ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.S

The omap1's debug-macro.S is similar to the generic 8250 code. Compared to
the 8520 code the omap1 macro automatically determines what UART to use
based on breadcrumbs left by the bootloader and automatically copes with
the eccentric register layout on OMAP7XX.

This patch drops both these features and relies instead on the generic
8250 macros:

1. Dropping support for the bootloader breadcrumbs is identical to the
   way the migration was handled for OMAP2 (see 808b7e07464d...).

2. Support for OMAP7XX still exists but it must be configured by hand
   (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: linux-omap@vger.kernel.org
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-omap1/include/mach/debug-macro.S

@@ -1,101 +0,0 @@
-/* arch/arm/mach-omap1/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/serial_reg.h>
-
-#include "serial.h"
-
-		.pushsection .data
-omap_uart_phys:	.word	0x0
-omap_uart_virt:	.word	0x0
-		.popsection
-
-		/*
-		 * Note that this code won't work if the bootloader passes
-		 * a wrong machine ID number in r1. To debug, just hardcode
-		 * the desired UART phys and virt addresses temporarily into
-		 * the omap_uart_phys and omap_uart_virt above.
-		 */
-		.macro	addruart, rp, rv, tmp
-
-		/* Use omap_uart_phys/virt if already configured */
-9:		adr	\rp, 99f		@ get effective addr of 99f
-		ldr	\rv, [\rp]		@ get absolute addr of 99f
-		sub	\rv, \rv, \rp		@ offset between the two
-		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
-		sub	\tmp, \rp, \rv		@ make it effective
-		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
-		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
-		cmp	\rp, #0			@ is port configured?
-		cmpne	\rv, #0
-		bne	100f			@ already configured
-
-		/* Check the debug UART configuration set in uncompress.h */
-		and	\rp, pc, #0xff000000
-		ldr	\rv, =OMAP_UART_INFO_OFS
-		ldr	\rp, [\rp, \rv]
-
-		/* Select the UART to use based on the UART1 scratchpad value */
-10:		cmp	\rp, #0			@ no port configured?
-		beq	11f			@ if none, try to use UART1
-		cmp	\rp, #OMAP1UART1
-		beq	11f			@ configure OMAP1UART1
-		cmp	\rp, #OMAP1UART2
-		beq	12f			@ configure OMAP1UART2
-		cmp	\rp, #OMAP1UART3
-		beq	13f			@ configure OMAP2UART3
-
-		/* Configure the UART offset from the phys/virt base */
-11:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		b	98f
-12:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
-		b	98f
-13:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
-		orr	\rp, \rp, #0x00009000	@ OMAP1UART3
-
-		/* Store both phys and virt address for the uart */
-98:		add	\rp, \rp, #0xff000000	@ phys base
-		str	\rp, [\tmp, #0]		@ omap_uart_phys
-		sub	\rp, \rp, #0xff000000	@ phys base
-		add	\rp, \rp, #0xfe000000	@ virt base
-		str	\rp, [\tmp, #4]		@ omap_uart_virt
-		b	9b
-
-		.align
-99:		.word	.
-		.word	omap_uart_phys
-		.ltorg
-
-100:
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
-		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		beq	1002f
-		ldrb	\rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
-		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		bne	1001b
-1002:
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm