Merge tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel into drm-next

- fbc improvements when stolen memory is tight (Ben)
- cdclk handling improvements for vlv/chv (Ville)
- proper fix for stuck primary planes on gmch platforms with cxsr (Imre&Ebgert
  Eich)
- gen8 hw semaphore support (Ben)
- more execlist prep work from Oscar Mateo
- locking fixes for primary planes (Matt Roper)
- code rework to support runtime pm for dpms on hsw/bdw (Paulo, Imre & me), but
  not yet enabled because some fixes from Paulo haven't made the cut
- more gpu boost tuning from Chris
- as usual piles of little things all over

* tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel: (93 commits)
  drm/i915: Make the RPS interrupt generation mask handle the vlv wa
  drm/i915: Move RPS evaluation interval counters to i915->rps
  drm/i915: Don't cast a pointer to void* unnecessarily
  drm/i915: don't read LVDS regs at compute_config time
  drm/i915: check the power domains in intel_lvds_get_hw_state()
  drm/i915: check the power domains in ironlake_get_pipe_config()
  drm/i915: don't skip shared DPLL assertion on LPT
  drm/i915: Only touch WRPLL hw state in enable/disable hooks
  drm/i915: Switch to common shared dpll framework for WRPLLs
  drm/i915: ->enable hook for WRPLLs
  drm/i915: ->disable hook for WRPLLs
  drm/i915: State readout support for WRPLLs
  drm/i915: add POWER_DOMAIN_PLLS
  drm/i915: Document that the pll->mode_set hook is optional
  drm/i915: Basic shared dpll support for WRPLLs
  drm/i915: Precompute static ddi_pll_sel values in encoders
  drm/i915: BDW also has special-purpose DP DDI clocks
  drm/i915: State readout and cross-checking for ddi_pll_sel
  drm/i915: Move ddi_pll_sel into the pipe config
  drm/i915: Add a debugfs file for the shared dpll state
  ...

drivers/gpu/drm/i915/intel_crt.c

@@ -137,6 +137,18 @@ static void hsw_crt_get_config(struct intel_encoder *encoder,
 	pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
 }
 
+static void hsw_crt_pre_enable(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL already enabled\n");
+	I915_WRITE(SPLL_CTL,
+		   SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC);
+	POSTING_READ(SPLL_CTL);
+	udelay(20);
+}
+
 /* Note: The caller is required to filter out dpms modes not supported by the
  * platform. */
 static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
@@ -194,6 +206,20 @@ static void intel_disable_crt(struct intel_encoder *encoder)
 	intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
 }
 
+
+static void hsw_crt_post_disable(struct intel_encoder *encoder)
+{
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t val;
+
+	DRM_DEBUG_KMS("Disabling SPLL\n");
+	val = I915_READ(SPLL_CTL);
+	WARN_ON(!(val & SPLL_PLL_ENABLE));
+	I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE);
+	POSTING_READ(SPLL_CTL);
+}
+
 static void intel_enable_crt(struct intel_encoder *encoder)
 {
 	struct intel_crt *crt = intel_encoder_to_crt(encoder);
@@ -289,8 +315,10 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder,
 		pipe_config->pipe_bpp = 24;
 
 	/* FDI must always be 2.7 GHz */
-	if (HAS_DDI(dev))
+	if (HAS_DDI(dev)) {
+		pipe_config->ddi_pll_sel = PORT_CLK_SEL_SPLL;
 		pipe_config->port_clock = 135000 * 2;
+	}
 
 	return true;
 }
@@ -860,6 +888,8 @@ void intel_crt_init(struct drm_device *dev)
 	if (HAS_DDI(dev)) {
 		crt->base.get_config = hsw_crt_get_config;
 		crt->base.get_hw_state = intel_ddi_get_hw_state;
+		crt->base.pre_enable = hsw_crt_pre_enable;
+		crt->base.post_disable = hsw_crt_post_disable;
 	} else {
 		crt->base.get_config = intel_crt_get_config;
 		crt->base.get_hw_state = intel_crt_get_hw_state;