Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

Pull i2c-embedded changes from Wolfram Sang:
 "Major changes:

   - lots of devicetree additions for existing drivers.  I tried hard to
     make sure the bindings are proper.  In more complicated cases, I
     requested acks from people having more experience with them than
     me.  That took a bit of extra time and also some time went into
     discussions with developers about what bindings are and what not.
     I have the feeling that the workflow with bindings should be
     improved to scale better.  I will spend some more thought on
     this...

   - i2c-muxes are succesfully used meanwhile, so we dropped
     EXPERIMENTAL for them and renamed the drivers to a standard pattern
     to match the rest of the subsystem.  They can also be used with
     devicetree now.

   - ixp2000 was removed since the whole platform goes away.

   - cleanups (strlcpy instead of strcpy, NULL instead of 0)

   - The rest is typical driver fixes I assume.

  All patches have been in linux-next at least since v3.4-rc6."

Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the
same patch already having come in through the arm/soc trees, with
additional patches on top of it.

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits)
  i2c: davinci: Free requested IRQ in remove
  i2c: ocores: register OF i2c devices
  i2c: tegra: notify transfer-complete after clearing status.
  I2C: xiic: Add OF binding support
  i2c: Rename last mux driver to standard pattern
  i2c: tegra: fix 10bit address configuration
  i2c: muxes: rename first set of drivers to a standard pattern
  of/i2c: implement of_find_i2c_adapter_by_node
  i2c: implement i2c_verify_adapter
  i2c-s3c2410: Add HDMIPHY quirk for S3C2440
  i2c-s3c2410: Rework device type handling
  i2c: muxes are not EXPERIMENTAL anymore
  i2c/of: Automatically populate i2c mux busses from device tree data.
  i2c: Add a struct device * parameter to i2c_add_mux_adapter()
  of/i2c: call i2c_verify_client from of_find_i2c_device_by_node
  i2c: designware: Add clk_{un}prepare() support
  i2c: designware: add PM support
  i2c: ixp2000: remove driver
  i2c: pnx: add device tree support
  i2c: imx: don't use strcpy but strlcpy
  ...

Documentation/devicetree/bindings/i2c/mux.txt

@@ -0,0 +1,60 @@
+Common i2c bus multiplexer/switch properties.
+
+An i2c bus multiplexer/switch will have several child busses that are
+numbered uniquely in a device dependent manner.  The nodes for an i2c bus
+multiplexer/switch will have one child node for each child
+bus.
+
+Required properties:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Required properties for child nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The sub-bus number.
+
+Optional properties for child nodes:
+- Other properties specific to the multiplexer/switch hardware.
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+	/*
+	   An NXP pca9548 8 channel I2C multiplexer at address 0x70
+	   with two NXP pca8574 GPIO expanders attached, one each to
+	   ports 3 and 4.
+	 */
+
+	mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			gpio1: gpio@38 {
+				compatible = "nxp,pca8574";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			gpio2: gpio@38 {
+				compatible = "nxp,pca8574";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+	};

Documentation/devicetree/bindings/i2c/samsung-i2c.txt

@@ -6,14 +6,18 @@ Required properties:
   - compatible: value should be either of the following.
       (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
       (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+      (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
+          inside HDMIPHY block found on several samsung SoCs
   - reg: physical base address of the controller and length of memory mapped
     region.
   - interrupts: interrupt number to the cpu.
   - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
-  - gpios: The order of the gpios should be the following: <SDA, SCL>.
-    The gpio specifier depends on the gpio controller.
 
 Optional properties:
+  - gpios: The order of the gpios should be the following: <SDA, SCL>.
+    The gpio specifier depends on the gpio controller. Required in all
+    cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
+    lines are permanently wired to the respective client
   - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
     specified, default value is 0.
   - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not

Documentation/devicetree/bindings/i2c/xiic.txt

@@ -0,0 +1,22 @@
+Xilinx IIC controller:
+
+Required properties:
+- compatible : Must be "xlnx,xps-iic-2.00.a"
+- reg : IIC register location and length
+- interrupts : IIC controller unterrupt
+- #address-cells = <1>
+- #size-cells = <0>
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example:
+
+	axi_iic_0: i2c@40800000 {
+		compatible = "xlnx,xps-iic-2.00.a";
+		interrupts = < 1 2 >;
+		reg = < 0x40800000 0x10000 >;
+
+		#size-cells = <0>;
+		#address-cells = <1>;
+	};