Merge commit '8700c95adb03' into timers/nohz

The full dynticks tree needs the latest RCU and sched
upstream updates in order to fix some dependencies.

Merge a common upstream merge point that has these
updates.

Conflicts:
	include/linux/perf_event.h
	kernel/rcutree.h
	kernel/rcutree_plugin.h

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

Documentation/RCU/checklist.txt

@@ -217,9 +217,14 @@ over a rather long period of time, but improvements are always welcome!
 	whether the increased speed is worth it.
 
 8.	Although synchronize_rcu() is slower than is call_rcu(), it
-	usually results in simpler code.  So, unless update performance
-	is critically important or the updaters cannot block,
-	synchronize_rcu() should be used in preference to call_rcu().
+	usually results in simpler code.  So, unless update performance is
+	critically important, the updaters cannot block, or the latency of
+	synchronize_rcu() is visible from userspace, synchronize_rcu()
+	should be used in preference to call_rcu().  Furthermore,
+	kfree_rcu() usually results in even simpler code than does
+	synchronize_rcu() without synchronize_rcu()'s multi-millisecond
+	latency.  So please take advantage of kfree_rcu()'s "fire and
+	forget" memory-freeing capabilities where it applies.
 
 	An especially important property of the synchronize_rcu()
 	primitive is that it automatically self-limits: if grace periods
@@ -268,7 +273,8 @@ over a rather long period of time, but improvements are always welcome!
 	e.	Periodically invoke synchronize_rcu(), permitting a limited
 		number of updates per grace period.
 
-	The same cautions apply to call_rcu_bh() and call_rcu_sched().
+	The same cautions apply to call_rcu_bh(), call_rcu_sched(),
+	call_srcu(), and kfree_rcu().
 
 9.	All RCU list-traversal primitives, which include
 	rcu_dereference(), list_for_each_entry_rcu(), and
@@ -296,9 +302,9 @@ over a rather long period of time, but improvements are always welcome!
 	all currently executing rcu_read_lock()-protected RCU read-side
 	critical sections complete.  It does -not- necessarily guarantee
 	that all currently running interrupts, NMIs, preempt_disable()
-	code, or idle loops will complete.  Therefore, if you do not have
-	rcu_read_lock()-protected read-side critical sections, do -not-
-	use synchronize_rcu().
+	code, or idle loops will complete.  Therefore, if your
+	read-side critical sections are protected by something other
+	than rcu_read_lock(), do -not- use synchronize_rcu().
 
 	Similarly, disabling preemption is not an acceptable substitute
 	for rcu_read_lock().  Code that attempts to use preemption
@@ -401,9 +407,9 @@ over a rather long period of time, but improvements are always welcome!
 	read-side critical sections.  It is the responsibility of the
 	RCU update-side primitives to deal with this.
 
-17.	Use CONFIG_PROVE_RCU, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and
-	the __rcu sparse checks to validate your RCU code.  These
-	can help find problems as follows:
+17.	Use CONFIG_PROVE_RCU, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the
+	__rcu sparse checks (enabled by CONFIG_SPARSE_RCU_POINTER) to
+	validate your RCU code.  These can help find problems as follows:
 
 	CONFIG_PROVE_RCU: check that accesses to RCU-protected data
 		structures are carried out under the proper RCU

Documentation/RCU/lockdep.txt

@@ -64,6 +64,11 @@ checking of rcu_dereference() primitives:
 		but retain the compiler constraints that prevent duplicating
 		or coalescsing.  This is useful when when testing the
 		value of the pointer itself, for example, against NULL.
+	rcu_access_index(idx):
+		Return the value of the index and omit all barriers, but
+		retain the compiler constraints that prevent duplicating
+		or coalescsing.  This is useful when when testing the
+		value of the index itself, for example, against -1.
 
 The rcu_dereference_check() check expression can be any boolean
 expression, but would normally include a lockdep expression.  However,

Documentation/RCU/rcubarrier.txt

@@ -79,7 +79,20 @@ complete. Pseudo-code using rcu_barrier() is as follows:
    2. Execute rcu_barrier().
    3. Allow the module to be unloaded.
 
-The rcutorture module makes use of rcu_barrier in its exit function
+There are also rcu_barrier_bh(), rcu_barrier_sched(), and srcu_barrier()
+functions for the other flavors of RCU, and you of course must match
+the flavor of rcu_barrier() with that of call_rcu().  If your module
+uses multiple flavors of call_rcu(), then it must also use multiple
+flavors of rcu_barrier() when unloading that module.  For example, if
+it uses call_rcu_bh(), call_srcu() on srcu_struct_1, and call_srcu() on
+srcu_struct_2(), then the following three lines of code will be required
+when unloading:
+
+ 1 rcu_barrier_bh();
+ 2 srcu_barrier(&srcu_struct_1);
+ 3 srcu_barrier(&srcu_struct_2);
+
+The rcutorture module makes use of rcu_barrier() in its exit function
 as follows:
 
  1 static void

Documentation/RCU/stallwarn.txt

@@ -92,14 +92,14 @@ If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set,
 more information is printed with the stall-warning message, for example:
 
 	INFO: rcu_preempt detected stall on CPU
-	0: (63959 ticks this GP) idle=241/3fffffffffffffff/0
+	0: (63959 ticks this GP) idle=241/3fffffffffffffff/0 softirq=82/543
 	   (t=65000 jiffies)
 
 In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is
 printed:
 
 	INFO: rcu_preempt detected stall on CPU
-	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer not pending
+	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 nonlazy_posted: 25 .D
 	   (t=65000 jiffies)
 
 The "(64628 ticks this GP)" indicates that this CPU has taken more
@@ -116,13 +116,28 @@ number between the two "/"s is the value of the nesting, which will
 be a small positive number if in the idle loop and a very large positive
 number (as shown above) otherwise.
 
-For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the CPU is
-not in the process of trying to force itself into dyntick-idle state, the
-"." indicates that the CPU has not given up forcing RCU into dyntick-idle
-mode (it would be "H" otherwise), and the "timer not pending" indicates
-that the CPU has not recently forced RCU into dyntick-idle mode (it
-would otherwise indicate the number of microseconds remaining in this
-forced state).
+The "softirq=" portion of the message tracks the number of RCU softirq
+handlers that the stalled CPU has executed.  The number before the "/"
+is the number that had executed since boot at the time that this CPU
+last noted the beginning of a grace period, which might be the current
+(stalled) grace period, or it might be some earlier grace period (for
+example, if the CPU might have been in dyntick-idle mode for an extended
+time period.  The number after the "/" is the number that have executed
+since boot until the current time.  If this latter number stays constant
+across repeated stall-warning messages, it is possible that RCU's softirq
+handlers are no longer able to execute on this CPU.  This can happen if
+the stalled CPU is spinning with interrupts are disabled, or, in -rt
+kernels, if a high-priority process is starving RCU's softirq handler.
+
+For CONFIG_RCU_FAST_NO_HZ kernels, the "last_accelerate:" prints the
+low-order 16 bits (in hex) of the jiffies counter when this CPU last
+invoked rcu_try_advance_all_cbs() from rcu_needs_cpu() or last invoked
+rcu_accelerate_cbs() from rcu_prepare_for_idle().  The "nonlazy_posted:"
+prints the number of non-lazy callbacks posted since the last call to
+rcu_needs_cpu().  Finally, an "L" indicates that there are currently
+no non-lazy callbacks ("." is printed otherwise, as shown above) and
+"D" indicates that dyntick-idle processing is enabled ("." is printed
+otherwise, for example, if disabled via the "nohz=" kernel boot parameter).
 
 
 Multiple Warnings From One Stall

Documentation/RCU/whatisRCU.txt

@@ -265,9 +265,9 @@ rcu_dereference()
 		rcu_read_lock();
 		p = rcu_dereference(head.next);
 		rcu_read_unlock();
-		x = p->address;
+		x = p->address;	/* BUG!!! */
 		rcu_read_lock();
-		y = p->data;
+		y = p->data;	/* BUG!!! */
 		rcu_read_unlock();
 
 	Holding a reference from one RCU read-side critical section