clk: imx: refine the powerdown bit of clk-pllv3

The powerdown bit is a bit confused, let's change it to power_bit
to relfect both powerdown and powerup case according to different
plls.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

drivers/clk/imx/clk-pllv3.c

@@ -29,8 +29,8 @@
  * struct clk_pllv3 - IMX PLL clock version 3
  * @clk_hw:	 clock source
  * @base:	 base address of PLL registers
- * @powerup_set: set POWER bit to power up the PLL
+ * @power_bit:	 pll power bit mask
- * @powerdown:   pll powerdown offset bit
+ * @powerup_set: set power_bit to power up the PLL
  * @div_mask:	 mask of divider bits
  * @div_shift:	 shift of divider bits
  *
@@ -40,8 +40,8 @@
 struct clk_pllv3 {
 	struct clk_hw	hw;
 	void __iomem	*base;
+	u32		power_bit;
 	bool		powerup_set;
-	u32		powerdown;
 	u32		div_mask;
 	u32		div_shift;
 	unsigned long	ref_clock;
@@ -52,7 +52,7 @@ struct clk_pllv3 {
 static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
 {
 	unsigned long timeout = jiffies + msecs_to_jiffies(10);
-	u32 val = readl_relaxed(pll->base) & pll->powerdown;
+	u32 val = readl_relaxed(pll->base) & pll->power_bit;
 
 	/* No need to wait for lock when pll is not powered up */
 	if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
@@ -77,9 +77,9 @@ static int clk_pllv3_prepare(struct clk_hw *hw)
 
 	val = readl_relaxed(pll->base);
 	if (pll->powerup_set)
-		val |= pll->powerdown;
+		val |= pll->power_bit;
 	else
-		val &= ~pll->powerdown;
+		val &= ~pll->power_bit;
 	writel_relaxed(val, pll->base);
 
 	return clk_pllv3_wait_lock(pll);
@@ -92,9 +92,9 @@ static void clk_pllv3_unprepare(struct clk_hw *hw)
 
 	val = readl_relaxed(pll->base);
 	if (pll->powerup_set)
-		val &= ~pll->powerdown;
+		val &= ~pll->power_bit;
 	else
-		val |= pll->powerdown;
+		val |= pll->power_bit;
 	writel_relaxed(val, pll->base);
 }
 
@@ -316,7 +316,7 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
 	if (!pll)
 		return ERR_PTR(-ENOMEM);
 
-	pll->powerdown = BM_PLL_POWER;
+	pll->power_bit = BM_PLL_POWER;
 
 	switch (type) {
 	case IMX_PLLV3_SYS:
@@ -332,7 +332,7 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
 		ops = &clk_pllv3_av_ops;
 		break;
 	case IMX_PLLV3_ENET_IMX7:
-		pll->powerdown = IMX7_ENET_PLL_POWER;
+		pll->power_bit = IMX7_ENET_PLL_POWER;
 		pll->ref_clock = 1000000000;
 		ops = &clk_pllv3_enet_ops;
 		break;