Merge branch 'linus' into cpus4096

Conflicts: drivers/acpi/processor_throttling.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:00:54 +02:00
parent 82638844d9 5b664cb235
commit bb2c018b09
1704 changed files with 104278 additions and 193470 deletions
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -235,6 +235,9 @@ int acpi_check_region(resource_size_t start, resource_size_t n,
 int acpi_check_mem_region(resource_size_t start, resource_size_t n,
 		      const char *name);

+#ifdef CONFIG_PM_SLEEP
+void __init acpi_old_suspend_ordering(void);
+#endif /* CONFIG_PM_SLEEP */
 #else	/* CONFIG_ACPI */

 static inline int early_acpi_boot_init(void)
--- a/include/linux/adb.h
+++ b/include/linux/adb.h
@@ -84,7 +84,6 @@ enum adb_message {
    ADB_MSG_PRE_RESET,	/* Called before resetting the bus */
    ADB_MSG_POST_RESET	/* Called after resetting the bus (re-do init & register) */
 };
-extern struct adb_driver *adb_controller;
 extern struct blocking_notifier_head adb_client_list;

 int adb_request(struct adb_request *req, void (*done)(struct adb_request *),
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -985,6 +985,9 @@ static inline int bdev_integrity_enabled(struct block_device *bdev, int rw)

 static inline int blk_integrity_rq(struct request *rq)
 {
+	if (rq->bio == NULL)
+		return 0;
+
 	return bio_integrity(rq->bio);
 }

--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -165,8 +165,8 @@ struct configfs_item_operations {
 };

 struct configfs_group_operations {
-	struct config_item *(*make_item)(struct config_group *group, const char *name);
-	struct config_group *(*make_group)(struct config_group *group, const char *name);
+	int (*make_item)(struct config_group *group, const char *name, struct config_item **new_item);
+	int (*make_group)(struct config_group *group, const char *name, struct config_group **new_group);
 	int (*commit_item)(struct config_item *item);
 	void (*disconnect_notify)(struct config_group *group, struct config_item *item);
 	void (*drop_item)(struct config_group *group, struct config_item *item);
--- a/include/linux/crc-t10dif.h
+++ b/include/linux/crc-t10dif.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_CRC_T10DIF_H
+#define _LINUX_CRC_T10DIF_H
+
+#include <linux/types.h>
+
+__u16 crc_t10dif(unsigned char const *, size_t);
+
+#endif
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -68,6 +68,8 @@ struct bus_type {
 	int (*resume_early)(struct device *dev);
 	int (*resume)(struct device *dev);

+	struct pm_ext_ops *pm;
+
 	struct bus_type_private *p;
 };

@@ -131,6 +133,8 @@ struct device_driver {
 	int (*resume) (struct device *dev);
 	struct attribute_group **groups;

+	struct pm_ops *pm;
+
 	struct driver_private *p;
 };

@@ -197,6 +201,8 @@ struct class {

 	int (*suspend)(struct device *dev, pm_message_t state);
 	int (*resume)(struct device *dev);
+
+	struct pm_ops *pm;
 };

 extern int __must_check class_register(struct class *class);
@@ -248,8 +254,11 @@ struct device_type {
 	struct attribute_group **groups;
 	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
 	void (*release)(struct device *dev);
+
 	int (*suspend)(struct device *dev, pm_message_t state);
 	int (*resume)(struct device *dev);
+
+	struct pm_ops *pm;
 };

 /* interface for exporting device attributes */
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -358,6 +358,7 @@ typedef struct elf64_shdr {
 #define NT_PRXFPREG     0x46e62b7f      /* copied from gdb5.1/include/elf/common.h */
 #define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
 #define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
+#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
 #define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */


--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -127,6 +127,15 @@ static inline void set_freezable(void)
 	current->flags &= ~PF_NOFREEZE;
 }

+/*
+ * Tell the freezer that the current task should be frozen by it and that it
+ * should send a fake signal to the task to freeze it.
+ */
+static inline void set_freezable_with_signal(void)
+{
+	current->flags &= ~(PF_NOFREEZE | PF_FREEZER_NOSIG);
+}
+
 /*
 * Freezer-friendly wrappers around wait_event_interruptible() and
 * wait_event_interruptible_timeout(), originally defined in <linux/wait.h>
@@ -174,6 +183,7 @@ static inline void freezer_do_not_count(void) {}
 static inline void freezer_count(void) {}
 static inline int freezer_should_skip(struct task_struct *p) { return 0; }
 static inline void set_freezable(void) {}
+static inline void set_freezable_with_signal(void) {}

 #define wait_event_freezable(wq, condition)				\
 		wait_event_interruptible(wq, condition)
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1729,6 +1729,8 @@ static inline void invalidate_remote_inode(struct inode *inode)
 extern int invalidate_inode_pages2(struct address_space *mapping);
 extern int invalidate_inode_pages2_range(struct address_space *mapping,
 					 pgoff_t start, pgoff_t end);
+extern void generic_sync_sb_inodes(struct super_block *sb,
+				struct writeback_control *wbc);
 extern int write_inode_now(struct inode *, int);
 extern int filemap_fdatawrite(struct address_space *);
 extern int filemap_flush(struct address_space *);
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -138,6 +138,12 @@ struct ide_io_ports {
 #define WAIT_CMD	(10*HZ)	/* 10sec  - maximum wait for an IRQ to happen */
 #define WAIT_MIN_SLEEP	(2*HZ/100)	/* 20msec - minimum sleep time */

+/*
+ * Op codes for special requests to be handled by ide_special_rq().
+ * Values should be in the range of 0x20 to 0x3f.
+ */
+#define REQ_DRIVE_RESET		0x20
+
 /*
 * Check for an interrupt and acknowledge the interrupt status
 */
@@ -171,7 +177,7 @@ typedef struct hw_regs_s {
 	int		irq;			/* our irq number */
 	ide_ack_intr_t	*ack_intr;		/* acknowledge interrupt */
 	hwif_chipset_t  chipset;
-	struct device	*dev;
+	struct device	*dev, *parent;
 } hw_regs_t;

 void ide_init_port_data(struct hwif_s *, unsigned int);
@@ -405,8 +411,8 @@ typedef struct ide_drive_s {
 struct ide_port_info;

 struct ide_port_ops {
-	/* host specific initialization of devices on a port */
-	void	(*port_init_devs)(struct hwif_s *);
+	/* host specific initialization of a device */
+	void	(*init_dev)(ide_drive_t *);
 	/* routine to program host for PIO mode */
 	void	(*set_pio_mode)(ide_drive_t *, const u8);
 	/* routine to program host for DMA mode */
@@ -565,8 +571,6 @@ typedef struct hwgroup_s {
 	unsigned int sleeping	: 1;
 		/* BOOL: polling active & poll_timeout field valid */
 	unsigned int polling	: 1;
-	 	/* BOOL: in a polling reset situation. Must not trigger another reset yet */
-	unsigned int resetting  : 1;

 		/* current drive */
 	ide_drive_t *drive;
@@ -786,7 +790,6 @@ struct ide_driver_s {
 	ide_startstop_t	(*do_request)(ide_drive_t *, struct request *, sector_t);
 	int		(*end_request)(ide_drive_t *, int, int);
 	ide_startstop_t	(*error)(ide_drive_t *, struct request *rq, u8, u8);
-	ide_startstop_t	(*abort)(ide_drive_t *, struct request *rq);
 	struct device_driver	gen_driver;
 	int		(*probe)(ide_drive_t *);
 	void		(*remove)(ide_drive_t *);
@@ -801,18 +804,6 @@ struct ide_driver_s {

 int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);

-/*
- * ide_hwifs[] is the master data structure used to keep track
- * of just about everything in ide.c.  Whenever possible, routines
- * should be using pointers to a drive (ide_drive_t *) or
- * pointers to a hwif (ide_hwif_t *), rather than indexing this
- * structure directly (the allocation/layout may change!).
- *
- */
-#ifndef _IDE_C
-extern	ide_hwif_t	ide_hwifs[];		/* master data repository */
-#endif
-
 extern int ide_vlb_clk;
 extern int ide_pci_clk;

@@ -840,10 +831,6 @@ ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);

 ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);

-ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
-
-extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
-
 extern void ide_fix_driveid(struct hd_driveid *);

 extern void ide_fixstring(u8 *, const int, const int);
@@ -1271,16 +1258,43 @@ static inline int ide_dev_is_sata(struct hd_driveid *id)
 u64 ide_get_lba_addr(struct ide_taskfile *, int);
 u8 ide_dump_status(ide_drive_t *, const char *, u8);

-typedef struct ide_pio_timings_s {
-	int	setup_time;	/* Address setup (ns) minimum */
-	int	active_time;	/* Active pulse (ns) minimum */
-	int	cycle_time;	/* Cycle time (ns) minimum = */
-				/* active + recovery (+ setup for some chips) */
-} ide_pio_timings_t;
+struct ide_timing {
+	u8  mode;
+	u8  setup;	/* t1 */
+	u16 act8b;	/* t2 for 8-bit io */
+	u16 rec8b;	/* t2i for 8-bit io */
+	u16 cyc8b;	/* t0 for 8-bit io */
+	u16 active;	/* t2 or tD */
+	u16 recover;	/* t2i or tK */
+	u16 cycle;	/* t0 */
+	u16 udma;	/* t2CYCTYP/2 */
+};
+
+enum {
+	IDE_TIMING_SETUP	= (1 << 0),
+	IDE_TIMING_ACT8B	= (1 << 1),
+	IDE_TIMING_REC8B	= (1 << 2),
+	IDE_TIMING_CYC8B	= (1 << 3),
+	IDE_TIMING_8BIT		= IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
+				  IDE_TIMING_CYC8B,
+	IDE_TIMING_ACTIVE	= (1 << 4),
+	IDE_TIMING_RECOVER	= (1 << 5),
+	IDE_TIMING_CYCLE	= (1 << 6),
+	IDE_TIMING_UDMA		= (1 << 7),
+	IDE_TIMING_ALL		= IDE_TIMING_SETUP | IDE_TIMING_8BIT |
+				  IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
+				  IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
+};
+
+struct ide_timing *ide_timing_find_mode(u8);
+u16 ide_pio_cycle_time(ide_drive_t *, u8);
+void ide_timing_merge(struct ide_timing *, struct ide_timing *,
+		      struct ide_timing *, unsigned int);
+int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
+
+int ide_scan_pio_blacklist(char *);

-unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
-extern const ide_pio_timings_t ide_pio_timings[6];

 int ide_set_pio_mode(ide_drive_t *, u8);
 int ide_set_dma_mode(ide_drive_t *, u8);
--- a/include/linux/inet.h
+++ b/include/linux/inet.h
@@ -44,6 +44,13 @@

 #include <linux/types.h>

+/*
+ * These mimic similar macros defined in user-space for inet_ntop(3).
+ * See /usr/include/netinet/in.h .
+ */
+#define INET_ADDRSTRLEN		(16)
+#define INET6_ADDRSTRLEN	(48)
+
 extern __be32 in_aton(const char *str);
 extern int in4_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
 extern int in6_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -140,8 +140,8 @@ extern struct group_info init_groups;
 		.nr_cpus_allowed = NR_CPUS,				\
 	},								\
 	.tasks		= LIST_HEAD_INIT(tsk.tasks),			\
-	.ptrace_children= LIST_HEAD_INIT(tsk.ptrace_children),		\
-	.ptrace_list	= LIST_HEAD_INIT(tsk.ptrace_list),		\
+	.ptraced	= LIST_HEAD_INIT(tsk.ptraced),			\
+	.ptrace_entry	= LIST_HEAD_INIT(tsk.ptrace_entry),		\
 	.real_parent	= &tsk,						\
 	.parent		= &tsk,						\
 	.children	= LIST_HEAD_INIT(tsk.children),			\
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -59,6 +59,7 @@ struct resource_list {
 #define IORESOURCE_IRQ_HIGHLEVEL	(1<<2)
 #define IORESOURCE_IRQ_LOWLEVEL		(1<<3)
 #define IORESOURCE_IRQ_SHAREABLE	(1<<4)
+#define IORESOURCE_IRQ_OPTIONAL 	(1<<5)

 /* PnP DMA specific bits (IORESOURCE_BITS) */
 #define IORESOURCE_DMA_TYPE_MASK	(3<<0)
@@ -88,6 +89,10 @@ struct resource_list {
 #define IORESOURCE_MEM_SHADOWABLE	(1<<5)	/* dup: IORESOURCE_SHADOWABLE */
 #define IORESOURCE_MEM_EXPANSIONROM	(1<<6)

+/* PnP I/O specific bits (IORESOURCE_BITS) */
+#define IORESOURCE_IO_16BIT_ADDR	(1<<0)
+#define IORESOURCE_IO_FIXED		(1<<1)
+
 /* PCI ROM control bits (IORESOURCE_BITS) */
 #define IORESOURCE_ROM_ENABLE		(1<<0)	/* ROM is enabled, same as PCI_ROM_ADDRESS_ENABLE */
 #define IORESOURCE_ROM_SHADOW		(1<<1)	/* ROM is copy at C000:0 */
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -108,6 +108,7 @@ extern unsigned int kobjsize(const void *objp);

 #define VM_CAN_NONLINEAR 0x08000000	/* Has ->fault & does nonlinear pages */
 #define VM_MIXEDMAP	0x10000000	/* Can contain "struct page" and pure PFN pages */
+#define VM_SAO		0x20000000	/* Strong Access Ordering (powerpc) */

 #ifndef VM_STACK_DEFAULT_FLAGS		/* arch can override this */
 #define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -33,6 +33,32 @@ static inline void vm_unacct_memory(long pages)
 	vm_acct_memory(-pages);
 }

+/*
+ * Allow architectures to handle additional protection bits
+ */
+
+#ifndef arch_calc_vm_prot_bits
+#define arch_calc_vm_prot_bits(prot) 0
+#endif
+
+#ifndef arch_vm_get_page_prot
+#define arch_vm_get_page_prot(vm_flags) __pgprot(0)
+#endif
+
+#ifndef arch_validate_prot
+/*
+ * This is called from mprotect().  PROT_GROWSDOWN and PROT_GROWSUP have
+ * already been masked out.
+ *
+ * Returns true if the prot flags are valid
+ */
+static inline int arch_validate_prot(unsigned long prot)
+{
+	return (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM)) == 0;
+}
+#define arch_validate_prot arch_validate_prot
+#endif
+
 /*
 * Optimisation macro.  It is equivalent to:
 *      (x & bit1) ? bit2 : 0
@@ -51,7 +77,8 @@ calc_vm_prot_bits(unsigned long prot)
 {
 	return _calc_vm_trans(prot, PROT_READ,  VM_READ ) |
 	       _calc_vm_trans(prot, PROT_WRITE, VM_WRITE) |
-	       _calc_vm_trans(prot, PROT_EXEC,  VM_EXEC );
+	       _calc_vm_trans(prot, PROT_EXEC,  VM_EXEC) |
+	       arch_calc_vm_prot_bits(prot);
 }

 /*
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -135,6 +135,7 @@ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
 	struct mmc_command *, int);

 extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
+extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);

 extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
 extern void mmc_release_host(struct mmc_host *host);
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -51,8 +51,30 @@ struct mmc_ios {

 struct mmc_host_ops {
 	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+	/*
+	 * Avoid calling these three functions too often or in a "fast path",
+	 * since underlaying controller might implement them in an expensive
+	 * and/or slow way.
+	 *
+	 * Also note that these functions might sleep, so don't call them
+	 * in the atomic contexts!
+	 *
+	 * Return values for the get_ro callback should be:
+	 *   0 for a read/write card
+	 *   1 for a read-only card
+	 *   -ENOSYS when not supported (equal to NULL callback)
+	 *   or a negative errno value when something bad happened
+	 *
+	 * Return values for the get_ro callback should be:
+	 *   0 for a absent card
+	 *   1 for a present card
+	 *   -ENOSYS when not supported (equal to NULL callback)
+	 *   or a negative errno value when something bad happened
+	 */
 	void	(*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
 	int	(*get_ro)(struct mmc_host *host);
+	int	(*get_cd)(struct mmc_host *host);
+
 	void	(*enable_sdio_irq)(struct mmc_host *host, int enable);
 };

@@ -89,11 +111,11 @@ struct mmc_host {
 	unsigned long		caps;		/* Host capabilities */

 #define MMC_CAP_4_BIT_DATA	(1 << 0)	/* Can the host do 4 bit transfers */
-#define MMC_CAP_MULTIWRITE	(1 << 1)	/* Can accurately report bytes sent to card on error */
-#define MMC_CAP_MMC_HIGHSPEED	(1 << 2)	/* Can do MMC high-speed timing */
-#define MMC_CAP_SD_HIGHSPEED	(1 << 3)	/* Can do SD high-speed timing */
-#define MMC_CAP_SDIO_IRQ	(1 << 4)	/* Can signal pending SDIO IRQs */
-#define MMC_CAP_SPI		(1 << 5)	/* Talks only SPI protocols */
+#define MMC_CAP_MMC_HIGHSPEED	(1 << 1)	/* Can do MMC high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED	(1 << 2)	/* Can do SD high-speed timing */
+#define MMC_CAP_SDIO_IRQ	(1 << 3)	/* Can signal pending SDIO IRQs */
+#define MMC_CAP_SPI		(1 << 4)	/* Talks only SPI protocols */
+#define MMC_CAP_NEEDS_POLL	(1 << 5)	/* Needs polling for card-detection */

 	/* host specific block data */
 	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -16,7 +16,6 @@
 * Based strongly on code by:
 *
 * Author: Yong-iL Joh <tolkien@mizi.com>
- * Date  : $Date: 2002/06/18 12:37:30 $
 *
 * Author:  Andrew Christian
 *          15 May 2002
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -1,7 +1,7 @@
 /*
 *  include/linux/mmc/sdio_func.h
 *
- *  Copyright 2007 Pierre Ossman
+ *  Copyright 2007-2008 Pierre Ossman
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -46,6 +46,8 @@ struct sdio_func {
 	unsigned		max_blksize;	/* maximum block size */
 	unsigned		cur_blksize;	/* current block size */

+	unsigned		enable_timeout;	/* max enable timeout in msec */
+
 	unsigned int		state;		/* function state */
 #define SDIO_STATE_PRESENT	(1<<0)		/* present in sysfs */

@@ -120,23 +122,22 @@ extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
 extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
 extern int sdio_release_irq(struct sdio_func *func);

-extern unsigned char sdio_readb(struct sdio_func *func,
-	unsigned int addr, int *err_ret);
-extern unsigned short sdio_readw(struct sdio_func *func,
-	unsigned int addr, int *err_ret);
-extern unsigned long sdio_readl(struct sdio_func *func,
-	unsigned int addr, int *err_ret);
+extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz);
+
+extern u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret);
+extern u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret);
+extern u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret);

 extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
 	unsigned int addr, int count);
 extern int sdio_readsb(struct sdio_func *func, void *dst,
 	unsigned int addr, int count);

-extern void sdio_writeb(struct sdio_func *func, unsigned char b,
+extern void sdio_writeb(struct sdio_func *func, u8 b,
 	unsigned int addr, int *err_ret);
-extern void sdio_writew(struct sdio_func *func, unsigned short b,
+extern void sdio_writew(struct sdio_func *func, u16 b,
 	unsigned int addr, int *err_ret);
-extern void sdio_writel(struct sdio_func *func, unsigned long b,
+extern void sdio_writel(struct sdio_func *func, u32 b,
 	unsigned int addr, int *err_ret);

 extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -12,9 +12,19 @@
 #include <linux/magic.h>

 /* Default timeout values */
+#define NFS_DEF_UDP_TIMEO	(11)
+#define NFS_DEF_UDP_RETRANS	(3)
+#define NFS_DEF_TCP_TIMEO	(600)
+#define NFS_DEF_TCP_RETRANS	(2)
+
 #define NFS_MAX_UDP_TIMEOUT	(60*HZ)
 #define NFS_MAX_TCP_TIMEOUT	(600*HZ)

+#define NFS_DEF_ACREGMIN	(3)
+#define NFS_DEF_ACREGMAX	(60)
+#define NFS_DEF_ACDIRMIN	(30)
+#define NFS_DEF_ACDIRMAX	(60)
+
 /*
 * When flushing a cluster of dirty pages, there can be different
 * strategies:
--- a/include/linux/nfs_iostat.h
+++ b/include/linux/nfs_iostat.h
@@ -0,0 +1,119 @@
+/*
+ *  User-space visible declarations for NFS client per-mount
+ *  point statistics
+ *
+ *  Copyright (C) 2005, 2006 Chuck Lever <cel@netapp.com>
+ *
+ *  NFS client per-mount statistics provide information about the
+ *  health of the NFS client and the health of each NFS mount point.
+ *  Generally these are not for detailed problem diagnosis, but
+ *  simply to indicate that there is a problem.
+ *
+ *  These counters are not meant to be human-readable, but are meant
+ *  to be integrated into system monitoring tools such as "sar" and
+ *  "iostat".  As such, the counters are sampled by the tools over
+ *  time, and are never zeroed after a file system is mounted.
+ *  Moving averages can be computed by the tools by taking the
+ *  difference between two instantaneous samples  and dividing that
+ *  by the time between the samples.
+ */
+
+#ifndef _LINUX_NFS_IOSTAT
+#define _LINUX_NFS_IOSTAT
+
+#define NFS_IOSTAT_VERS		"1.0"
+
+/*
+ * NFS byte counters
+ *
+ * 1.  SERVER - the number of payload bytes read from or written
+ *     to the server by the NFS client via an NFS READ or WRITE
+ *     request.
+ *
+ * 2.  NORMAL - the number of bytes read or written by applications
+ *     via the read(2) and write(2) system call interfaces.
+ *
+ * 3.  DIRECT - the number of bytes read or written from files
+ *     opened with the O_DIRECT flag.
+ *
+ * These counters give a view of the data throughput into and out
+ * of the NFS client.  Comparing the number of bytes requested by
+ * an application with the number of bytes the client requests from
+ * the server can provide an indication of client efficiency
+ * (per-op, cache hits, etc).
+ *
+ * These counters can also help characterize which access methods
+ * are in use.  DIRECT by itself shows whether there is any O_DIRECT
+ * traffic.  NORMAL + DIRECT shows how much data is going through
+ * the system call interface.  A large amount of SERVER traffic
+ * without much NORMAL or DIRECT traffic shows that applications
+ * are using mapped files.
+ *
+ * NFS page counters
+ *
+ * These count the number of pages read or written via nfs_readpage(),
+ * nfs_readpages(), or their write equivalents.
+ *
+ * NB: When adding new byte counters, please include the measured
+ * units in the name of each byte counter to help users of this
+ * interface determine what exactly is being counted.
+ */
+enum nfs_stat_bytecounters {
+	NFSIOS_NORMALREADBYTES = 0,
+	NFSIOS_NORMALWRITTENBYTES,
+	NFSIOS_DIRECTREADBYTES,
+	NFSIOS_DIRECTWRITTENBYTES,
+	NFSIOS_SERVERREADBYTES,
+	NFSIOS_SERVERWRITTENBYTES,
+	NFSIOS_READPAGES,
+	NFSIOS_WRITEPAGES,
+	__NFSIOS_BYTESMAX,
+};
+
+/*
+ * NFS event counters
+ *
+ * These counters provide a low-overhead way of monitoring client
+ * activity without enabling NFS trace debugging.  The counters
+ * show the rate at which VFS requests are made, and how often the
+ * client invalidates its data and attribute caches.  This allows
+ * system administrators to monitor such things as how close-to-open
+ * is working, and answer questions such as "why are there so many
+ * GETATTR requests on the wire?"
+ *
+ * They also count anamolous events such as short reads and writes,
+ * silly renames due to close-after-delete, and operations that
+ * change the size of a file (such operations can often be the
+ * source of data corruption if applications aren't using file
+ * locking properly).
+ */
+enum nfs_stat_eventcounters {
+	NFSIOS_INODEREVALIDATE = 0,
+	NFSIOS_DENTRYREVALIDATE,
+	NFSIOS_DATAINVALIDATE,
+	NFSIOS_ATTRINVALIDATE,
+	NFSIOS_VFSOPEN,
+	NFSIOS_VFSLOOKUP,
+	NFSIOS_VFSACCESS,
+	NFSIOS_VFSUPDATEPAGE,
+	NFSIOS_VFSREADPAGE,
+	NFSIOS_VFSREADPAGES,
+	NFSIOS_VFSWRITEPAGE,
+	NFSIOS_VFSWRITEPAGES,
+	NFSIOS_VFSGETDENTS,
+	NFSIOS_VFSSETATTR,
+	NFSIOS_VFSFLUSH,
+	NFSIOS_VFSFSYNC,
+	NFSIOS_VFSLOCK,
+	NFSIOS_VFSRELEASE,
+	NFSIOS_CONGESTIONWAIT,
+	NFSIOS_SETATTRTRUNC,
+	NFSIOS_EXTENDWRITE,
+	NFSIOS_SILLYRENAME,
+	NFSIOS_SHORTREAD,
+	NFSIOS_SHORTWRITE,
+	NFSIOS_DELAY,
+	__NFSIOS_COUNTSMAX,
+};
+
+#endif	/* _LINUX_NFS_IOSTAT */
--- a/include/linux/nfs_page.h
+++ b/include/linux/nfs_page.h
@@ -27,9 +27,12 @@
 /*
 * Valid flags for a dirty buffer
 */
-#define PG_BUSY			0
-#define PG_NEED_COMMIT		1
-#define PG_NEED_RESCHED		2
+enum {
+	PG_BUSY = 0,
+	PG_CLEAN,
+	PG_NEED_COMMIT,
+	PG_NEED_RESCHED,
+};

 struct nfs_inode;
 struct nfs_page {
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -829,9 +829,8 @@ struct nfs_rpc_ops {
 	int	(*write_done)  (struct rpc_task *, struct nfs_write_data *);
 	void	(*commit_setup) (struct nfs_write_data *, struct rpc_message *);
 	int	(*commit_done) (struct rpc_task *, struct nfs_write_data *);
-	int	(*file_open)   (struct inode *, struct file *);
-	int	(*file_release) (struct inode *, struct file *);
 	int	(*lock)(struct file *, int, struct file_lock *);
+	int	(*lock_check_bounds)(const struct file_lock *);
 	void	(*clear_acl_cache)(struct inode *);
 };

--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -24,4 +24,7 @@ static inline void of_device_free(struct of_device *dev)
 	of_release_dev(&dev->dev);
 }

+extern ssize_t of_device_get_modalias(struct of_device *ofdev,
+					char *str, ssize_t len);
+
 #endif /* _LINUX_OF_DEVICE_H */
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -17,8 +17,7 @@
 #ifndef LINUX_PCI_H
 #define LINUX_PCI_H

-/* Include the pci register defines */
-#include <linux/pci_regs.h>
+#include <linux/pci_regs.h>	/* The pci register defines */

 /*
 * The PCI interface treats multi-function devices as independent
@@ -49,12 +48,22 @@
 #include <linux/list.h>
 #include <linux/compiler.h>
 #include <linux/errno.h>
+#include <linux/kobject.h>
 #include <asm/atomic.h>
 #include <linux/device.h>

 /* Include the ID list */
 #include <linux/pci_ids.h>

+/* pci_slot represents a physical slot */
+struct pci_slot {
+	struct pci_bus *bus;		/* The bus this slot is on */
+	struct list_head list;		/* node in list of slots on this bus */
+	struct hotplug_slot *hotplug;	/* Hotplug info (migrate over time) */
+	unsigned char number;		/* PCI_SLOT(pci_dev->devfn) */
+	struct kobject kobj;
+};
+
 /* File state for mmap()s on /proc/bus/pci/X/Y */
 enum pci_mmap_state {
 	pci_mmap_io,
@@ -142,6 +151,7 @@ struct pci_dev {

 	void		*sysdata;	/* hook for sys-specific extension */
 	struct proc_dir_entry *procent;	/* device entry in /proc/bus/pci */
+	struct pci_slot	*slot;		/* Physical slot this device is in */

 	unsigned int	devfn;		/* encoded device & function index */
 	unsigned short	vendor;
@@ -167,6 +177,13 @@ struct pci_dev {
 	pci_power_t     current_state;  /* Current operating state. In ACPI-speak,
 					   this is D0-D3, D0 being fully functional,
 					   and D3 being off. */
+	int		pm_cap;		/* PM capability offset in the
+					   configuration space */
+	unsigned int	pme_support:5;	/* Bitmask of states from which PME#
+					   can be generated */
+	unsigned int	d1_support:1;	/* Low power state D1 is supported */
+	unsigned int	d2_support:1;	/* Low power state D2 is supported */
+	unsigned int	no_d1d2:1;	/* Only allow D0 and D3 */

 #ifdef CONFIG_PCIEASPM
 	struct pcie_link_state	*link_state;	/* ASPM link state. */
@@ -191,7 +208,6 @@ struct pci_dev {
 	unsigned int	is_added:1;
 	unsigned int	is_busmaster:1; /* device is busmaster */
 	unsigned int	no_msi:1;	/* device may not use msi */
-	unsigned int	no_d1d2:1;   /* only allow d0 or d3 */
 	unsigned int	block_ucfg_access:1;	/* userspace config space access is blocked */
 	unsigned int	broken_parity_status:1;	/* Device generates false positive parity */
 	unsigned int 	msi_enabled:1;
@@ -267,6 +283,7 @@ struct pci_bus {
 	struct list_head children;	/* list of child buses */
 	struct list_head devices;	/* list of devices on this bus */
 	struct pci_dev	*self;		/* bridge device as seen by parent */
+	struct list_head slots;		/* list of slots on this bus */
 	struct resource	*resource[PCI_BUS_NUM_RESOURCES];
 					/* address space routed to this bus */

@@ -328,7 +345,7 @@ struct pci_bus_region {
 struct pci_dynids {
 	spinlock_t lock;            /* protects list, index */
 	struct list_head list;      /* for IDs added at runtime */
-	unsigned int use_driver_data:1; /* pci_driver->driver_data is used */
+	unsigned int use_driver_data:1; /* pci_device_id->driver_data is used */
 };

 /* ---------------------------------------------------------------- */
@@ -390,7 +407,7 @@ struct pci_driver {
 	int  (*resume_early) (struct pci_dev *dev);
 	int  (*resume) (struct pci_dev *dev);	                /* Device woken up */
 	void (*shutdown) (struct pci_dev *dev);
-
+	struct pm_ext_ops *pm;
 	struct pci_error_handlers *err_handler;
 	struct device_driver	driver;
 	struct pci_dynids dynids;
@@ -489,6 +506,10 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus,
 			       struct pci_ops *ops, void *sysdata);
 struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
 				int busnr);
+struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
+				 const char *name);
+void pci_destroy_slot(struct pci_slot *slot);
+void pci_update_slot_number(struct pci_slot *slot, int slot_nr);
 int pci_scan_slot(struct pci_bus *bus, int devfn);
 struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn);
 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus);
@@ -618,6 +639,8 @@ int pci_restore_state(struct pci_dev *dev);
 int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
 int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+int pci_prepare_to_sleep(struct pci_dev *dev);
+int pci_back_from_sleep(struct pci_dev *dev);

 /* Functions for PCI Hotplug drivers to use */
 int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
@@ -839,6 +862,11 @@ static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
 	return -EIO;
 }

+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return -EIO;
+}
+
 static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
 					unsigned int size)
 {
@@ -977,9 +1005,9 @@ static inline void pci_set_drvdata(struct pci_dev *pdev, void *data)
 /* If you want to know what to call your pci_dev, ask this function.
 * Again, it's a wrapper around the generic device.
 */
-static inline char *pci_name(struct pci_dev *pdev)
+static inline const char *pci_name(struct pci_dev *pdev)
 {
-	return pdev->dev.bus_id;
+	return dev_name(&pdev->dev);
 }


@@ -1014,7 +1042,9 @@ enum pci_fixup_pass {
 	pci_fixup_header,	/* After reading configuration header */
 	pci_fixup_final,	/* Final phase of device fixups */
 	pci_fixup_enable,	/* pci_enable_device() time */
-	pci_fixup_resume,	/* pci_enable_device() time */
+	pci_fixup_resume,	/* pci_device_resume() */
+	pci_fixup_suspend,	/* pci_device_suspend */
+	pci_fixup_resume_early, /* pci_device_resume_early() */
 };

 /* Anonymous variables would be nice... */
@@ -1036,6 +1066,12 @@ enum pci_fixup_pass {
 #define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook)			\
 	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume,			\
 			resume##vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook)		\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early,		\
+			resume_early##vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend,			\
+			suspend##vendor##device##hook, vendor, device, hook)


 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
@@ -1060,7 +1096,10 @@ extern int pci_pci_problems;
 extern unsigned long pci_cardbus_io_size;
 extern unsigned long pci_cardbus_mem_size;

-extern int pcibios_add_platform_entries(struct pci_dev *dev);
+int pcibios_add_platform_entries(struct pci_dev *dev);
+void pcibios_disable_device(struct pci_dev *dev);
+int pcibios_set_pcie_reset_state(struct pci_dev *dev,
+				 enum pcie_reset_state state);

 #ifdef CONFIG_PCI_MMCONFIG
 extern void __init pci_mmcfg_early_init(void);
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -95,9 +95,6 @@ struct hotplug_slot_attribute {
 * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
 *	If this field is NULL, the value passed in the struct hotplug_slot_info
 *	will be used when this value is requested by a user.
- * @get_address: Called to get pci address of a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
 * @get_max_bus_speed: Called to get the max bus speed for a slot.
 *	If this field is NULL, the value passed in the struct hotplug_slot_info
 *	will be used when this value is requested by a user.
@@ -120,7 +117,6 @@ struct hotplug_slot_ops {
 	int (*get_attention_status)	(struct hotplug_slot *slot, u8 *value);
 	int (*get_latch_status)		(struct hotplug_slot *slot, u8 *value);
 	int (*get_adapter_status)	(struct hotplug_slot *slot, u8 *value);
-	int (*get_address)		(struct hotplug_slot *slot, u32 *value);
 	int (*get_max_bus_speed)	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 	int (*get_cur_bus_speed)	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 };
@@ -140,7 +136,6 @@ struct hotplug_slot_info {
 	u8	attention_status;
 	u8	latch_status;
 	u8	adapter_status;
-	u32	address;
 	enum pci_bus_speed	max_bus_speed;
 	enum pci_bus_speed	cur_bus_speed;
 };
@@ -166,15 +161,14 @@ struct hotplug_slot {

 	/* Variables below this are for use only by the hotplug pci core. */
 	struct list_head		slot_list;
-	struct kobject			kobj;
+	struct pci_slot			*pci_slot;
 };
 #define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)

-extern int pci_hp_register		(struct hotplug_slot *slot);
-extern int pci_hp_deregister		(struct hotplug_slot *slot);
+extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr);
+extern int pci_hp_deregister(struct hotplug_slot *slot);
 extern int __must_check pci_hp_change_slot_info	(struct hotplug_slot *slot,
 						 struct hotplug_slot_info *info);
-extern struct kset *pci_hotplug_slots_kset;

 /* PCI Setting Record (Type 0) */
 struct hpp_type0 {
@@ -227,9 +221,9 @@ struct hotplug_params {
 #include <acpi/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/actypes.h>
-extern acpi_status acpi_run_oshp(acpi_handle handle);
 extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
 				struct hotplug_params *hpp);
+int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
 int acpi_root_bridge(acpi_handle handle);
 #endif
 #endif
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2171,6 +2171,8 @@
 #define PCI_DEVICE_ID_MPC8544		0x0033
 #define PCI_DEVICE_ID_MPC8572E		0x0040
 #define PCI_DEVICE_ID_MPC8572		0x0041
+#define PCI_DEVICE_ID_MPC8536E		0x0050
+#define PCI_DEVICE_ID_MPC8536		0x0051
 #define PCI_DEVICE_ID_MPC8641		0x7010
 #define PCI_DEVICE_ID_MPC8641D		0x7011
 #define PCI_DEVICE_ID_MPC8610		0x7018
@@ -2188,6 +2190,7 @@
 #define PCI_DEVICE_ID_JMICRON_JMB366	0x2366
 #define PCI_DEVICE_ID_JMICRON_JMB368	0x2368
 #define PCI_DEVICE_ID_JMICRON_JMB38X_SD	0x2381
+#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
 #define PCI_DEVICE_ID_JMICRON_JMB38X_MS	0x2383

 #define PCI_VENDOR_ID_KORENIX		0x1982
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -231,6 +231,7 @@
 #define  PCI_PM_CAP_PME_D2	0x2000	/* PME# from D2 */
 #define  PCI_PM_CAP_PME_D3	0x4000	/* PME# from D3 (hot) */
 #define  PCI_PM_CAP_PME_D3cold	0x8000	/* PME# from D3 (cold) */
+#define  PCI_PM_CAP_PME_SHIFT	11	/* Start of the PME Mask in PMC */
 #define PCI_PM_CTRL		4	/* PM control and status register */
 #define  PCI_PM_CTRL_STATE_MASK	0x0003	/* Current power state (D0 to D3) */
 #define  PCI_PM_CTRL_NO_SOFT_RESET	0x0004	/* No reset for D3hot->D0 */
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -53,6 +53,7 @@ struct platform_driver {
 	int (*suspend_late)(struct platform_device *, pm_message_t state);
 	int (*resume_early)(struct platform_device *);
 	int (*resume)(struct platform_device *);
+	struct pm_ext_ops *pm;
 	struct device_driver driver;
 };

--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -112,7 +112,9 @@ typedef struct pm_message {
 	int event;
 } pm_message_t;

-/*
+/**
+ * struct pm_ops - device PM callbacks
+ *
 * Several driver power state transitions are externally visible, affecting
 * the state of pending I/O queues and (for drivers that touch hardware)
 * interrupts, wakeups, DMA, and other hardware state.  There may also be
@@ -120,6 +122,284 @@ typedef struct pm_message {
 * to the rest of the driver stack (such as a driver that's ON gating off
 * clocks which are not in active use).
 *
+ * The externally visible transitions are handled with the help of the following
+ * callbacks included in this structure:
+ *
+ * @prepare: Prepare the device for the upcoming transition, but do NOT change
+ *	its hardware state.  Prevent new children of the device from being
+ *	registered after @prepare() returns (the driver's subsystem and
+ *	generally the rest of the kernel is supposed to prevent new calls to the
+ *	probe method from being made too once @prepare() has succeeded).  If
+ *	@prepare() detects a situation it cannot handle (e.g. registration of a
+ *	child already in progress), it may return -EAGAIN, so that the PM core
+ *	can execute it once again (e.g. after the new child has been registered)
+ *	to recover from the race condition.  This method is executed for all
+ *	kinds of suspend transitions and is followed by one of the suspend
+ *	callbacks: @suspend(), @freeze(), or @poweroff().
+ *	The PM core executes @prepare() for all devices before starting to
+ *	execute suspend callbacks for any of them, so drivers may assume all of
+ *	the other devices to be present and functional while @prepare() is being
+ *	executed.  In particular, it is safe to make GFP_KERNEL memory
+ *	allocations from within @prepare().  However, drivers may NOT assume
+ *	anything about the availability of the user space at that time and it
+ *	is not correct to request firmware from within @prepare() (it's too
+ *	late to do that).  [To work around this limitation, drivers may
+ *	register suspend and hibernation notifiers that are executed before the
+ *	freezing of tasks.]
+ *
+ * @complete: Undo the changes made by @prepare().  This method is executed for
+ *	all kinds of resume transitions, following one of the resume callbacks:
+ *	@resume(), @thaw(), @restore().  Also called if the state transition
+ *	fails before the driver's suspend callback (@suspend(), @freeze(),
+ *	@poweroff()) can be executed (e.g. if the suspend callback fails for one
+ *	of the other devices that the PM core has unsuccessfully attempted to
+ *	suspend earlier).
+ *	The PM core executes @complete() after it has executed the appropriate
+ *	resume callback for all devices.
+ *
+ * @suspend: Executed before putting the system into a sleep state in which the
+ *	contents of main memory are preserved.  Quiesce the device, put it into
+ *	a low power state appropriate for the upcoming system state (such as
+ *	PCI_D3hot), and enable wakeup events as appropriate.
+ *
+ * @resume: Executed after waking the system up from a sleep state in which the
+ *	contents of main memory were preserved.  Put the device into the
+ *	appropriate state, according to the information saved in memory by the
+ *	preceding @suspend().  The driver starts working again, responding to
+ *	hardware events and software requests.  The hardware may have gone
+ *	through a power-off reset, or it may have maintained state from the
+ *	previous suspend() which the driver may rely on while resuming.  On most
+ *	platforms, there are no restrictions on availability of resources like
+ *	clocks during @resume().
+ *
+ * @freeze: Hibernation-specific, executed before creating a hibernation image.
+ *	Quiesce operations so that a consistent image can be created, but do NOT
+ *	otherwise put the device into a low power device state and do NOT emit
+ *	system wakeup events.  Save in main memory the device settings to be
+ *	used by @restore() during the subsequent resume from hibernation or by
+ *	the subsequent @thaw(), if the creation of the image or the restoration
+ *	of main memory contents from it fails.
+ *
+ * @thaw: Hibernation-specific, executed after creating a hibernation image OR
+ *	if the creation of the image fails.  Also executed after a failing
+ *	attempt to restore the contents of main memory from such an image.
+ *	Undo the changes made by the preceding @freeze(), so the device can be
+ *	operated in the same way as immediately before the call to @freeze().
+ *
+ * @poweroff: Hibernation-specific, executed after saving a hibernation image.
+ *	Quiesce the device, put it into a low power state appropriate for the
+ *	upcoming system state (such as PCI_D3hot), and enable wakeup events as
+ *	appropriate.
+ *
+ * @restore: Hibernation-specific, executed after restoring the contents of main
+ *	memory from a hibernation image.  Driver starts working again,
+ *	responding to hardware events and software requests.  Drivers may NOT
+ *	make ANY assumptions about the hardware state right prior to @restore().
+ *	On most platforms, there are no restrictions on availability of
+ *	resources like clocks during @restore().
+ *
+ * All of the above callbacks, except for @complete(), return error codes.
+ * However, the error codes returned by the resume operations, @resume(),
+ * @thaw(), and @restore(), do not cause the PM core to abort the resume
+ * transition during which they are returned.  The error codes returned in
+ * that cases are only printed by the PM core to the system logs for debugging
+ * purposes.  Still, it is recommended that drivers only return error codes
+ * from their resume methods in case of an unrecoverable failure (i.e. when the
+ * device being handled refuses to resume and becomes unusable) to allow us to
+ * modify the PM core in the future, so that it can avoid attempting to handle
+ * devices that failed to resume and their children.
+ *
+ * It is allowed to unregister devices while the above callbacks are being
+ * executed.  However, it is not allowed to unregister a device from within any
+ * of its own callbacks.
+ */
+
+struct pm_ops {
+	int (*prepare)(struct device *dev);
+	void (*complete)(struct device *dev);
+	int (*suspend)(struct device *dev);
+	int (*resume)(struct device *dev);
+	int (*freeze)(struct device *dev);
+	int (*thaw)(struct device *dev);
+	int (*poweroff)(struct device *dev);
+	int (*restore)(struct device *dev);
+};
+
+/**
+ * struct pm_ext_ops - extended device PM callbacks
+ *
+ * Some devices require certain operations related to suspend and hibernation
+ * to be carried out with interrupts disabled.  Thus, 'struct pm_ext_ops' below
+ * is defined, adding callbacks to be executed with interrupts disabled to
+ * 'struct pm_ops'.
+ *
+ * The following callbacks included in 'struct pm_ext_ops' are executed with
+ * the nonboot CPUs switched off and with interrupts disabled on the only
+ * functional CPU.  They also are executed with the PM core list of devices
+ * locked, so they must NOT unregister any devices.
+ *
+ * @suspend_noirq: Complete the operations of ->suspend() by carrying out any
+ *	actions required for suspending the device that need interrupts to be
+ *	disabled
+ *
+ * @resume_noirq: Prepare for the execution of ->resume() by carrying out any
+ *	actions required for resuming the device that need interrupts to be
+ *	disabled
+ *
+ * @freeze_noirq: Complete the operations of ->freeze() by carrying out any
+ *	actions required for freezing the device that need interrupts to be
+ *	disabled
+ *
+ * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any
+ *	actions required for thawing the device that need interrupts to be
+ *	disabled
+ *
+ * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any
+ *	actions required for handling the device that need interrupts to be
+ *	disabled
+ *
+ * @restore_noirq: Prepare for the execution of ->restore() by carrying out any
+ *	actions required for restoring the operations of the device that need
+ *	interrupts to be disabled
+ *
+ * All of the above callbacks return error codes, but the error codes returned
+ * by the resume operations, @resume_noirq(), @thaw_noirq(), and
+ * @restore_noirq(), do not cause the PM core to abort the resume transition
+ * during which they are returned.  The error codes returned in that cases are
+ * only printed by the PM core to the system logs for debugging purposes.
+ * Still, as stated above, it is recommended that drivers only return error
+ * codes from their resume methods if the device being handled fails to resume
+ * and is not usable any more.
+ */
+
+struct pm_ext_ops {
+	struct pm_ops base;
+	int (*suspend_noirq)(struct device *dev);
+	int (*resume_noirq)(struct device *dev);
+	int (*freeze_noirq)(struct device *dev);
+	int (*thaw_noirq)(struct device *dev);
+	int (*poweroff_noirq)(struct device *dev);
+	int (*restore_noirq)(struct device *dev);
+};
+
+/**
+ * PM_EVENT_ messages
+ *
+ * The following PM_EVENT_ messages are defined for the internal use of the PM
+ * core, in order to provide a mechanism allowing the high level suspend and
+ * hibernation code to convey the necessary information to the device PM core
+ * code:
+ *
+ * ON		No transition.
+ *
+ * FREEZE 	System is going to hibernate, call ->prepare() and ->freeze()
+ *		for all devices.
+ *
+ * SUSPEND	System is going to suspend, call ->prepare() and ->suspend()
+ *		for all devices.
+ *
+ * HIBERNATE	Hibernation image has been saved, call ->prepare() and
+ *		->poweroff() for all devices.
+ *
+ * QUIESCE	Contents of main memory are going to be restored from a (loaded)
+ *		hibernation image, call ->prepare() and ->freeze() for all
+ *		devices.
+ *
+ * RESUME	System is resuming, call ->resume() and ->complete() for all
+ *		devices.
+ *
+ * THAW		Hibernation image has been created, call ->thaw() and
+ *		->complete() for all devices.
+ *
+ * RESTORE	Contents of main memory have been restored from a hibernation
+ *		image, call ->restore() and ->complete() for all devices.
+ *
+ * RECOVER	Creation of a hibernation image or restoration of the main
+ *		memory contents from a hibernation image has failed, call
+ *		->thaw() and ->complete() for all devices.
+ */
+
+#define PM_EVENT_ON		0x0000
+#define PM_EVENT_FREEZE 	0x0001
+#define PM_EVENT_SUSPEND	0x0002
+#define PM_EVENT_HIBERNATE	0x0004
+#define PM_EVENT_QUIESCE	0x0008
+#define PM_EVENT_RESUME		0x0010
+#define PM_EVENT_THAW		0x0020
+#define PM_EVENT_RESTORE	0x0040
+#define PM_EVENT_RECOVER	0x0080
+
+#define PM_EVENT_SLEEP	(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+
+#define PMSG_FREEZE	((struct pm_message){ .event = PM_EVENT_FREEZE, })
+#define PMSG_QUIESCE	((struct pm_message){ .event = PM_EVENT_QUIESCE, })
+#define PMSG_SUSPEND	((struct pm_message){ .event = PM_EVENT_SUSPEND, })
+#define PMSG_HIBERNATE	((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
+#define PMSG_RESUME	((struct pm_message){ .event = PM_EVENT_RESUME, })
+#define PMSG_THAW	((struct pm_message){ .event = PM_EVENT_THAW, })
+#define PMSG_RESTORE	((struct pm_message){ .event = PM_EVENT_RESTORE, })
+#define PMSG_RECOVER	((struct pm_message){ .event = PM_EVENT_RECOVER, })
+#define PMSG_ON		((struct pm_message){ .event = PM_EVENT_ON, })
+
+/**
+ * Device power management states
+ *
+ * These state labels are used internally by the PM core to indicate the current
+ * status of a device with respect to the PM core operations.
+ *
+ * DPM_ON		Device is regarded as operational.  Set this way
+ *			initially and when ->complete() is about to be called.
+ *			Also set when ->prepare() fails.
+ *
+ * DPM_PREPARING	Device is going to be prepared for a PM transition.  Set
+ *			when ->prepare() is about to be called.
+ *
+ * DPM_RESUMING		Device is going to be resumed.  Set when ->resume(),
+ *			->thaw(), or ->restore() is about to be called.
+ *
+ * DPM_SUSPENDING	Device has been prepared for a power transition.  Set
+ *			when ->prepare() has just succeeded.
+ *
+ * DPM_OFF		Device is regarded as inactive.  Set immediately after
+ *			->suspend(), ->freeze(), or ->poweroff() has succeeded.
+ *			Also set when ->resume()_noirq, ->thaw_noirq(), or
+ *			->restore_noirq() is about to be called.
+ *
+ * DPM_OFF_IRQ		Device is in a "deep sleep".  Set immediately after
+ *			->suspend_noirq(), ->freeze_noirq(), or
+ *			->poweroff_noirq() has just succeeded.
+ */
+
+enum dpm_state {
+	DPM_INVALID,
+	DPM_ON,
+	DPM_PREPARING,
+	DPM_RESUMING,
+	DPM_SUSPENDING,
+	DPM_OFF,
+	DPM_OFF_IRQ,
+};
+
+struct dev_pm_info {
+	pm_message_t		power_state;
+	unsigned		can_wakeup:1;
+	unsigned		should_wakeup:1;
+	enum dpm_state		status;		/* Owned by the PM core */
+#ifdef	CONFIG_PM_SLEEP
+	struct list_head	entry;
+#endif
+};
+
+/*
+ * The PM_EVENT_ messages are also used by drivers implementing the legacy
+ * suspend framework, based on the ->suspend() and ->resume() callbacks common
+ * for suspend and hibernation transitions, according to the rules below.
+ */
+
+/* Necessary, because several drivers use PM_EVENT_PRETHAW */
+#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
+
+/*
 * One transition is triggered by resume(), after a suspend() call; the
 * message is implicit:
 *
@@ -164,35 +444,13 @@ typedef struct pm_message {
 * or from system low-power states such as standby or suspend-to-RAM.
 */

-#define PM_EVENT_ON 0
-#define PM_EVENT_FREEZE 1
-#define PM_EVENT_SUSPEND 2
-#define PM_EVENT_HIBERNATE 4
-#define PM_EVENT_PRETHAW 8
-
-#define PM_EVENT_SLEEP	(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
-
-#define PMSG_FREEZE	((struct pm_message){ .event = PM_EVENT_FREEZE, })
-#define PMSG_PRETHAW	((struct pm_message){ .event = PM_EVENT_PRETHAW, })
-#define PMSG_SUSPEND	((struct pm_message){ .event = PM_EVENT_SUSPEND, })
-#define PMSG_HIBERNATE	((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
-#define PMSG_ON		((struct pm_message){ .event = PM_EVENT_ON, })
-
-struct dev_pm_info {
-	pm_message_t		power_state;
-	unsigned		can_wakeup:1;
-	unsigned		should_wakeup:1;
-	bool			sleeping:1;	/* Owned by the PM core */
-#ifdef	CONFIG_PM_SLEEP
-	struct list_head	entry;
-#endif
-};
-
-extern int device_power_down(pm_message_t state);
-extern void device_power_up(void);
-extern void device_resume(void);
-
 #ifdef CONFIG_PM_SLEEP
+extern void device_pm_lock(void);
+extern void device_power_up(pm_message_t state);
+extern void device_resume(pm_message_t state);
+
+extern void device_pm_unlock(void);
+extern int device_power_down(pm_message_t state);
 extern int device_suspend(pm_message_t state);
 extern int device_prepare_suspend(pm_message_t state);

--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -35,6 +35,11 @@ static inline void device_init_wakeup(struct device *dev, int val)
 	dev->power.can_wakeup = dev->power.should_wakeup = !!val;
 }

+static inline void device_set_wakeup_capable(struct device *dev, int val)
+{
+	dev->power.can_wakeup = !!val;
+}
+
 static inline int device_can_wakeup(struct device *dev)
 {
 	return dev->power.can_wakeup;
@@ -47,21 +52,7 @@ static inline void device_set_wakeup_enable(struct device *dev, int val)

 static inline int device_may_wakeup(struct device *dev)
 {
-	return dev->power.can_wakeup & dev->power.should_wakeup;
-}
-
-/*
- * Platform hook to activate device wakeup capability, if that's not already
- * handled by enable_irq_wake() etc.
- * Returns zero on success, else negative errno
- */
-extern int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
-	if (platform_enable_wakeup)
-		return (*platform_enable_wakeup)(dev, is_on);
-	return 0;
+	return dev->power.can_wakeup && dev->power.should_wakeup;
 }

 #else /* !CONFIG_PM */
@@ -72,6 +63,8 @@ static inline void device_init_wakeup(struct device *dev, int val)
 	dev->power.can_wakeup = !!val;
 }

+static inline void device_set_wakeup_capable(struct device *dev, int val) { }
+
 static inline int device_can_wakeup(struct device *dev)
 {
 	return dev->power.can_wakeup;
@@ -80,11 +73,6 @@ static inline int device_can_wakeup(struct device *dev)
 #define device_set_wakeup_enable(dev, val)	do {} while (0)
 #define device_may_wakeup(dev)			0

-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
-	return 0;
-}
-
 #endif /* !CONFIG_PM */

 #endif /* _LINUX_PM_WAKEUP_H */
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -1,6 +1,8 @@
 /*
 * Linux Plug and Play Support
 * Copyright by Adam Belay <ambx1@neo.rr.com>
+ * Copyright (C) 2008 Hewlett-Packard Development Company, L.P.
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
 */

 #ifndef _LINUX_PNP_H
@@ -15,7 +17,6 @@

 struct pnp_protocol;
 struct pnp_dev;
-struct pnp_resource_table;

 /*
 * Resource Management
@@ -24,7 +25,14 @@ struct resource *pnp_get_resource(struct pnp_dev *, unsigned int, unsigned int);

 static inline int pnp_resource_valid(struct resource *res)
 {
-	if (res && !(res->flags & IORESOURCE_UNSET))
+	if (res)
+		return 1;
+	return 0;
+}
+
+static inline int pnp_resource_enabled(struct resource *res)
+{
+	if (res && !(res->flags & IORESOURCE_DISABLED))
 		return 1;
 	return 0;
 }
@@ -40,19 +48,31 @@ static inline resource_size_t pnp_resource_len(struct resource *res)
 static inline resource_size_t pnp_port_start(struct pnp_dev *dev,
 					     unsigned int bar)
 {
-	return pnp_get_resource(dev, IORESOURCE_IO, bar)->start;
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+	if (pnp_resource_valid(res))
+		return res->start;
+	return 0;
 }

 static inline resource_size_t pnp_port_end(struct pnp_dev *dev,
 					   unsigned int bar)
 {
-	return pnp_get_resource(dev, IORESOURCE_IO, bar)->end;
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+	if (pnp_resource_valid(res))
+		return res->end;
+	return 0;
 }

 static inline unsigned long pnp_port_flags(struct pnp_dev *dev,
 					   unsigned int bar)
 {
-	return pnp_get_resource(dev, IORESOURCE_IO, bar)->flags;
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+	if (pnp_resource_valid(res))
+		return res->flags;
+	return IORESOURCE_IO | IORESOURCE_AUTO;
 }

 static inline int pnp_port_valid(struct pnp_dev *dev, unsigned int bar)
@@ -63,25 +83,41 @@ static inline int pnp_port_valid(struct pnp_dev *dev, unsigned int bar)
 static inline resource_size_t pnp_port_len(struct pnp_dev *dev,
 					   unsigned int bar)
 {
-	return pnp_resource_len(pnp_get_resource(dev, IORESOURCE_IO, bar));
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+	if (pnp_resource_valid(res))
+		return pnp_resource_len(res);
+	return 0;
 }


 static inline resource_size_t pnp_mem_start(struct pnp_dev *dev,
 					    unsigned int bar)
 {
-	return pnp_get_resource(dev, IORESOURCE_MEM, bar)->start;
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+	if (pnp_resource_valid(res))
+		return res->start;
+	return 0;
 }

 static inline resource_size_t pnp_mem_end(struct pnp_dev *dev,
 					  unsigned int bar)
 {
-	return pnp_get_resource(dev, IORESOURCE_MEM, bar)->end;
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+	if (pnp_resource_valid(res))
+		return res->end;
+	return 0;
 }

 static inline unsigned long pnp_mem_flags(struct pnp_dev *dev, unsigned int bar)
 {
-	return pnp_get_resource(dev, IORESOURCE_MEM, bar)->flags;
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+	if (pnp_resource_valid(res))
+		return res->flags;
+	return IORESOURCE_MEM | IORESOURCE_AUTO;
 }

 static inline int pnp_mem_valid(struct pnp_dev *dev, unsigned int bar)
@@ -92,18 +128,30 @@ static inline int pnp_mem_valid(struct pnp_dev *dev, unsigned int bar)
 static inline resource_size_t pnp_mem_len(struct pnp_dev *dev,
 					  unsigned int bar)
 {
-	return pnp_resource_len(pnp_get_resource(dev, IORESOURCE_MEM, bar));
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+	if (pnp_resource_valid(res))
+		return pnp_resource_len(res);
+	return 0;
 }


 static inline resource_size_t pnp_irq(struct pnp_dev *dev, unsigned int bar)
 {
-	return pnp_get_resource(dev, IORESOURCE_IRQ, bar)->start;
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IRQ, bar);
+
+	if (pnp_resource_valid(res))
+		return res->start;
+	return -1;
 }

 static inline unsigned long pnp_irq_flags(struct pnp_dev *dev, unsigned int bar)
 {
-	return pnp_get_resource(dev, IORESOURCE_IRQ, bar)->flags;
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IRQ, bar);
+
+	if (pnp_resource_valid(res))
+		return res->flags;
+	return IORESOURCE_IRQ | IORESOURCE_AUTO;
 }

 static inline int pnp_irq_valid(struct pnp_dev *dev, unsigned int bar)
@@ -114,12 +162,20 @@ static inline int pnp_irq_valid(struct pnp_dev *dev, unsigned int bar)

 static inline resource_size_t pnp_dma(struct pnp_dev *dev, unsigned int bar)
 {
-	return pnp_get_resource(dev, IORESOURCE_DMA, bar)->start;
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_DMA, bar);
+
+	if (pnp_resource_valid(res))
+		return res->start;
+	return -1;
 }

 static inline unsigned long pnp_dma_flags(struct pnp_dev *dev, unsigned int bar)
 {
-	return pnp_get_resource(dev, IORESOURCE_DMA, bar)->flags;
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_DMA, bar);
+
+	if (pnp_resource_valid(res))
+		return res->flags;
+	return IORESOURCE_DMA | IORESOURCE_AUTO;
 }

 static inline int pnp_dma_valid(struct pnp_dev *dev, unsigned int bar)
@@ -128,57 +184,6 @@ static inline int pnp_dma_valid(struct pnp_dev *dev, unsigned int bar)
 }


-#define PNP_PORT_FLAG_16BITADDR	(1<<0)
-#define PNP_PORT_FLAG_FIXED	(1<<1)
-
-struct pnp_port {
-	unsigned short min;	/* min base number */
-	unsigned short max;	/* max base number */
-	unsigned char align;	/* align boundary */
-	unsigned char size;	/* size of range */
-	unsigned char flags;	/* port flags */
-	unsigned char pad;	/* pad */
-	struct pnp_port *next;	/* next port */
-};
-
-#define PNP_IRQ_NR 256
-struct pnp_irq {
-	DECLARE_BITMAP(map, PNP_IRQ_NR);	/* bitmask for IRQ lines */
-	unsigned char flags;	/* IRQ flags */
-	unsigned char pad;	/* pad */
-	struct pnp_irq *next;	/* next IRQ */
-};
-
-struct pnp_dma {
-	unsigned char map;	/* bitmask for DMA channels */
-	unsigned char flags;	/* DMA flags */
-	struct pnp_dma *next;	/* next port */
-};
-
-struct pnp_mem {
-	unsigned int min;	/* min base number */
-	unsigned int max;	/* max base number */
-	unsigned int align;	/* align boundary */
-	unsigned int size;	/* size of range */
-	unsigned char flags;	/* memory flags */
-	unsigned char pad;	/* pad */
-	struct pnp_mem *next;	/* next memory resource */
-};
-
-#define PNP_RES_PRIORITY_PREFERRED	0
-#define PNP_RES_PRIORITY_ACCEPTABLE	1
-#define PNP_RES_PRIORITY_FUNCTIONAL	2
-#define PNP_RES_PRIORITY_INVALID	65535
-
-struct pnp_option {
-	unsigned short priority;	/* priority */
-	struct pnp_port *port;		/* first port */
-	struct pnp_irq *irq;		/* first IRQ */
-	struct pnp_dma *dma;		/* first DMA */
-	struct pnp_mem *mem;		/* first memory resource */
-	struct pnp_option *next;	/* used to chain dependent resources */
-};
-
 /*
 * Device Management
 */
@@ -246,9 +251,9 @@ struct pnp_dev {

 	int active;
 	int capabilities;
-	struct pnp_option *independent;
-	struct pnp_option *dependent;
-	struct pnp_resource_table *res;
+	unsigned int num_dependent_sets;
+	struct list_head resources;
+	struct list_head options;

 	char name[PNP_NAME_LEN];	/* contains a human-readable name */
 	int flags;			/* used by protocols */
@@ -425,6 +430,8 @@ void pnp_unregister_card_driver(struct pnp_card_driver *drv);
 extern struct list_head pnp_cards;

 /* resource management */
+int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t base,
+			resource_size_t size);
 int pnp_auto_config_dev(struct pnp_dev *dev);
 int pnp_start_dev(struct pnp_dev *dev);
 int pnp_stop_dev(struct pnp_dev *dev);
@@ -452,6 +459,9 @@ static inline int pnp_register_card_driver(struct pnp_card_driver *drv) { return
 static inline void pnp_unregister_card_driver(struct pnp_card_driver *drv) { }

 /* resource management */
+static inline int pnp_possible_config(struct pnp_dev *dev, int type,
+				      resource_size_t base,
+				      resource_size_t size) { return 0; }
 static inline int pnp_auto_config_dev(struct pnp_dev *dev) { return -ENODEV; }
 static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; }
 static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; }
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1062,12 +1062,6 @@ struct task_struct {
 #endif

 	struct list_head tasks;
-	/*
-	 * ptrace_list/ptrace_children forms the list of my children
-	 * that were stolen by a ptracer.
-	 */
-	struct list_head ptrace_children;
-	struct list_head ptrace_list;

 	struct mm_struct *mm, *active_mm;

@@ -1089,18 +1083,25 @@ struct task_struct {
 	/* 
 	 * pointers to (original) parent process, youngest child, younger sibling,
 	 * older sibling, respectively.  (p->father can be replaced with 
-	 * p->parent->pid)
+	 * p->real_parent->pid)
 	 */
-	struct task_struct *real_parent; /* real parent process (when being debugged) */
-	struct task_struct *parent;	/* parent process */
+	struct task_struct *real_parent; /* real parent process */
+	struct task_struct *parent; /* recipient of SIGCHLD, wait4() reports */
 	/*
-	 * children/sibling forms the list of my children plus the
-	 * tasks I'm ptracing.
+	 * children/sibling forms the list of my natural children
 	 */
 	struct list_head children;	/* list of my children */
 	struct list_head sibling;	/* linkage in my parent's children list */
 	struct task_struct *group_leader;	/* threadgroup leader */

+	/*
+	 * ptraced is the list of tasks this task is using ptrace on.
+	 * This includes both natural children and PTRACE_ATTACH targets.
+	 * p->ptrace_entry is p's link on the p->parent->ptraced list.
+	 */
+	struct list_head ptraced;
+	struct list_head ptrace_entry;
+
 	/* PID/PID hash table linkage. */
 	struct pid_link pids[PIDTYPE_MAX];
 	struct list_head thread_group;
@@ -1494,6 +1495,7 @@ static inline void put_task_struct(struct task_struct *t)
 #define PF_MEMPOLICY	0x10000000	/* Non-default NUMA mempolicy */
 #define PF_MUTEX_TESTER	0x20000000	/* Thread belongs to the rt mutex tester */
 #define PF_FREEZER_SKIP	0x40000000	/* Freezer should not count it as freezeable */
+#define PF_FREEZER_NOSIG 0x80000000	/* Freezer won't send signals to it */

 /*
 * Only the _current_ task can read/write to tsk->flags, but other
@@ -1875,9 +1877,6 @@ extern void wait_task_inactive(struct task_struct * p);
 #define wait_task_inactive(p)	do { } while (0)
 #endif

-#define remove_parent(p)	list_del_init(&(p)->sibling)
-#define add_parent(p)		list_add_tail(&(p)->sibling,&(p)->parent->children)
-
 #define next_task(p)	list_entry(rcu_dereference((p)->tasks.next), struct task_struct, tasks)

 #define for_each_process(p) \
--- a/include/linux/spi/mmc_spi.h
+++ b/include/linux/spi/mmc_spi.h
@@ -23,6 +23,15 @@ struct mmc_spi_platform_data {
 	/* sense switch on sd cards */
 	int (*get_ro)(struct device *);

+	/*
+	 * If board does not use CD interrupts, driver can optimize polling
+	 * using this function.
+	 */
+	int (*get_cd)(struct device *);
+
+	/* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */
+	unsigned long caps;
+
 	/* how long to debounce card detect, in msecs */
 	u16 detect_delay;

--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -42,7 +42,8 @@ struct rpc_clnt {

 	unsigned int		cl_softrtry : 1,/* soft timeouts */
 				cl_discrtry : 1,/* disconnect before retry */
-				cl_autobind : 1;/* use getport() */
+				cl_autobind : 1,/* use getport() */
+				cl_chatty   : 1;/* be verbose */

 	struct rpc_rtt *	cl_rtt;		/* RTO estimator data */
 	const struct rpc_timeout *cl_timeout;	/* Timeout strategy */
@@ -114,6 +115,7 @@ struct rpc_create_args {
 #define RPC_CLNT_CREATE_NONPRIVPORT	(1UL << 3)
 #define RPC_CLNT_CREATE_NOPING		(1UL << 4)
 #define RPC_CLNT_CREATE_DISCRTRY	(1UL << 5)
+#define RPC_CLNT_CREATE_QUIET		(1UL << 6)

 struct rpc_clnt *rpc_create(struct rpc_create_args *args);
 struct rpc_clnt	*rpc_bind_new_program(struct rpc_clnt *,
@@ -123,6 +125,9 @@ void		rpc_shutdown_client(struct rpc_clnt *);
 void		rpc_release_client(struct rpc_clnt *);

 int		rpcb_register(u32, u32, int, unsigned short, int *);
+int		rpcb_v4_register(const u32 program, const u32 version,
+				 const struct sockaddr *address,
+				 const char *netid, int *result);
 int		rpcb_getport_sync(struct sockaddr_in *, u32, u32, int);
 void		rpcb_getport_async(struct rpc_task *);

--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -135,7 +135,6 @@ struct rpc_task_setup {
 #define RPC_IS_SWAPPER(t)	((t)->tk_flags & RPC_TASK_SWAPPER)
 #define RPC_DO_ROOTOVERRIDE(t)	((t)->tk_flags & RPC_TASK_ROOTCREDS)
 #define RPC_ASSASSINATED(t)	((t)->tk_flags & RPC_TASK_KILLED)
-#define RPC_DO_CALLBACK(t)	((t)->tk_callback != NULL)
 #define RPC_IS_SOFT(t)		((t)->tk_flags & RPC_TASK_SOFT)

 #define RPC_TASK_RUNNING	0
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -86,6 +86,11 @@ typedef int __bitwise suspend_state_t;
 *	that implement @begin(), but platforms implementing @begin() should
 *	also provide a @end() which cleans up transitions aborted before
 *	@enter().
+ *
+ * @recover: Recover the platform from a suspend failure.
+ *	Called by the PM core if the suspending of devices fails.
+ *	This callback is optional and should only be implemented by platforms
+ *	which require special recovery actions in that situation.
 */
 struct platform_suspend_ops {
 	int (*valid)(suspend_state_t state);
@@ -94,6 +99,7 @@ struct platform_suspend_ops {
 	int (*enter)(suspend_state_t state);
 	void (*finish)(void);
 	void (*end)(void);
+	void (*recover)(void);
 };

 #ifdef CONFIG_SUSPEND
@@ -149,7 +155,7 @@ extern void mark_free_pages(struct zone *zone);
 * The methods in this structure allow a platform to carry out special
 * operations required by it during a hibernation transition.
 *
- * All the methods below must be implemented.
+ * All the methods below, except for @recover(), must be implemented.
 *
 * @begin: Tell the platform driver that we're starting hibernation.
 *	Called right after shrinking memory and before freezing devices.
@@ -189,6 +195,11 @@ extern void mark_free_pages(struct zone *zone);
 * @restore_cleanup: Clean up after a failing image restoration.
 *	Called right after the nonboot CPUs have been enabled and before
 *	thawing devices (runs with IRQs on).
+ *
+ * @recover: Recover the platform from a failure to suspend devices.
+ *	Called by the PM core if the suspending of devices during hibernation
+ *	fails.  This callback is optional and should only be implemented by
+ *	platforms which require special recovery actions in that situation.
 */
 struct platform_hibernation_ops {
 	int (*begin)(void);
@@ -200,6 +211,7 @@ struct platform_hibernation_ops {
 	void (*leave)(void);
 	int (*pre_restore)(void);
 	void (*restore_cleanup)(void);
+	void (*recover)(void);
 };

 #ifdef CONFIG_HIBERNATION