Merge tag 'm68k-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven:

  - Conversion of the Mac IDE driver to a platform driver

  - Minor cleanups and fixes

* tag 'm68k-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  ide/macide: Convert Mac IDE driver to platform driver
  m68k: Replace HTTP links with HTTPS ones
  m68k: mm: Remove superfluous memblock_alloc*() casts
  m68k: mm: Use PAGE_ALIGNED() helper
  m68k: Sort selects in main Kconfig
  m68k: amiga: Clean up Amiga hardware configuration
  m68k: Revive _TIF_* masks
  m68k: Correct some typos in comments
  m68k: Use get_kernel_nofault() in show_registers()
  zorro: Fix address space collision message with RAM expansion boards
  m68k: amiga: Fix Denise detection on OCS

drivers/ide/Kconfig

@@ -744,9 +744,10 @@ config BLK_DEV_MAC_IDE
 	depends on MAC
 	help
 	  This is the IDE driver for the on-board IDE interface on some m68k
-	  Macintosh models. It supports both the `Quadra style' (used in
-	  Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
-	  (used in the Powerbook 150 and 190 models) IDE interface.
+	  Macintosh models, namely Quadra/Centris 630, Performa 588 and
+	  Powerbook 150. The IDE interface on the Powerbook 190 is not
+	  supported by this driver and requires BLK_DEV_PLATFORM or
+	  PATA_PLATFORM.
 
 	  Say Y if you have such an Macintosh model and want to use IDE
 	  devices (hard disks, CD-ROM drives, etc.) that are connected to the

drivers/ide/macide.c

@@ -18,10 +18,11 @@
 #include <linux/delay.h>
 #include <linux/ide.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
 
 #include <asm/macintosh.h>
-#include <asm/macints.h>
-#include <asm/mac_baboon.h>
+
+#define DRV_NAME "mac_ide"
 
 #define IDE_BASE 0x50F1A000	/* Base address of IDE controller */
 
@@ -100,42 +101,61 @@ static const char *mac_ide_name[] =
  * Probe for a Macintosh IDE interface
  */
 
-static int __init macide_init(void)
+static int mac_ide_probe(struct platform_device *pdev)
 {
-	unsigned long base;
-	int irq;
+	struct resource *mem, *irq;
 	struct ide_hw hw, *hws[] = { &hw };
 	struct ide_port_info d = macide_port_info;
+	struct ide_host *host;
+	int rc;
 
 	if (!MACH_IS_MAC)
 		return -ENODEV;
 
-	switch (macintosh_config->ide_type) {
-	case MAC_IDE_QUADRA:
-		base = IDE_BASE;
-		irq = IRQ_NUBUS_F;
-		break;
-	case MAC_IDE_PB:
-		base = IDE_BASE;
-		irq = IRQ_NUBUS_C;
-		break;
-	case MAC_IDE_BABOON:
-		base = BABOON_BASE;
-		d.port_ops = NULL;
-		irq = IRQ_BABOON_1;
-		break;
-	default:
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem)
 		return -ENODEV;
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq)
+		return -ENODEV;
+
+	if (!devm_request_mem_region(&pdev->dev, mem->start,
+				     resource_size(mem), DRV_NAME)) {
+		dev_err(&pdev->dev, "resources busy\n");
+		return -EBUSY;
 	}
 
 	printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
 			 mac_ide_name[macintosh_config->ide_type - 1]);
 
-	macide_setup_ports(&hw, base, irq);
+	macide_setup_ports(&hw, mem->start, irq->start);
 
-	return ide_host_add(&d, hws, 1, NULL);
+	rc = ide_host_add(&d, hws, 1, &host);
+	if (rc)
+		return rc;
+
+	platform_set_drvdata(pdev, host);
+	return 0;
 }
 
-module_init(macide_init);
+static int mac_ide_remove(struct platform_device *pdev)
+{
+	struct ide_host *host = platform_get_drvdata(pdev);
 
+	ide_host_remove(host);
+	return 0;
+}
+
+static struct platform_driver mac_ide_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.probe  = mac_ide_probe,
+	.remove = mac_ide_remove,
+};
+
+module_platform_driver(mac_ide_driver);
+
+MODULE_ALIAS("platform:" DRV_NAME);
 MODULE_LICENSE("GPL");