Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (29 commits)
  [POWERPC] Fix rheap alignment problem
  [POWERPC] Use check_legacy_ioport() for ISAPnP
  [POWERPC] Avoid NULL pointer in gpio1_interrupt
  [POWERPC] Enable generic rtc hook for the MPC8349 mITX
  [POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class
  [POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot
  [POWERPC] fix spin lock nesting in hvc_iseries
  [POWERPC] EEH failure to mark pci slot as frozen.
  [POWERPC] update powerpc defconfig files after libata kconfig breakage
  [POWERPC] enable sysrq in pmac32_defconfig
  [POWERPC] UPIO_TSI cleanup
  [POWERPC] rewrite mkprep and mkbugboot in sane C
  [POWERPC] maple/pci iomem annotations
  [POWERPC] powerpc oprofile __user annotations
  [POWERPC] cell spufs iomem annotations
  [POWERPC] NULL noise removal: spufs
  [POWERPC] ppc math-emu needs -fno-builtin-fabs for math.c and fabs.c
  [POWERPC] update mpc8349_itx_defconfig and remove some debug settings
  [POWERPC] Always call cede in pseries dedicated idle loop
  [POWERPC] Fix loop logic in irq_alloc_virt()
  ...

drivers/serial/8250.c

@@ -320,8 +320,8 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset)
 
 	case UPIO_TSI:
 		if (offset == UART_IIR) {
-			tmp = readl((u32 *)(up->port.membase + UART_RX));
-			return (cpu_to_le32(tmp) >> 8) & 0xff;
+			tmp = readl(up->port.membase + (UART_IIR & ~3));
+			return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
 		} else
 			return readb(up->port.membase + offset);
 

drivers/serial/cpm_uart/cpm_uart_core.c

@@ -46,6 +46,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/delay.h>
+#include <asm/fs_pd.h>
 
 #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -1022,15 +1023,17 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
 {
 	struct resource *r;
 	struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
-	int idx = pdata->fs_no;	/* It is UART_SMCx or UART_SCCx index */
+	int idx;	/* It is UART_SMCx or UART_SCCx index */
 	struct uart_cpm_port *pinfo;
 	int line;
 	u32 mem, pram;
 
+        idx = pdata->fs_no = fs_uart_get_id(pdata);
+
 	line = cpm_uart_id2nr(idx);
 	if(line < 0) {
 		printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx);
-		return -1;
+		return -EINVAL;
 	}
 
 	pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
@@ -1044,11 +1047,11 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
 
 	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
 		return -EINVAL;
-	mem = r->start;
+	mem = (u32)ioremap(r->start, r->end - r->start + 1);
 
 	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
 		return -EINVAL;
-	pram = r->start;
+	pram = (u32)ioremap(r->start, r->end - r->start + 1);
 
 	if(idx > fsid_smc2_uart) {
 		pinfo->sccp = (scc_t *)mem;
@@ -1179,7 +1182,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 		pdata = pdev->dev.platform_data;
 		if (pdata)
 			if (pdata->init_ioports)
-    	                	pdata->init_ioports();
+    	                	pdata->init_ioports(pdata);
 
 		cpm_uart_drv_get_platform_data(pdev, 1);
 	}
@@ -1189,11 +1192,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	if (options) {
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	} else {
-		bd_t *bd = (bd_t *) __res;
-
-		if (bd->bi_baudrate)
-			baud = bd->bi_baudrate;
-		else
+		if ((baud = uart_baudrate()) == -1)
 			baud = 9600;
 	}
 
@@ -1266,13 +1265,14 @@ static int cpm_uart_drv_probe(struct device *dev)
 	}
 
 	pdata = pdev->dev.platform_data;
-	pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
 
 	if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
 		return ret;
 
+	pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
+
 	if (pdata->init_ioports)
-                pdata->init_ioports();
+                pdata->init_ioports(pdata);
 
 	ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
 

drivers/serial/cpm_uart/cpm_uart_cpm2.c

@@ -40,6 +40,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/fs_pd.h>
 
 #include <linux/serial_core.h>
 #include <linux/kernel.h>
@@ -50,8 +51,9 @@
 
 void cpm_line_cr_cmd(int line, int cmd)
 {
-	volatile cpm_cpm2_t *cp = cpmp;
 	ulong val;
+	volatile cpm_cpm2_t *cp = cpm2_map(im_cpm);
+
 
 	switch (line) {
 	case UART_SMC1:
@@ -84,11 +86,14 @@ void cpm_line_cr_cmd(int line, int cmd)
 	}
 	cp->cp_cpcr = val;
 	while (cp->cp_cpcr & CPM_CR_FLG) ;
+
+	cpm2_unmap(cp);
 }
 
 void smc1_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
 
 	/* SMC1 is only on port D */
 	io->iop_ppard |= 0x00c00000;
@@ -97,13 +102,17 @@ void smc1_lineif(struct uart_cpm_port *pinfo)
 	io->iop_psord &= ~0x00c00000;
 
 	/* Wire BRG1 to SMC1 */
-	cpm2_immr->im_cpmux.cmx_smr &= 0x0f;
+	cpmux->cmx_smr &= 0x0f;
 	pinfo->brg = 1;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 void smc2_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
 
 	/* SMC2 is only on port A */
 	io->iop_ppara |= 0x00c00000;
@@ -112,13 +121,17 @@ void smc2_lineif(struct uart_cpm_port *pinfo)
 	io->iop_psora &= ~0x00c00000;
 
 	/* Wire BRG2 to SMC2 */
-	cpm2_immr->im_cpmux.cmx_smr &= 0xf0;
+	cpmux->cmx_smr &= 0xf0;
 	pinfo->brg = 2;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 void scc1_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
 
 	/* Use Port D for SCC1 instead of other functions.  */
 	io->iop_ppard |= 0x00000003;
@@ -128,9 +141,12 @@ void scc1_lineif(struct uart_cpm_port *pinfo)
 	io->iop_pdird |= 0x00000002;	/* Tx */
 
 	/* Wire BRG1 to SCC1 */
-	cpm2_immr->im_cpmux.cmx_scr &= 0x00ffffff;
-	cpm2_immr->im_cpmux.cmx_scr |= 0x00000000;
+	cpmux->cmx_scr &= 0x00ffffff;
+	cpmux->cmx_scr |= 0x00000000;
 	pinfo->brg = 1;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 void scc2_lineif(struct uart_cpm_port *pinfo)
@@ -143,43 +159,57 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
 	 * be supported in a sane fashion.
 	 */
 #ifndef CONFIG_STX_GP3
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
+
 	io->iop_pparb |= 0x008b0000;
 	io->iop_pdirb |= 0x00880000;
 	io->iop_psorb |= 0x00880000;
 	io->iop_pdirb &= ~0x00030000;
 	io->iop_psorb &= ~0x00030000;
 #endif
-	cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
-	cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
+	cpmux->cmx_scr &= 0xff00ffff;
+	cpmux->cmx_scr |= 0x00090000;
 	pinfo->brg = 2;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 void scc3_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
+
 	io->iop_pparb |= 0x008b0000;
 	io->iop_pdirb |= 0x00880000;
 	io->iop_psorb |= 0x00880000;
 	io->iop_pdirb &= ~0x00030000;
 	io->iop_psorb &= ~0x00030000;
-	cpm2_immr->im_cpmux.cmx_scr &= 0xffff00ff;
-	cpm2_immr->im_cpmux.cmx_scr |= 0x00001200;
+	cpmux->cmx_scr &= 0xffff00ff;
+	cpmux->cmx_scr |= 0x00001200;
 	pinfo->brg = 3;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 void scc4_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
+	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
 
 	io->iop_ppard |= 0x00000600;
 	io->iop_psord &= ~0x00000600;	/* Tx/Rx */
 	io->iop_pdird &= ~0x00000200;	/* Rx */
 	io->iop_pdird |= 0x00000400;	/* Tx */
 
-	cpm2_immr->im_cpmux.cmx_scr &= 0xffffff00;
-	cpm2_immr->im_cpmux.cmx_scr |= 0x0000001b;
+	cpmux->cmx_scr &= 0xffffff00;
+	cpmux->cmx_scr |= 0x0000001b;
 	pinfo->brg = 4;
+
+	cpm2_unmap(cpmux);
+	cpm2_unmap(io);
 }
 
 /*
@@ -254,88 +284,103 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 /* Setup any dynamic params in the uart desc */
 int cpm_uart_init_portdesc(void)
 {
+#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
+	u32 addr;
+#endif
 	pr_debug("CPM uart[-]:init portdesc\n");
 
 	cpm_uart_nr = 0;
 #ifdef CONFIG_SERIAL_CPM_SMC1
-	cpm_uart_ports[UART_SMC1].smcp = (smc_t *) & cpm2_immr->im_smc[0];
-	cpm_uart_ports[UART_SMC1].smcup =
-	    (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC1];
-	*(u16 *)(&cpm2_immr->im_dprambase[PROFF_SMC1_BASE]) = PROFF_SMC1;
+	cpm_uart_ports[UART_SMC1].smcp = (smc_t *) cpm2_map(im_smc[0]);
 	cpm_uart_ports[UART_SMC1].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_smc[0];
+	    (unsigned long)cpm_uart_ports[UART_SMC1].smcp;
+
+	cpm_uart_ports[UART_SMC1].smcup =
+	    (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC1], PROFF_SMC_SIZE);
+	addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC1_BASE], 2);
+	*addr = PROFF_SMC1;
+	cpm2_unmap(addr);
+
 	cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
 	cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
 #endif
 
 #ifdef CONFIG_SERIAL_CPM_SMC2
-	cpm_uart_ports[UART_SMC2].smcp = (smc_t *) & cpm2_immr->im_smc[1];
-	cpm_uart_ports[UART_SMC2].smcup =
-	    (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC2];
-	*(u16 *)(&cpm2_immr->im_dprambase[PROFF_SMC2_BASE]) = PROFF_SMC2;
+	cpm_uart_ports[UART_SMC2].smcp = (smc_t *) cpm2_map(im_smc[1]);
 	cpm_uart_ports[UART_SMC2].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_smc[1];
+	    (unsigned long)cpm_uart_ports[UART_SMC2].smcp;
+
+	cpm_uart_ports[UART_SMC2].smcup =
+	    (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC2], PROFF_SMC_SIZE);
+	addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC2_BASE], 2);
+	*addr = PROFF_SMC2;
+	cpm2_unmap(addr);
+
 	cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
 	cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
 #endif
 
 #ifdef CONFIG_SERIAL_CPM_SCC1
-	cpm_uart_ports[UART_SCC1].sccp = (scc_t *) & cpm2_immr->im_scc[0];
-	cpm_uart_ports[UART_SCC1].sccup =
-	    (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC1];
+	cpm_uart_ports[UART_SCC1].sccp = (scc_t *) cpm2_map(im_scc[0]);
 	cpm_uart_ports[UART_SCC1].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_scc[0];
+	    (unsigned long)cpm_uart_ports[UART_SCC1].sccp;
+	cpm_uart_ports[UART_SCC1].sccup =
+	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC1], PROFF_SCC_SIZE);
+
 	cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
 #endif
 
 #ifdef CONFIG_SERIAL_CPM_SCC2
-	cpm_uart_ports[UART_SCC2].sccp = (scc_t *) & cpm2_immr->im_scc[1];
-	cpm_uart_ports[UART_SCC2].sccup =
-	    (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC2];
+	cpm_uart_ports[UART_SCC2].sccp = (scc_t *) cpm2_map(im_scc[1]);
 	cpm_uart_ports[UART_SCC2].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_scc[1];
+	    (unsigned long)cpm_uart_ports[UART_SCC2].sccp;
+	cpm_uart_ports[UART_SCC2].sccup =
+	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC2], PROFF_SCC_SIZE);
+
 	cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
 #endif
 
 #ifdef CONFIG_SERIAL_CPM_SCC3
-	cpm_uart_ports[UART_SCC3].sccp = (scc_t *) & cpm2_immr->im_scc[2];
-	cpm_uart_ports[UART_SCC3].sccup =
-	    (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC3];
+	cpm_uart_ports[UART_SCC3].sccp = (scc_t *) cpm2_map(im_scc[2]);
 	cpm_uart_ports[UART_SCC3].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_scc[2];
+	    (unsigned long)cpm_uart_ports[UART_SCC3].sccp;
+	cpm_uart_ports[UART_SCC3].sccup =
+	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC3], PROFF_SCC_SIZE);
+
 	cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
 #endif
 
 #ifdef CONFIG_SERIAL_CPM_SCC4
-	cpm_uart_ports[UART_SCC4].sccp = (scc_t *) & cpm2_immr->im_scc[3];
-	cpm_uart_ports[UART_SCC4].sccup =
-	    (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC4];
+	cpm_uart_ports[UART_SCC4].sccp = (scc_t *) cpm2_map(im_scc[3]);
 	cpm_uart_ports[UART_SCC4].port.mapbase =
-	    (unsigned long)&cpm2_immr->im_scc[3];
+	    (unsigned long)cpm_uart_ports[UART_SCC4].sccp;
+	cpm_uart_ports[UART_SCC4].sccup =
+	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC4], PROFF_SCC_SIZE);
+
 	cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
 #endif
 

drivers/serial/cpm_uart/cpm_uart_cpm2.h

@@ -40,6 +40,6 @@ static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
 	up->smc_tfcr = CPMFCR_GBL | CPMFCR_EB;
 }
 
-#define DPRAM_BASE	((unsigned char *)&cpm2_immr->im_dprambase[0])
+#define DPRAM_BASE	((unsigned char *)cpm_dpram_addr(0))
 
 #endif