Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...

arch/mips/include/asm/mipsregs.h

@@ -653,6 +653,9 @@
 #define MIPS_CONF5_NF		(_ULCAST_(1) << 0)
 #define MIPS_CONF5_UFR		(_ULCAST_(1) << 2)
 #define MIPS_CONF5_MRP		(_ULCAST_(1) << 3)
+#define MIPS_CONF5_MVH		(_ULCAST_(1) << 5)
+#define MIPS_CONF5_FRE		(_ULCAST_(1) << 8)
+#define MIPS_CONF5_UFE		(_ULCAST_(1) << 9)
 #define MIPS_CONF5_MSAEN	(_ULCAST_(1) << 27)
 #define MIPS_CONF5_EVA		(_ULCAST_(1) << 28)
 #define MIPS_CONF5_CV		(_ULCAST_(1) << 29)
@@ -694,6 +697,7 @@
 #define MIPS_FPIR_W		(_ULCAST_(1) << 20)
 #define MIPS_FPIR_L		(_ULCAST_(1) << 21)
 #define MIPS_FPIR_F64		(_ULCAST_(1) << 22)
+#define MIPS_FPIR_FREP		(_ULCAST_(1) << 29)
 
 /*
  * Bits in the MIPS32 Memory Segmentation registers.
@@ -994,6 +998,39 @@ do {									\
 	local_irq_restore(__flags);					\
 } while (0)
 
+#define __readx_32bit_c0_register(source)				\
+({									\
+	unsigned int __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.set	mips32r2				\n"	\
+	"	.insn						\n"	\
+	"	# mfhc0 $1, %1					\n"	\
+	"	.word	(0x40410000 | ((%1 & 0x1f) << 11))	\n"	\
+	"	move	%0, $1					\n"	\
+	"	.set	pop					\n"	\
+	: "=r" (__res)							\
+	: "i" (source));						\
+	__res;								\
+})
+
+#define __writex_32bit_c0_register(register, value)			\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.set	mips32r2				\n"	\
+	"	move	$1, %0					\n"	\
+	"	# mthc0 $1, %1					\n"	\
+	"	.insn						\n"	\
+	"	.word	(0x40c10000 | ((%1 & 0x1f) << 11))	\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "r" (value), "i" (register));					\
+} while (0)
+
 #define read_c0_index()		__read_32bit_c0_register($0, 0)
 #define write_c0_index(val)	__write_32bit_c0_register($0, 0, val)
 
@@ -1003,9 +1040,15 @@ do {									\
 #define read_c0_entrylo0()	__read_ulong_c0_register($2, 0)
 #define write_c0_entrylo0(val)	__write_ulong_c0_register($2, 0, val)
 
+#define readx_c0_entrylo0()	__readx_32bit_c0_register(2)
+#define writex_c0_entrylo0(val)	__writex_32bit_c0_register(2, val)
+
 #define read_c0_entrylo1()	__read_ulong_c0_register($3, 0)
 #define write_c0_entrylo1(val)	__write_ulong_c0_register($3, 0, val)
 
+#define readx_c0_entrylo1()	__readx_32bit_c0_register(3)
+#define writex_c0_entrylo1(val)	__writex_32bit_c0_register(3, val)
+
 #define read_c0_conf()		__read_32bit_c0_register($3, 0)
 #define write_c0_conf(val)	__write_32bit_c0_register($3, 0, val)