xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Garpu 0
Kode Masalah Tarik Permintaan Actions Packages Projects Rilis Wiki Kegiatan

ab8500_bm: Rename battery management platform data to something more logical

Telusuri Sumber 
The platform specific battery management configuration data structure
is currently called 'bat' short for 'battery'; however, it contains
information for all components of the battery management group, rather
than information pertaining to the battery itself - there are other
structures for that. So, in keeping with its structure namesake
'abx500_bm_data', we rename it to 'bm' here. Using similar logic,
we're also renaming 'bmdevs_of_probe' to the more device specific
'ab8500_bm_of_probe'.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Lee Jones
2012-11-30 10:09:42 +00:00
orang tua 8e3a71e56c
melakukan b0284de05e
6 mengubah file dengan 152 tambahan dan 152 penghapusan
Download Patch File Download Diff File Expand all files Collapse all files

24
drivers/power/ab8500_charger.c
Melihat File

@@ -189,7 +189,7 @@ struct ab8500_charger_usb_state {
* @autopower_cfg platform specific power config support for "pwron after pwrloss"
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
* @bat: Pointer to the abx500_bm platform data
* @bm: Platform specific battery management information
* @flags: Structure for information about events triggered
* @usb_state: Structure for usb stack information
* @ac_chg: AC charger power supply
@@ -226,7 +226,7 @@ struct ab8500_charger {
bool autopower_cfg;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
struct abx500_bm_data *bat;
struct abx500_bm_data *bm;
struct ab8500_charger_event_flags flags;
struct ab8500_charger_usb_state usb_state;
struct ux500_charger ac_chg;
@@ -1034,7 +1034,7 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
int min_value;
/* We should always use to lowest current limit */
min_value = min(di->bat->chg_params->usb_curr_max, ich_in);
min_value = min(di->bm->chg_params->usb_curr_max, ich_in);
switch (min_value) {
case 100:
@@ -1176,7 +1176,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
volt_index = ab8500_voltage_to_regval(vset);
curr_index = ab8500_current_to_regval(iset);
input_curr_index = ab8500_current_to_regval(
di->bat->chg_params->ac_curr_max);
di->bm->chg_params->ac_curr_max);
if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
dev_err(di->dev,
"Charger voltage or current too high, "
@@ -1193,7 +1193,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
}
/* MainChInputCurr: current that can be drawn from the charger*/
ret = ab8500_charger_set_main_in_curr(di,
di->bat->chg_params->ac_curr_max);
di->bm->chg_params->ac_curr_max);
if (ret) {
dev_err(di->dev, "%s Failed to set MainChInputCurr\n",
__func__);
@@ -1209,7 +1209,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
}
/* Check if VBAT overshoot control should be enabled */
if (!di->bat->enable_overshoot)
if (!di->bm->enable_overshoot)
overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N;
/* Enable Main Charger */
@@ -1376,7 +1376,7 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
return ret;
}
/* Check if VBAT overshoot control should be enabled */
if (!di->bat->enable_overshoot)
if (!di->bm->enable_overshoot)
overshoot = USB_CHG_NO_OVERSHOOT_ENA_N;
/* Enable USB Charger */
@@ -2454,8 +2454,8 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
ret = abx500_set_register_interruptible(di->dev,
AB8500_RTC,
AB8500_RTC_BACKUP_CHG_REG,
di->bat->bkup_bat_v |
di->bat->bkup_bat_i);
di->bm->bkup_bat_v |
di->bm->bkup_bat_i);
if (ret) {
dev_err(di->dev, "failed to setup backup battery charging\n");
goto out;
@@ -2644,10 +2644,10 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__);
return -ENOMEM;
}
di->bat = pdev->mfd_cell->platform_data;
if (!di->bat) {
di->bm = pdev->mfd_cell->platform_data;
if (!di->bm) {
if (np) {
ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
ret = ab8500_bm_of_probe(&pdev->dev, np, &di->bm);
if (ret) {
dev_err(&pdev->dev,
"failed to get battery information\n");