Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

arch/mips/kernel/traps.c

@@ -164,7 +164,7 @@ static void show_stacktrace(struct task_struct *task,
 	i = 0;
 	while ((unsigned long) sp & (PAGE_SIZE - 1)) {
 		if (i && ((i % (64 / field)) == 0))
-			printk("\n       ");
+			printk("\n	 ");
 		if (i > 39) {
 			printk(" ...");
 			break;
@@ -279,7 +279,7 @@ static void __show_regs(const struct pt_regs *regs)
 	printk("ra    : %0*lx %pS\n", field, regs->regs[31],
 	       (void *) regs->regs[31]);
 
-	printk("Status: %08x    ", (uint32_t) regs->cp0_status);
+	printk("Status: %08x	", (uint32_t) regs->cp0_status);
 
 	if (current_cpu_data.isa_level == MIPS_CPU_ISA_I) {
 		if (regs->cp0_status & ST0_KUO)
@@ -441,7 +441,7 @@ asmlinkage void do_be(struct pt_regs *regs)
 	int data = regs->cp0_cause & 4;
 	int action = MIPS_BE_FATAL;
 
-	/* XXX For now.  Fixme, this searches the wrong table ...  */
+	/* XXX For now.	 Fixme, this searches the wrong table ...  */
 	if (data && !user_mode(regs))
 		fixup = search_dbe_tables(exception_epc(regs));
 
@@ -518,7 +518,7 @@ static inline int simulate_ll(struct pt_regs *regs, unsigned int opcode)
 	offset >>= 16;
 
 	vaddr = (unsigned long __user *)
-	        ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+		((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
 
 	if ((unsigned long)vaddr & 3)
 		return SIGBUS;
@@ -558,7 +558,7 @@ static inline int simulate_sc(struct pt_regs *regs, unsigned int opcode)
 	offset >>= 16;
 
 	vaddr = (unsigned long __user *)
-	        ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+		((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
 	reg = (opcode & RT) >> 16;
 
 	if ((unsigned long)vaddr & 3)
@@ -739,7 +739,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
 
 		/* Restore the hardware register state */
-		own_fpu(1);	/* Using the FPU again.  */
+		own_fpu(1);	/* Using the FPU again.	 */
 
 		/* If something went wrong, signal */
 		process_fpemu_return(sig, fault_addr);
@@ -966,7 +966,7 @@ int cu2_notifier_call_chain(unsigned long val, void *v)
 }
 
 static int default_cu2_call(struct notifier_block *nfb, unsigned long action,
-        void *data)
+	void *data)
 {
 	struct pt_regs *regs = data;
 
@@ -974,7 +974,7 @@ static int default_cu2_call(struct notifier_block *nfb, unsigned long action,
 	default:
 		die_if_kernel("Unhandled kernel unaligned access or invalid "
 			      "instruction", regs);
-		/* Fall through  */
+		/* Fall through	 */
 
 	case CU2_EXCEPTION:
 		force_sig(SIGILL, current);
@@ -1029,10 +1029,10 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 		/*
 		 * Old (MIPS I and MIPS II) processors will set this code
 		 * for COP1X opcode instructions that replaced the original
-		 * COP3 space.  We don't limit COP1 space instructions in
+		 * COP3 space.	We don't limit COP1 space instructions in
 		 * the emulator according to the CPU ISA, so we want to
 		 * treat COP1X instructions consistently regardless of which
-		 * code the CPU chose.  Therefore we redirect this trap to
+		 * code the CPU chose.	Therefore we redirect this trap to
 		 * the FP emulator too.
 		 *
 		 * Then some newer FPU-less processors use this code
@@ -1044,9 +1044,9 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 		/* Fall through.  */
 
 	case 1:
-		if (used_math())	/* Using the FPU again.  */
+		if (used_math())	/* Using the FPU again.	 */
 			own_fpu(1);
-		else {			/* First time FPU user.  */
+		else {			/* First time FPU user.	 */
 			init_fpu();
 			set_used_math();
 		}
@@ -1114,7 +1114,7 @@ asmlinkage void do_mcheck(struct pt_regs *regs)
 	show_regs(regs);
 
 	if (multi_match) {
-		printk("Index   : %0x\n", read_c0_index());
+		printk("Index	: %0x\n", read_c0_index());
 		printk("Pagemask: %0x\n", read_c0_pagemask());
 		printk("EntryHi : %0*lx\n", field, read_c0_entryhi());
 		printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
@@ -1181,7 +1181,7 @@ asmlinkage void do_dsp(struct pt_regs *regs)
 asmlinkage void do_reserved(struct pt_regs *regs)
 {
 	/*
-	 * Game over - no way to handle this if it ever occurs.  Most probably
+	 * Game over - no way to handle this if it ever occurs.	 Most probably
 	 * caused by a new unknown cpu type or after another deadly
 	 * hard/software error.
 	 */
@@ -1705,7 +1705,7 @@ void __init trap_init(void)
 
 #if defined(CONFIG_KGDB)
 	if (kgdb_early_setup)
-		return;	/* Already done */
+		return; /* Already done */
 #endif
 
 	if (cpu_has_veic || cpu_has_vint) {
@@ -1799,7 +1799,7 @@ void __init trap_init(void)
 		 * The R6000 is the only R-series CPU that features a machine
 		 * check exception (similar to the R4000 cache error) and
 		 * unaligned ldc1/sdc1 exception.  The handlers have not been
-		 * written yet.  Well, anyway there is no R6000 machine on the
+		 * written yet.	 Well, anyway there is no R6000 machine on the
 		 * current list of targets for Linux/MIPS.
 		 * (Duh, crap, there is someone with a triple R6k machine)
 		 */