xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

iio: pressure: bmp280: add reset GPIO line handling

Browse Source 
On the APQ8060 Dragonboard the reset line to the BMP085 pressure
sensor is not deasserted on boot, so the driver needs to handle
this. For a simple GPIO line supplied as a descriptor (from a board
file, device tree or ACPI) this does the trick.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Linus Walleij
2016-06-30 03:48:47 +02:00
committed by Jonathan Cameron
parent 78f5027132
commit c5842b47b2
1 changed files with 10 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/iio/pressure/bmp280.c
View File

@@ -23,6 +23,7 @@
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/iio/iio.h> #include <linux/iio/iio.h>
#include <linux/iio/sysfs.h> #include <linux/iio/sysfs.h>
#include <linux/gpio/consumer.h>
/* BMP280 specific registers */ /* BMP280 specific registers */
#define BMP280_REG_HUMIDITY_LSB 0xFE #define BMP280_REG_HUMIDITY_LSB 0xFE
@@ -1024,6 +1025,7 @@ static int bmp280_probe(struct i2c_client *client,
struct iio_dev *indio_dev; struct iio_dev *indio_dev;
struct bmp280_data *data; struct bmp280_data *data;
unsigned int chip_id; unsigned int chip_id;
struct gpio_desc *gpiod;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev) if (!indio_dev)
@@ -1063,6 +1065,14 @@ static int bmp280_probe(struct i2c_client *client,
return -EINVAL; return -EINVAL;
} }
/* Bring chip out of reset if there is an assigned GPIO line */
gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
/* Deassert the signal */
if (!IS_ERR(gpiod)) {
dev_info(&client->dev, "release reset\n");
gpiod_set_value(gpiod, 0);
}
data->regmap = devm_regmap_init_i2c(client, data->regmap = devm_regmap_init_i2c(client,
data->chip_info->regmap_config); data->chip_info->regmap_config);
if (IS_ERR(data->regmap)) { if (IS_ERR(data->regmap)) {