mmc: sdhci: Handle auto-command errors

If the host controller supports auto-commands then enable the auto-command
error interrupt and handle it. In the case of auto-CMD23, the error is
treated the same as manual CMD23 error. In the case of auto-CMD12,
commands-during-transfer are not permitted, so the error handling is
treated the same as a data error.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sdhci.h

@@ -153,7 +153,8 @@
 #define  SDHCI_INT_ERROR_MASK	0xFFFF8000
 
 #define  SDHCI_INT_CMD_MASK	(SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
-		SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
+		SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \
+		SDHCI_INT_AUTO_CMD_ERR)
 #define  SDHCI_INT_DATA_MASK	(SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
 		SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
 		SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
@@ -169,6 +170,10 @@
 #define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE)
 
 #define SDHCI_AUTO_CMD_STATUS	0x3C
+#define  SDHCI_AUTO_CMD_TIMEOUT	0x00000002
+#define  SDHCI_AUTO_CMD_CRC	0x00000004
+#define  SDHCI_AUTO_CMD_END_BIT	0x00000008
+#define  SDHCI_AUTO_CMD_INDEX	0x00000010
 
 #define SDHCI_HOST_CONTROL2		0x3E
 #define  SDHCI_CTRL_UHS_MASK		0x0007