Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (110 commits)
  [SCSI] qla2xxx: Refactor call to qla2xxx_read_sfp for thermal temperature.
  [SCSI] qla2xxx: Unify the read/write sfp mailbox command routines.
  [SCSI] qla2xxx: Clear complete initialization control block.
  [SCSI] qla2xxx: Allow an override of the registered maximum LUN.
  [SCSI] qla2xxx: Add host number in reset and quiescent message logs.
  [SCSI] qla2xxx: Correctly read sfp single byte mailbox register.
  [SCSI] qla2xxx: Add qla82xx_rom_unlock() function.
  [SCSI] qla2xxx: Log if qla82xx firmware fails to load from flash.
  [SCSI] qla2xxx: Use passed in host to initialize local scsi_qla_host in queuecommand function
  [SCSI] qla2xxx: Correct buffer start in edc sysfs debug print.
  [SCSI] qla2xxx: Update firmware version after flash update for ISP82xx.
  [SCSI] qla2xxx: Fix hang during driver unload when vport is active.
  [SCSI] qla2xxx: Properly set the dsd_list_len for dsd_chaining in cmd type 6.
  [SCSI] qla2xxx: Fix virtual port failing to login after chip reset.
  [SCSI] qla2xxx: Fix vport delete hang when logins are outstanding.
  [SCSI] hpsa: Change memset using sizeof(ptr) to sizeof(*ptr)
  [SCSI] ipr: Rate limit DMA mapping errors
  [SCSI] hpsa: add P2000 to list of shared SAS devices
  [SCSI] hpsa: do not attempt PCI power management reset method if we know it won't work.
  [SCSI] hpsa: remove superfluous sleeps around reset code
  ...

drivers/message/fusion/mptbase.h

@@ -76,8 +76,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2008 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.04.18"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.18"
+#define MPT_LINUX_VERSION_COMMON	"3.04.19"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.19"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \

drivers/message/fusion/mptsas.c

@@ -5012,7 +5012,6 @@ mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
 			(ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)) {
 			VirtTarget *vtarget = NULL;
 			u8		id, channel;
-			u32	 log_info = le32_to_cpu(reply->IOCLogInfo);
 
 			id = sas_event_data->TargetID;
 			channel = sas_event_data->Bus;
@@ -5023,7 +5022,8 @@ mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
 				    "LogInfo (0x%x) available for "
 				   "INTERNAL_DEVICE_RESET"
 				   "fw_id %d fw_channel %d\n", ioc->name,
-				   log_info, id, channel));
+				   le32_to_cpu(reply->IOCLogInfo),
+				   id, channel));
 				if (vtarget->raidVolume) {
 					devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 					"Skipping Raid Volume for inDMD\n",

drivers/message/fusion/mptscsih.c

@@ -1415,11 +1415,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p, done()=%p\n",
 		ioc->name, SCpnt, done));
 
-	if (ioc->taskmgmt_quiesce_io) {
-		dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
-			ioc->name, SCpnt));
+	if (ioc->taskmgmt_quiesce_io)
 		return SCSI_MLQUEUE_HOST_BUSY;
-	}
 
 	/*
 	 *  Put together a MPT SCSI request...
@@ -1773,7 +1770,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 	int		 scpnt_idx;
 	int		 retval;
 	VirtDevice	 *vdevice;
-	ulong	 	 sn = SCpnt->serial_number;
 	MPT_ADAPTER	*ioc;
 
 	/* If we can't locate our host adapter structure, return FAILED status.
@@ -1859,8 +1855,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 			 vdevice->vtarget->id, vdevice->lun,
 			 ctx2abort, mptscsih_get_tm_timeout(ioc));
 
-	if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx &&
-	    SCpnt->serial_number == sn) {
+	if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) {
 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 		    "task abort: command still in active list! (sc=%p)\n",
 		    ioc->name, SCpnt));
@@ -1873,9 +1868,9 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 	}
 
  out:
-	printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p) (sn=%ld)\n",
+	printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n",
 	    ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval,
-	    SCpnt, SCpnt->serial_number);
+	    SCpnt);
 
 	return retval;
 }

drivers/message/fusion/mptspi.c

@@ -867,6 +867,10 @@ static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
 	struct _x_config_parms cfg;
 	struct _CONFIG_PAGE_HEADER hdr;
 	int err = -EBUSY;
+	u32 nego_parms;
+	u32 period;
+	struct scsi_device *sdev;
+	int i;
 
 	/* don't allow updating nego parameters on RAID devices */
 	if (starget->channel == 0 &&
@@ -904,6 +908,24 @@ static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
 	pg1->Header.PageNumber = hdr.PageNumber;
 	pg1->Header.PageType = hdr.PageType;
 
+	nego_parms = le32_to_cpu(pg1->RequestedParameters);
+	period = (nego_parms & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK) >>
+		MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD;
+	if (period == 8) {
+		/* Turn on inline data padding for TAPE when running U320 */
+		for (i = 0 ; i < 16; i++) {
+			sdev = scsi_device_lookup_by_target(starget, i);
+			if (sdev && sdev->type == TYPE_TAPE) {
+				sdev_printk(KERN_DEBUG, sdev, MYIOC_s_FMT
+					    "IDP:ON\n", ioc->name);
+				nego_parms |= MPI_SCSIDEVPAGE1_RP_IDP;
+				pg1->RequestedParameters =
+				    cpu_to_le32(nego_parms);
+				break;
+			}
+		}
+	}
+
 	mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters));
 
 	if (mpt_config(ioc, &cfg)) {

drivers/message/i2o/i2o_scsi.c

@@ -361,7 +361,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
 	 */
 	error = le32_to_cpu(msg->body[0]);
 
-	osm_debug("Completed %ld\n", cmd->serial_number);
+	osm_debug("Completed %0x%p\n", cmd);
 
 	cmd->result = error & 0xff;
 	/*
@@ -678,7 +678,7 @@ static int i2o_scsi_queuecommand_lck(struct scsi_cmnd *SCpnt,
 	/* Queue the message */
 	i2o_msg_post(c, msg);
 
-	osm_debug("Issued %ld\n", SCpnt->serial_number);
+	osm_debug("Issued %0x%p\n", SCpnt);
 
 	return 0;