Merge tag 'for-linus-20161216' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "Nothing enormous here, though notably we have some of the first work
  of a few new maintainers. I think for now I'll still be sending pull
  requests, but that's open to change in the future. Summary:

  Core:

   - dynamic BDI object allocation (resolves some problems when built as
     a module)
   - cleanups in the ooblayout handling

  NAND:

   - new tango NAND controller driver
   - new ox820 NAND controller driver
   - addition of a new full-ID entry in the nand_ids table
   - rework of the s3c240 driver to support DT
   - extension of the nand_sdr_timings to expose tCCS, tPROG and tR
   - addition of a new flag to ask the core to wait for tCCS when
     sending a RNDIN/RNDOUT command
   - addition of a new flag to ask the core to let the controller driver
     send the READ/PROGPAGE command

  Minor fixes/cleanup/cosmetic changes:

   - properly support 512 ECC step size in the sunxi driver
   - improve the error messages in the PXA probe path
   - fix module autoload in the omap2 driver
   - cleanup of several nand drivers to return nand_scan{_tail}() error
     code instead of returning -EIO
   - various cleanups in the denali driver
   - fix an error check in nandsim

  SPI NOR:

   - new flash IDs
   - wait for Spansion flash to be ready after quad-enable
   - error handling fixes for Candence QSPI
   - constify some structures in Freescale QSPI driver"

* tag 'for-linus-20161216' of git://git.infradead.org/linux-mtd: (71 commits)
  mtd: Allocate bdi objects dynamically
  mtd: nand: tango: Add standard legalese header
  mtd: maps: add missing iounmap() in error path
  mtd: spi-nor: constify fsl_qspi_devtype_data
  mtd: spi-nor: Add support for mr25h40
  mtd: spi-nor: Add support for N25Q016A
  mtd: spi-nor: Add at25df321 spi-nor flash support
  mtd: spi-nor: Fix some error codes in cqspi_setup_flash()
  mtd: spi-nor: Off by one in cqspi_setup_flash()
  mtd: spi-nor: add support for s25fl208k
  mtd: spi-nor: fix flags for s25fl128s
  mtd: spi-nor: fix spansion quad enable
  mtd: spi-nor: add Macronix mx25u25635f to list of known devices.
  mtd: mtdswap: fix spelling mistake "erassure" -> "erasure"
  mtd: bcm47xxpart: fix parsing first block after aligned TRX
  mtd: nand: tango: Use nand_to_mtd() instead of directly accessing chip->mtd
  mtd: remove unneeded initializer in mtd_ooblayout_count_bytes()
  mtd: use min_t() to refactor mtd_ooblayout_{get, set}_bytes()
  mtd: remove unneeded initializer in mtd_ooblayout_{get, set}_bytes()
  mtd: nand: nandsim: fix error check
  ...

Documentation/devicetree/bindings/mtd/oxnas-nand.txt

@@ -0,0 +1,41 @@
+* Oxford Semiconductor OXNAS NAND Controller
+
+Please refer to nand.txt for generic information regarding MTD NAND bindings.
+
+Required properties:
+ - compatible: "oxsemi,ox820-nand"
+ - reg: Base address and length for NAND mapped memory.
+
+Optional Properties:
+ - clocks: phandle to the NAND gate clock if needed.
+ - resets: phandle to the NAND reset control if needed.
+
+Example:
+
+nandc: nand-controller@41000000 {
+	compatible = "oxsemi,ox820-nand";
+	reg = <0x41000000 0x100000>;
+	clocks = <&stdclk CLK_820_NAND>;
+	resets = <&reset RESET_NAND>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "hamming";
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00e00000>;
+			read-only;
+		};
+
+		partition@e00000 {
+			label = "ubi";
+			reg = <0x00e00000 0x07200000>;
+		};
+	};
+};

Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt

@@ -0,0 +1,56 @@
+* Samsung S3C2410 and compatible NAND flash controller
+
+Required properties:
+- compatible : The possible values are:
+	"samsung,s3c2410-nand"
+	"samsung,s3c2412-nand"
+	"samsung,s3c2440-nand"
+- reg : register's location and length.
+- #address-cells, #size-cells : see nand.txt
+- clocks : phandle to the nand controller clock
+- clock-names : must contain "nand"
+
+Optional child nodes:
+Child nodes representing the available nand chips.
+
+Optional child properties:
+- nand-ecc-mode : see nand.txt
+- nand-on-flash-bbt : see nand.txt
+
+Each child device node may optionally contain a 'partitions' sub-node,
+which further contains sub-nodes describing the flash partition mapping.
+See partition.txt for more detail.
+
+Example:
+
+nand-controller@4e000000 {
+	compatible = "samsung,s3c2440-nand";
+	reg = <0x4e000000 0x40>;
+
+	#address-cells = <1>;
+        #size-cells = <0>;
+
+	clocks = <&clocks HCLK_NAND>;
+	clock-names = "nand";
+
+	nand {
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x040000>;
+			};
+
+			partition@40000 {
+				label = "kernel";
+				reg = <0x040000 0x500000>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/mtd/tango-nand.txt

@@ -0,0 +1,38 @@
+Sigma Designs Tango4 NAND Flash Controller (NFC)
+
+Required properties:
+
+- compatible: "sigma,smp8758-nand"
+- reg: address/size of nfc_reg, nfc_mem, and pbus_reg
+- dmas: reference to the DMA channel used by the controller
+- dma-names: "nfc_sbox"
+- clocks: reference to the system clock
+- #address-cells: <1>
+- #size-cells: <0>
+
+Children nodes represent the available NAND chips.
+See Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
+
+Example:
+
+	nandc: nand-controller@2c000 {
+		compatible = "sigma,smp8758-nand";
+		reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>;
+		dmas = <&dma0 3>;
+		dma-names = "nfc_sbox";
+		clocks = <&clkgen SYS_CLK>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>; /* CS0 */
+			nand-ecc-strength = <14>;
+			nand-ecc-step-size = <1024>;
+		};
+
+		nand@1 {
+			reg = <1>; /* CS1 */
+			nand-ecc-strength = <14>;
+			nand-ecc-step-size = <1024>;
+		};
+	};