brcmsmac: radio on led support

Add support for radio on led indicator. Control led via BCMA gpio driver. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> [arend@broadcom.com: modify Makefile for conditional compile led.c] Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-03 12:45:20 +01:00
parent 98929824ee
commit cd864522b3
6 changed files with 177 additions and 2 deletions
--- a/drivers/net/wireless/brcm80211/brcmsmac/led.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/led.c
@@ -0,0 +1,126 @@
+#include <net/mac80211.h>
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/gpio.h>
+
+#include "mac80211_if.h"
+#include "pub.h"
+#include "main.h"
+#include "led.h"
+
+	/* number of leds */
+#define  BRCMS_LED_NO		4
+	/* behavior mask */
+#define  BRCMS_LED_BEH_MASK	0x7f
+	/* activelow (polarity) bit */
+#define  BRCMS_LED_AL_MASK	0x80
+	/* radio enabled */
+#define  BRCMS_LED_RADIO	3
+
+static void brcms_radio_led_ctrl(struct brcms_info *wl, bool state)
+{
+	if (wl->radio_led.gpio == -1)
+		return;
+
+	if (wl->radio_led.active_low)
+		state = !state;
+
+	if (state)
+		gpio_set_value(wl->radio_led.gpio, 1);
+	else
+		gpio_set_value(wl->radio_led.gpio, 0);
+}
+
+
+/* Callback from the LED subsystem. */
+static void brcms_led_brightness_set(struct led_classdev *led_dev,
+				   enum led_brightness brightness)
+{
+	struct brcms_info *wl = container_of(led_dev,
+		struct brcms_info, led_dev);
+	brcms_radio_led_ctrl(wl, brightness);
+}
+
+void brcms_led_unregister(struct brcms_info *wl)
+{
+	if (wl->led_dev.dev)
+		led_classdev_unregister(&wl->led_dev);
+	if (wl->radio_led.gpio != -1)
+		gpio_free(wl->radio_led.gpio);
+}
+
+int brcms_led_register(struct brcms_info *wl)
+{
+	int i, err;
+	struct brcms_led *radio_led = &wl->radio_led;
+	/* get CC core */
+	struct bcma_drv_cc *cc_drv  = &wl->wlc->hw->d11core->bus->drv_cc;
+	struct gpio_chip *bcma_gpio = &cc_drv->gpio;
+	struct ssb_sprom *sprom = &wl->wlc->hw->d11core->bus->sprom;
+	u8 *leds[] = { &sprom->gpio0,
+		&sprom->gpio1,
+		&sprom->gpio2,
+		&sprom->gpio3 };
+	unsigned gpio = -1;
+	bool active_low = false;
+
+	/* none by default */
+	radio_led->gpio = -1;
+	radio_led->active_low = false;
+
+	if (!bcma_gpio || !gpio_is_valid(bcma_gpio->base))
+		return -ENODEV;
+
+	/* find radio enabled LED */
+	for (i = 0; i < BRCMS_LED_NO; i++) {
+		u8 led = *leds[i];
+		if ((led & BRCMS_LED_BEH_MASK) == BRCMS_LED_RADIO) {
+			gpio = bcma_gpio->base + i;
+			if (led & BRCMS_LED_AL_MASK)
+				active_low = true;
+			break;
+		}
+	}
+
+	if (gpio == -1 || !gpio_is_valid(gpio))
+		return -ENODEV;
+
+	/* request and configure LED gpio */
+	err = gpio_request_one(gpio,
+				active_low ? GPIOF_OUT_INIT_HIGH
+					: GPIOF_OUT_INIT_LOW,
+				"radio on");
+	if (err) {
+		wiphy_err(wl->wiphy, "requesting led gpio %d failed (err: %d)\n",
+			  gpio, err);
+		return err;
+	}
+	err = gpio_direction_output(gpio, 1);
+	if (err) {
+		wiphy_err(wl->wiphy, "cannot set led gpio %d to output (err: %d)\n",
+			  gpio, err);
+		return err;
+	}
+
+	snprintf(wl->radio_led.name, sizeof(wl->radio_led.name),
+		 "brcmsmac-%s:radio", wiphy_name(wl->wiphy));
+
+	wl->led_dev.name = wl->radio_led.name;
+	wl->led_dev.default_trigger =
+		ieee80211_get_radio_led_name(wl->pub->ieee_hw);
+	wl->led_dev.brightness_set = brcms_led_brightness_set;
+	err = led_classdev_register(wiphy_dev(wl->wiphy), &wl->led_dev);
+
+	if (err) {
+		wiphy_err(wl->wiphy, "cannot register led device: %s (err: %d)\n",
+			  wl->radio_led.name, err);
+		return err;
+	}
+
+	wiphy_info(wl->wiphy, "registered radio enabled led device: %s gpio: %d\n",
+		   wl->radio_led.name,
+		   gpio);
+	radio_led->gpio = gpio;
+	radio_led->active_low = active_low;
+
+	return 0;
+}