ARM: OMAP2: CM/PM: remove direct register accesses outside CM code

Users of the CM funtionality should not access the CM registers directly
by themselves. Thus, added new CM driver APIs for the OMAP2 specific
functionalities which support the existing direct register accesses, and
changed the platform code to use these. This is done in preparation
for moving the CM code into its own individual driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

arch/arm/mach-omap2/cm2xxx.c

@@ -327,6 +327,73 @@ struct clkdm_ops omap2_clkdm_operations = {
 	.clkdm_clk_disable	= omap2xxx_clkdm_clk_disable,
 };
 
+int omap2xxx_cm_fclks_active(void)
+{
+	u32 f1, f2;
+
+	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+	return (f1 | f2) ? 1 : 0;
+}
+
+int omap2xxx_cm_mpu_retention_allowed(void)
+{
+	u32 l;
+
+	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
+		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
+		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
+		return 0;
+	/* Check for UART3. */
+	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	if (l & OMAP24XX_EN_UART3_MASK)
+		return 0;
+
+	return 1;
+}
+
+u32 omap2xxx_cm_get_core_clk_src(void)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	return v;
+}
+
+u32 omap2xxx_cm_get_core_pll_config(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+}
+
+u32 omap2xxx_cm_get_pll_config(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+}
+
+u32 omap2xxx_cm_get_pll_status(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+}
+
+void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
+{
+	u32 tmp;
+
+	omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL);
+	omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL);
+	omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL);
+	tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
+		OMAP24XX_CLKSEL_DSS2_MASK;
+	omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
+	if (cpu_is_omap2430())
+		omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
+}
+
 /*
  *
  */