intel-ethernet: clean up W=1 warnings in kdoc

This takes care of all of the trivial W=1 fixes in the Intel
Ethernet drivers, which allows developers and maintainers to
build more of the networking tree with more complete warning
checks.

There are three classes of kdoc warnings fixed:
 - cannot understand function prototype: 'x'
 - Excess function parameter 'x' description in 'y'
 - Function parameter or member 'x' not described in 'y'

All of the changes were trivial comment updates on
function headers.

Inspired by Lee Jones' series of wireless work to do the same.
Compile tested only, and passes simple test of
$ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \
  xargs scripts/kernel-doc -none

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/igb/e1000_82575.c

@@ -2554,7 +2554,7 @@ out:
 /**
  *  __igb_access_emi_reg - Read/write EMI register
  *  @hw: pointer to the HW structure
- *  @addr: EMI address to program
+ *  @address: EMI address to program
  *  @data: pointer to value to read/write from/to the EMI address
  *  @read: boolean flag to indicate read or write
  **/
@@ -2590,7 +2590,7 @@ s32 igb_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data)
  *  igb_set_eee_i350 - Enable/disable EEE support
  *  @hw: pointer to the HW structure
  *  @adv1G: boolean flag enabling 1G EEE advertisement
- *  @adv100m: boolean flag enabling 100M EEE advertisement
+ *  @adv100M: boolean flag enabling 100M EEE advertisement
  *
  *  Enable/disable EEE based on setting in dev_spec structure.
  *
@@ -2646,7 +2646,7 @@ out:
  *  igb_set_eee_i354 - Enable/disable EEE support
  *  @hw: pointer to the HW structure
  *  @adv1G: boolean flag enabling 1G EEE advertisement
- *  @adv100m: boolean flag enabling 100M EEE advertisement
+ *  @adv100M: boolean flag enabling 100M EEE advertisement
  *
  *  Enable/disable EEE legacy mode based on setting in dev_spec structure.
  *

drivers/net/ethernet/intel/igb/e1000_i210.c

@@ -357,13 +357,14 @@ static s32 igb_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data)
 /**
  * igb_read_invm_i210 - Read invm wrapper function for I210/I211
  *  @hw: pointer to the HW structure
- *  @words: number of words to read
+ *  @offset: offset to read from
+ *  @words: number of words to read (unused)
  *  @data: pointer to the data read
  *
  *  Wrapper function to return data formerly found in the NVM.
  **/
 static s32 igb_read_invm_i210(struct e1000_hw *hw, u16 offset,
-				u16 words __always_unused, u16 *data)
+				u16 __always_unused words, u16 *data)
 {
 	s32 ret_val = 0;
 

drivers/net/ethernet/intel/igb/e1000_mac.c

@@ -166,6 +166,7 @@ static s32 igb_find_vlvf_slot(struct e1000_hw *hw, u32 vlan, bool vlvf_bypass)
  *  @vlan: VLAN id to add or remove
  *  @vind: VMDq output index that maps queue to VLAN id
  *  @vlan_on: if true add filter, if false remove
+ *  @vlvf_bypass: skip VLVF if no match is found
  *
  *  Sets or clears a bit in the VLAN filter table array based on VLAN id
  *  and if we are adding or removing the filter

drivers/net/ethernet/intel/igb/e1000_mbx.c

@@ -9,6 +9,7 @@
  *  @msg: The message buffer
  *  @size: Length of buffer
  *  @mbx_id: id of mailbox to read
+ *  @unlock: skip locking or not
  *
  *  returns SUCCESS if it successfully read message from buffer
  **/

drivers/net/ethernet/intel/igb/igb_main.c

@@ -549,8 +549,7 @@ exit:
 
 /**
  *  igb_get_i2c_data - Reads the I2C SDA data bit
- *  @hw: pointer to hardware structure
- *  @i2cctl: Current value of I2CCTL register
+ *  @data: opaque pointer to adapter struct
  *
  *  Returns the I2C data bit value
  **/
@@ -3868,6 +3867,7 @@ static int igb_sw_init(struct igb_adapter *adapter)
 /**
  *  igb_open - Called when a network interface is made active
  *  @netdev: network interface device structure
+ *  @resuming: indicates whether we are in a resume call
  *
  *  Returns 0 on success, negative value on failure
  *
@@ -3985,6 +3985,7 @@ int igb_open(struct net_device *netdev)
 /**
  *  igb_close - Disables a network interface
  *  @netdev: network interface device structure
+ *  @suspending: indicates we are in a suspend call
  *
  *  Returns 0, this is not allowed to fail
  *
@@ -5219,7 +5220,7 @@ static void igb_check_lvmmc(struct igb_adapter *adapter)
 
 /**
  *  igb_watchdog - Timer Call-back
- *  @data: pointer to adapter cast into an unsigned long
+ *  @t: pointer to timer_list containing our private info pointer
  **/
 static void igb_watchdog(struct timer_list *t)
 {
@@ -6192,8 +6193,9 @@ static netdev_tx_t igb_xmit_frame(struct sk_buff *skb,
 /**
  *  igb_tx_timeout - Respond to a Tx Hang
  *  @netdev: network interface device structure
+ *  @txqueue: number of the Tx queue that hung (unused)
  **/
-static void igb_tx_timeout(struct net_device *netdev, unsigned int txqueue)
+static void igb_tx_timeout(struct net_device *netdev, unsigned int __always_unused txqueue)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
@@ -8181,7 +8183,6 @@ static inline void igb_rx_hash(struct igb_ring *ring,
  *  igb_is_non_eop - process handling of non-EOP buffers
  *  @rx_ring: Rx ring being processed
  *  @rx_desc: Rx descriptor for current buffer
- *  @skb: current socket buffer containing buffer in progress
  *
  *  This function updates next to clean.  If the buffer is an EOP buffer
  *  this function exits returning false, otherwise it will place the
@@ -8460,8 +8461,9 @@ static bool igb_alloc_mapped_page(struct igb_ring *rx_ring,
 }
 
 /**
- *  igb_alloc_rx_buffers - Replace used receive buffers; packet split
- *  @adapter: address of board private structure
+ *  igb_alloc_rx_buffers - Replace used receive buffers
+ *  @rx_ring: rx descriptor ring to allocate new receive buffers
+ *  @cleaned_count: count of buffers to allocate
  **/
 void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count)
 {
@@ -8530,9 +8532,9 @@ void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count)
 
 /**
  * igb_mii_ioctl -
- * @netdev:
- * @ifreq:
- * @cmd:
+ * @netdev: pointer to netdev struct
+ * @ifr: interface structure
+ * @cmd: ioctl command to execute
  **/
 static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 {
@@ -8560,9 +8562,9 @@ static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 
 /**
  * igb_ioctl -
- * @netdev:
- * @ifreq:
- * @cmd:
+ * @netdev: pointer to netdev struct
+ * @ifr: interface structure
+ * @cmd: ioctl command to execute
  **/
 static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 {

drivers/net/ethernet/intel/igb/igb_ptp.c

@@ -957,8 +957,8 @@ void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector,
 
 /**
  * igb_ptp_get_ts_config - get hardware time stamping config
- * @netdev:
- * @ifreq:
+ * @netdev: netdev struct
+ * @ifr: interface struct
  *
  * Get the hwtstamp_config settings to return to the user. Rather than attempt
  * to deconstruct the settings from the registers, just return a shadow copy
@@ -1141,8 +1141,8 @@ static int igb_ptp_set_timestamp_mode(struct igb_adapter *adapter,
 
 /**
  * igb_ptp_set_ts_config - set hardware time stamping config
- * @netdev:
- * @ifreq:
+ * @netdev: netdev struct
+ * @ifr: interface struct
  *
  **/
 int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr)