xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Atdalīts 0
Kods Problēmas Izmaiņu pieprasījumi Darbības Pakotnes Projekti Laidieni Vikivietne Aktivitāte

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pārlūkot izejas kodu 
Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Among the things new for this release
  are:

   - More support for the AM33xx platforms from TI
   - Tegra 124 support, and some updates to older tegra families as well
   - imx cleanups and updates across the board
   - A rename of Broadcom's Mobile platforms which were introduced as
     ARCH_BCM, and turned out to be too broad a name.  New name is
     ARCH_BCM_MOBILE.
   - A whole bunch of updates and fixes for integrator, making the
     platform code more modern and switches over to DT-only booting.
   - Support for two new Renesas shmobile chipsets.  Next up for them is
     more work on consolidation instead of introduction of new
     non-multiplatform SoCs, we're all looking forward to that!
   - Misc cleanups for older Samsung platforms, some Allwinner updates,
     etc"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
  ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
  ARM: bcm_defconfig: Run "make savedefconfig"
  ARM: bcm281xx: Add ARCH Timers to config
  rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
  ARM: vexpress: Enable platform-specific options in defconfig
  ARM: vexpress: Make defconfig work again
  ARM: sunxi: remove .init_time hooks
  ARM: imx: enable suspend for imx6sl
  ARM: imx: ensure dsm_request signal is not asserted when setting LPM
  ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
  ARM: imx6q: move low-power code out of clock driver
  ARM: imx: drop extern with function prototypes in common.h
  ARM: imx: reset core along with enable/disable operation
  ARM: imx: do not return from imx_cpu_die() call
  ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
  ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
  ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
  ARM: imx: replace imx6q_restart() with mxc_restart()
  ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
  ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
  ...
Šī revīzija ir iekļauta:
Linus Torvalds
2013-11-11 16:49:45 +09:00
vecāks 21604cdcdc 005ff5fb07
revīzija aac59e3efc
189 mainīti faili ar 8186 papildinājumiem un 5215 dzēšanām
Lejupielādēt ielāpa failu Lejupielādēt izmaiņu failu Izvērst visus failus Savērst visus failus

1
arch/arm/mach-highbank/Kconfig
Parādīt failu

@@ -10,6 +10,7 @@ config ARCH_HIGHBANK
select ARM_ERRATA_775420
select ARM_ERRATA_798181
select ARM_GIC
select ARM_PSCI
select ARM_TIMER_SP804
select CACHE_L2X0
select COMMON_CLK

2
arch/arm/mach-highbank/Makefile
Parādīt failu

@@ -3,6 +3,4 @@ obj-y := highbank.o system.o smc.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_PM_SLEEP) += pm.o

4
arch/arm/mach-highbank/core.h
Parādīt failu

@@ -3,7 +3,6 @@
#include <linux/reboot.h>
extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
extern void highbank_restart(enum reboot_mode, const char *);
extern void __iomem *scu_base_addr;
@@ -14,8 +13,5 @@ static inline void highbank_pm_init(void) {}
#endif
extern void highbank_smc1(int fn, int arg);
extern void highbank_cpu_die(unsigned int cpu);
extern struct smp_operations highbank_smp_ops;
#endif

24
arch/arm/mach-highbank/highbank.c
Parādīt failu

@@ -24,10 +24,9 @@
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/smp_plat.h>
#include <asm/psci.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -48,17 +47,6 @@ static void __init highbank_scu_map_io(void)
scu_base_addr = ioremap(base, SZ_4K);
}
#define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu)))
#define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
HB_JUMP_TABLE_PHYS(cpu) + 15);
}
static void highbank_l2x0_disable(void)
{
@@ -138,6 +126,10 @@ static struct notifier_block highbank_platform_nb = {
.notifier_call = highbank_platform_notifier,
};
static struct platform_device highbank_cpuidle_device = {
.name = "cpuidle-calxeda",
};
static void __init highbank_init(void)
{
struct device_node *np;
@@ -154,6 +146,9 @@ static void __init highbank_init(void)
bus_register_notifier(&amba_bustype, &highbank_amba_nb);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
if (psci_ops.cpu_suspend)
platform_device_register(&highbank_cpuidle_device);
}
static const char *highbank_match[] __initconst = {
@@ -166,7 +161,6 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
.dma_zone_size = (4ULL * SZ_1G),
#endif
.smp = smp_ops(highbank_smp_ops),
.init_irq = highbank_init_irq,
.init_machine = highbank_init,
.dt_compat = highbank_match,

37
arch/arm/mach-highbank/hotplug.c
Parādīt failu

@@ -1,37 +0,0 @@
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <asm/cacheflush.h>
#include "core.h"
#include "sysregs.h"
extern void secondary_startup(void);
/*
* platform-specific code to shutdown a CPU
*
*/
void __ref highbank_cpu_die(unsigned int cpu)
{
highbank_set_cpu_jump(cpu, phys_to_virt(0));
flush_cache_louis();
highbank_set_core_pwr();
while (1)
cpu_do_idle();
}

68
arch/arm/mach-highbank/platsmp.c
Parādīt failu

@@ -1,68 +0,0 @@
/*
* Copyright 2010-2011 Calxeda, Inc.
* Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <asm/smp_scu.h>
#include "core.h"
extern void secondary_startup(void);
static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
highbank_set_cpu_jump(cpu, secondary_startup);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
}
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
static void __init highbank_smp_init_cpus(void)
{
unsigned int i, ncores = 4;
/* sanity check */
if (ncores > NR_CPUS) {
printk(KERN_WARNING
"highbank: no. of cores (%d) greater than configured "
"maximum of %d - clipping\n",
ncores, NR_CPUS);
ncores = NR_CPUS;
}
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
}
static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
{
if (scu_base_addr)
scu_enable(scu_base_addr);
}
struct smp_operations highbank_smp_ops __initdata = {
.smp_init_cpus = highbank_smp_init_cpus,
.smp_prepare_cpus = highbank_smp_prepare_cpus,
.smp_boot_secondary = highbank_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = highbank_cpu_die,
#endif
};

27
arch/arm/mach-highbank/pm.c
Parādīt failu

@@ -16,27 +16,19 @@
#include <linux/cpu_pm.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include "core.h"
#include "sysregs.h"
#include <asm/psci.h>
static int highbank_suspend_finish(unsigned long val)
{
outer_flush_all();
outer_disable();
const struct psci_power_state ps = {
.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
.affinity_level = 1,
};
highbank_set_pwr_suspend();
cpu_do_idle();
highbank_clear_pwr_request();
return 0;
return psci_ops.cpu_suspend(ps, __pa(cpu_resume));
}
static int highbank_pm_enter(suspend_state_t state)
@@ -44,15 +36,11 @@ static int highbank_pm_enter(suspend_state_t state)
cpu_pm_enter();
cpu_cluster_pm_enter();
highbank_set_cpu_jump(0, cpu_resume);
cpu_suspend(0, highbank_suspend_finish);
cpu_cluster_pm_exit();
cpu_pm_exit();
highbank_smc1(0x102, 0x1);
if (scu_base_addr)
scu_enable(scu_base_addr);
return 0;
}
@@ -63,5 +51,8 @@ static const struct platform_suspend_ops highbank_pm_ops = {
void __init highbank_pm_init(void)
{
if (!psci_ops.cpu_suspend)
return;
suspend_set_ops(&highbank_pm_ops);
}