Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...

arch/arm/mach-integrator/include/mach/uncompress.h

@@ -46,5 +46,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-
-#define arch_decomp_wdog()

arch/arm/mach-integrator/integrator_ap.c

@@ -425,7 +425,7 @@ void __init ap_init_early(void)
 
 #ifdef CONFIG_OF
 
-static void __init ap_init_timer_of(void)
+static void __init ap_of_timer_init(void)
 {
 	struct device_node *node;
 	const char *path;
@@ -464,10 +464,6 @@ static void __init ap_init_timer_of(void)
 	integrator_clockevent_init(rate, base, irq);
 }
 
-static struct sys_timer ap_of_timer = {
-	.init		= ap_init_timer_of,
-};
-
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
 	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
 	{ /* Sentinel */ }
@@ -586,7 +582,7 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
 	.init_early	= ap_init_early,
 	.init_irq	= ap_init_irq_of,
 	.handle_irq	= fpga_handle_irq,
-	.timer		= &ap_of_timer,
+	.init_time	= ap_of_timer_init,
 	.init_machine	= ap_init_of,
 	.restart	= integrator_restart,
 	.dt_compat      = ap_dt_board_compat,
@@ -637,7 +633,7 @@ static struct platform_device cfi_flash_device = {
 	.resource	= &cfi_flash_resource,
 };
 
-static void __init ap_init_timer(void)
+static void __init ap_timer_init(void)
 {
 	struct clk *clk;
 	unsigned long rate;
@@ -656,10 +652,6 @@ static void __init ap_init_timer(void)
 				IRQ_TIMERINT1);
 }
 
-static struct sys_timer ap_timer = {
-	.init		= ap_init_timer,
-};
-
 #define INTEGRATOR_SC_VALID_INT	0x003fffff
 
 static void __init ap_init_irq(void)
@@ -716,7 +708,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	.init_early	= ap_init_early,
 	.init_irq	= ap_init_irq,
 	.handle_irq	= fpga_handle_irq,
-	.timer		= &ap_timer,
+	.init_time	= ap_timer_init,
 	.init_machine	= ap_init,
 	.restart	= integrator_restart,
 MACHINE_END

arch/arm/mach-integrator/integrator_cp.c

@@ -251,7 +251,7 @@ static void __init intcp_init_early(void)
 
 #ifdef CONFIG_OF
 
-static void __init intcp_timer_init_of(void)
+static void __init cp_of_timer_init(void)
 {
 	struct device_node *node;
 	const char *path;
@@ -283,10 +283,6 @@ static void __init intcp_timer_init_of(void)
 	sp804_clockevents_init(base, irq, node->name);
 }
 
-static struct sys_timer cp_of_timer = {
-	.init		= intcp_timer_init_of,
-};
-
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
 	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
 	{ /* Sentinel */ }
@@ -390,7 +386,7 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq_of,
 	.handle_irq	= fpga_handle_irq,
-	.timer		= &cp_of_timer,
+	.init_time	= cp_of_timer_init,
 	.init_machine	= intcp_init_of,
 	.restart	= integrator_restart,
 	.dt_compat      = intcp_dt_board_compat,
@@ -512,7 +508,7 @@ static void __init intcp_init_irq(void)
 #define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
 #define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
 
-static void __init intcp_timer_init(void)
+static void __init cp_timer_init(void)
 {
 	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
@@ -522,10 +518,6 @@ static void __init intcp_timer_init(void)
 	sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
 }
 
-static struct sys_timer cp_timer = {
-	.init		= intcp_timer_init,
-};
-
 #define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
 #define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
 
@@ -565,7 +557,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq,
 	.handle_irq	= fpga_handle_irq,
-	.timer		= &cp_timer,
+	.init_time	= cp_timer_init,
 	.init_machine	= intcp_init,
 	.restart	= integrator_restart,
 MACHINE_END