Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - tweaks to Elan drivers (both PS/2 and I2C) to support new devices.
   Also revert of one of IDs as that device should really be driven by
   i2c-hid + hid-multitouch

 - a few drivers have been switched to set_brightness_blocking() call
   because they either were sleeping the their set_brightness()
   implementation or used workqueue but were not canceling it on unbind.

 - ps2-gpio and matrix_keypad needed to [properly] flush their works to
   avoid potential use-after-free on unbind.

 - other miscellaneous fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK
  Input: st-keyscan - fix potential zalloc NULL dereference
  Input: apanel - switch to using brightness_set_blocking()
  Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G"
  Input: qt2160 - switch to using brightness_set_blocking()
  Input: matrix_keypad - use flush_delayed_work()
  Input: ps2-gpio - flush TX work when closing port
  Input: cap11xx - switch to using set_brightness_blocking()
  Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780
  Input: bma150 - register input device after setting private data
  Input: pwm-vibra - stop regulator after disabling pwm, not before
  Input: pwm-vibra - prevent unbalanced regulator
  Input: snvs_pwrkey - allow selecting driver for i.MX 7D

drivers/input/misc/apanel.c

@@ -22,7 +22,6 @@
 #include <linux/io.h>
 #include <linux/input-polldev.h>
 #include <linux/i2c.h>
-#include <linux/workqueue.h>
 #include <linux/leds.h>
 
 #define APANEL_NAME	"Fujitsu Application Panel"
@@ -59,8 +58,6 @@ struct apanel {
 	struct i2c_client *client;
 	unsigned short keymap[MAX_PANEL_KEYS];
 	u16    nkeys;
-	u16    led_bits;
-	struct work_struct led_work;
 	struct led_classdev mail_led;
 };
 
@@ -109,25 +106,13 @@ static void apanel_poll(struct input_polled_dev *ipdev)
 			report_key(idev, ap->keymap[i]);
 }
 
-/* Track state changes of LED */
-static void led_update(struct work_struct *work)
-{
-	struct apanel *ap = container_of(work, struct apanel, led_work);
-
-	i2c_smbus_write_word_data(ap->client, 0x10, ap->led_bits);
-}
-
-static void mail_led_set(struct led_classdev *led,
+static int mail_led_set(struct led_classdev *led,
 			 enum led_brightness value)
 {
 	struct apanel *ap = container_of(led, struct apanel, mail_led);
+	u16 led_bits = value != LED_OFF ? 0x8000 : 0x0000;
 
-	if (value != LED_OFF)
-		ap->led_bits |= 0x8000;
-	else
-		ap->led_bits &= ~0x8000;
-
-	schedule_work(&ap->led_work);
+	return i2c_smbus_write_word_data(ap->client, 0x10, led_bits);
 }
 
 static int apanel_remove(struct i2c_client *client)
@@ -179,7 +164,7 @@ static struct apanel apanel = {
 	},
 	.mail_led = {
 		.name = "mail:blue",
-		.brightness_set = mail_led_set,
+		.brightness_set_blocking = mail_led_set,
 	},
 };
 
@@ -235,7 +220,6 @@ static int apanel_probe(struct i2c_client *client,
 	if (err)
 		goto out3;
 
-	INIT_WORK(&ap->led_work, led_update);
 	if (device_chip[APANEL_DEV_LED] != CHIP_NONE) {
 		err = led_classdev_register(&client->dev, &ap->mail_led);
 		if (err)

drivers/input/misc/bma150.c

@@ -481,13 +481,14 @@ static int bma150_register_input_device(struct bma150_data *bma150)
 	idev->close = bma150_irq_close;
 	input_set_drvdata(idev, bma150);
 
+	bma150->input = idev;
+
 	error = input_register_device(idev);
 	if (error) {
 		input_free_device(idev);
 		return error;
 	}
 
-	bma150->input = idev;
 	return 0;
 }
 
@@ -510,15 +511,15 @@ static int bma150_register_polled_device(struct bma150_data *bma150)
 
 	bma150_init_input_device(bma150, ipoll_dev->input);
 
+	bma150->input_polled = ipoll_dev;
+	bma150->input = ipoll_dev->input;
+
 	error = input_register_polled_device(ipoll_dev);
 	if (error) {
 		input_free_polled_device(ipoll_dev);
 		return error;
 	}
 
-	bma150->input_polled = ipoll_dev;
-	bma150->input = ipoll_dev->input;
-
 	return 0;
 }
 

drivers/input/misc/pwm-vibra.c

@@ -34,6 +34,7 @@ struct pwm_vibrator {
 	struct work_struct play_work;
 	u16 level;
 	u32 direction_duty_cycle;
+	bool vcc_on;
 };
 
 static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
@@ -42,10 +43,13 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 	struct pwm_state state;
 	int err;
 
-	err = regulator_enable(vibrator->vcc);
-	if (err) {
-		dev_err(pdev, "failed to enable regulator: %d", err);
-		return err;
+	if (!vibrator->vcc_on) {
+		err = regulator_enable(vibrator->vcc);
+		if (err) {
+			dev_err(pdev, "failed to enable regulator: %d", err);
+			return err;
+		}
+		vibrator->vcc_on = true;
 	}
 
 	pwm_get_state(vibrator->pwm, &state);
@@ -76,11 +80,14 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 
 static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
 {
-	regulator_disable(vibrator->vcc);
-
 	if (vibrator->pwm_dir)
 		pwm_disable(vibrator->pwm_dir);
 	pwm_disable(vibrator->pwm);
+
+	if (vibrator->vcc_on) {
+		regulator_disable(vibrator->vcc);
+		vibrator->vcc_on = false;
+	}
 }
 
 static void pwm_vibrator_play_work(struct work_struct *work)