_detection_bit = -1,		\
-		.intr_detection_width = -1,		\
-	}
 static const struct pinctrl_pin_desc qcs404_pins[] = {
 	PINCTRL_PIN(0, "GPIO_0"),
 	PINCTRL_PIN(1, "GPIO_1"),

drivers/pinctrl/qcom/pinctrl-spmi-gpio.c

@@ -675,11 +675,11 @@ static void pmic_gpio_config_dbg_show(struct pinctrl_dev *pctldev,
 		else
 			seq_printf(s, " %-4s",
 					pad->output_enabled ? "out" : "in");
+		seq_printf(s, " %-4s", pad->out_value ? "high" : "low");
 		seq_printf(s, " %-7s", pmic_gpio_functions[function]);
 		seq_printf(s, " vin-%d", pad->power_source);
 		seq_printf(s, " %-27s", biases[pad->pullup]);
 		seq_printf(s, " %-10s", buffer_types[pad->buffer_type]);
-		seq_printf(s, " %-4s", pad->out_value ? "high" : "low");
 		seq_printf(s, " %-7s", strengths[pad->strength]);
 		seq_printf(s, " atest-%d", pad->atest);
 		seq_printf(s, " dtest-%d", pad->dtest_buffer);