Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits) [SCSI] scsi_dh_rdac: Add MD36xxf into device list [SCSI] scsi_debug: add consecutive medium errors [SCSI] libsas: fix ata list corruption issue [SCSI] hpsa: export resettable host attribute [SCSI] hpsa: move device attributes to avoid forward declarations [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26) [SCSI] sd: Logical Block Provisioning update [SCSI] Include protection operation in SCSI command trace [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try) [SCSI] target: Fix volume size misreporting for volumes > 2TB [SCSI] bnx2fc: Broadcom FCoE offload driver [SCSI] fcoe: fix broken fcoe interface reset [SCSI] fcoe: precedence bug in fcoe_filter_frames() [SCSI] libfcoe: Remove stale fcoe-netdev entries [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out" [SCSI] libfc: Fixing a memory leak when destroying an interface [SCSI] megaraid_sas: Version and Changelog update ... Fix up trivial conflicts due to whitespace differences in drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
2011-03-17 17:54:40 -07:00
commit c55d267de2
--- a/drivers/scsi/libsas/Kconfig
+++ b/drivers/scsi/libsas/Kconfig
@@ -46,11 +46,3 @@ config SCSI_SAS_HOST_SMP
 		Allows sas hosts to receive SMP frames.  Selecting this
 		option builds an SMP interpreter into libsas.  Say
 		N here if you want to save the few kb this consumes.
-
-config SCSI_SAS_LIBSAS_DEBUG
-	bool "Compile the SAS Domain Transport Attributes in debug mode"
-	default y
-	depends on SCSI_SAS_LIBSAS
-	help
-		Compiles the SAS Layer in debug mode.  In debug mode, the
-		SAS Layer prints diagnostic and debug messages.
--- a/drivers/scsi/libsas/Makefile
+++ b/drivers/scsi/libsas/Makefile
@@ -21,10 +21,6 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
 # USA

-ifeq ($(CONFIG_SCSI_SAS_LIBSAS_DEBUG),y)
-	EXTRA_CFLAGS += -DSAS_DEBUG
-endif
-
 obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas.o
 libsas-y +=  sas_init.o     \
 		sas_phy.o      \
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -71,13 +71,13 @@ static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
 		case SAS_SG_ERR:
 			return AC_ERR_INVALID;

-		case SAM_STAT_CHECK_CONDITION:
 		case SAS_OPEN_TO:
 		case SAS_OPEN_REJECT:
 			SAS_DPRINTK("%s: Saw error %d.  What to do?\n",
 				    __func__, ts->stat);
 			return AC_ERR_OTHER;

+		case SAM_STAT_CHECK_CONDITION:
 		case SAS_ABORTED_TASK:
 			return AC_ERR_DEV;

@@ -107,13 +107,15 @@ static void sas_ata_task_done(struct sas_task *task)
 	sas_ha = dev->port->ha;

 	spin_lock_irqsave(dev->sata_dev.ap->lock, flags);
-	if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD) {
+	if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
+	    ((stat->stat == SAM_STAT_CHECK_CONDITION &&
+	      dev->sata_dev.command_set == ATAPI_COMMAND_SET))) {
 		ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf);
 		qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command);
 		dev->sata_dev.sstatus = resp->sstatus;
 		dev->sata_dev.serror = resp->serror;
 		dev->sata_dev.scontrol = resp->scontrol;
-	} else if (stat->stat != SAM_STAT_GOOD) {
+	} else {
 		ac = sas_to_ata_err(stat);
 		if (ac) {
 			SAS_DPRINTK("%s: SAS error %x\n", __func__,
@@ -305,55 +307,6 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc)
 	}
 }

-static int sas_ata_scr_write(struct ata_link *link, unsigned int sc_reg_in,
-			      u32 val)
-{
-	struct domain_device *dev = link->ap->private_data;
-
-	SAS_DPRINTK("STUB %s\n", __func__);
-	switch (sc_reg_in) {
-		case SCR_STATUS:
-			dev->sata_dev.sstatus = val;
-			break;
-		case SCR_CONTROL:
-			dev->sata_dev.scontrol = val;
-			break;
-		case SCR_ERROR:
-			dev->sata_dev.serror = val;
-			break;
-		case SCR_ACTIVE:
-			dev->sata_dev.ap->link.sactive = val;
-			break;
-		default:
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static int sas_ata_scr_read(struct ata_link *link, unsigned int sc_reg_in,
-			    u32 *val)
-{
-	struct domain_device *dev = link->ap->private_data;
-
-	SAS_DPRINTK("STUB %s\n", __func__);
-	switch (sc_reg_in) {
-		case SCR_STATUS:
-			*val = dev->sata_dev.sstatus;
-			return 0;
-		case SCR_CONTROL:
-			*val = dev->sata_dev.scontrol;
-			return 0;
-		case SCR_ERROR:
-			*val = dev->sata_dev.serror;
-			return 0;
-		case SCR_ACTIVE:
-			*val = dev->sata_dev.ap->link.sactive;
-			return 0;
-		default:
-			return -EINVAL;
-	}
-}
-
 static struct ata_port_operations sas_sata_ops = {
 	.prereset		= ata_std_prereset,
 	.softreset		= NULL,
@@ -367,8 +320,6 @@ static struct ata_port_operations sas_sata_ops = {
 	.qc_fill_rtf		= sas_ata_qc_fill_rtf,
 	.port_start		= ata_sas_port_start,
 	.port_stop		= ata_sas_port_stop,
-	.scr_read		= sas_ata_scr_read,
-	.scr_write		= sas_ata_scr_write
 };

 static struct ata_port_info sata_port_info = {
@@ -801,7 +752,7 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost)

 		if (!dev_is_sata(ddev))
 			continue;
-		
+
 		ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata port error handler");
 		ata_scsi_port_error_handler(shost, ap);
 	}
@@ -834,13 +785,13 @@ int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
 		LIST_HEAD(sata_q);

 		ap = NULL;
-		
+
 		list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
 			struct domain_device *ddev = cmd_to_domain_dev(cmd);

 			if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd))
 				continue;
-			if(ap && ap != ddev->sata_dev.ap)
+			if (ap && ap != ddev->sata_dev.ap)
 				continue;
 			ap = ddev->sata_dev.ap;
 			rtn = 1;
@@ -848,8 +799,21 @@ int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
 		}

 		if (!list_empty(&sata_q)) {
-			ata_port_printk(ap, KERN_DEBUG,"sas eh calling libata cmd error handler\n");
+			ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata cmd error handler\n");
 			ata_scsi_cmd_error_handler(shost, ap, &sata_q);
+			/*
+			 * ata's error handler may leave the cmd on the list
+			 * so make sure they don't remain on a stack list
+			 * about to go out of scope.
+			 *
+			 * This looks strange, since the commands are
+			 * now part of no list, but the next error
+			 * action will be ata_port_error_handler()
+			 * which takes no list and sweeps them up
+			 * anyway from the ata tag array.
+			 */
+			while (!list_empty(&sata_q))
+				list_del_init(sata_q.next);
 		}
 	} while (ap);

--- a/drivers/scsi/libsas/sas_dump.c
+++ b/drivers/scsi/libsas/sas_dump.c
@@ -24,8 +24,6 @@

 #include "sas_dump.h"

-#ifdef SAS_DEBUG
-
 static const char *sas_hae_str[] = {
 	[0] = "HAE_RESET",
 };
@@ -72,5 +70,3 @@ void sas_dump_port(struct asd_sas_port *port)
 	SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
 	SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
 }
-
-#endif /* SAS_DEBUG */
--- a/drivers/scsi/libsas/sas_dump.h
+++ b/drivers/scsi/libsas/sas_dump.h
@@ -24,19 +24,7 @@

 #include "sas_internal.h"

-#ifdef SAS_DEBUG
-
 void sas_dprint_porte(int phyid, enum port_event pe);
 void sas_dprint_phye(int phyid, enum phy_event pe);
 void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he);
 void sas_dump_port(struct asd_sas_port *port);
-
-#else /* SAS_DEBUG */
-
-static inline void sas_dprint_porte(int phyid, enum port_event pe) { }
-static inline void sas_dprint_phye(int phyid, enum phy_event pe) { }
-static inline void sas_dprint_hae(struct sas_ha_struct *sas_ha,
-				  enum ha_event he) { }
-static inline void sas_dump_port(struct asd_sas_port *port) { }
-
-#endif /* SAS_DEBUG */
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -244,6 +244,11 @@ static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
 		 * dev to host FIS as described in section G.5 of
 		 * sas-2 r 04b */
 		dr = &((struct smp_resp *)disc_resp)->disc;
+		if (memcmp(dev->sas_addr, dr->attached_sas_addr,
+			  SAS_ADDR_SIZE) == 0) {
+			sas_printk("Found loopback topology, just ignore it!\n");
+			return 0;
+		}
 		if (!(dr->attached_dev_type == 0 &&
 		      dr->attached_sata_dev))
 			break;
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -33,11 +33,7 @@

 #define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)

-#ifdef SAS_DEBUG
-#define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
-#else
-#define SAS_DPRINTK(fmt, ...)
-#endif
+#define SAS_DPRINTK(fmt, ...) printk(KERN_DEBUG "sas: " fmt, ## __VA_ARGS__)

 #define TO_SAS_TASK(_scsi_cmd)  ((void *)(_scsi_cmd)->host_scribble)
 #define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -681,11 +681,10 @@ enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
 {
 	struct sas_task *task = TO_SAS_TASK(cmd);
 	unsigned long flags;
-	enum blk_eh_timer_return rtn; 
+	enum blk_eh_timer_return rtn;

 	if (sas_ata_timed_out(cmd, task, &rtn))
 		return rtn;
-	

 	if (!task) {
 		cmd->request->timeout /= 2;