[MIPS] Move arch/mips/philips to arch/mips/nxp

Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/nxp/pnx8550/common/time.c

@@ -0,0 +1,150 @@
+/*
+ * Copyright 2001, 2002, 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Common time service routines for MIPS machines. See
+ * Documents/MIPS/README.txt.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/debug.h>
+
+#include <int.h>
+#include <cm.h>
+
+static unsigned long cpj;
+
+static cycle_t hpt_read(void)
+{
+	return read_c0_count2();
+}
+
+static struct clocksource pnx_clocksource = {
+	.name		= "pnx8xxx",
+	.rating		= 200,
+	.read		= hpt_read,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/* clear MATCH, signal the event */
+	c->event_handler(c);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction pnx8xxx_timer_irq = {
+	.handler	= pnx8xxx_timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_PERCPU,
+	.name		= "pnx8xxx_timer",
+};
+
+static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
+{
+	/* Timer 2 clear interrupt */
+	write_c0_compare2(-1);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction monotonic_irqaction = {
+	.handler = monotonic_interrupt,
+	.flags = IRQF_DISABLED,
+	.name = "Monotonic timer",
+};
+
+static int pnx8xxx_set_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	write_c0_compare(delta);
+	return 0;
+}
+
+static struct clock_event_device pnx8xxx_clockevent = {
+	.name		= "pnx8xxx_clockevent",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event = pnx8xxx_set_next_event,
+};
+
+static inline void timer_ack(void)
+{
+	write_c0_compare(cpj);
+}
+
+__init void plat_time_init(void)
+{
+	unsigned int configPR;
+	unsigned int n;
+	unsigned int m;
+	unsigned int p;
+	unsigned int pow2p;
+
+	clockevents_register_device(&pnx8xxx_clockevent);
+	clocksource_register(&pnx_clocksource);
+
+	/* Timer 1 start */
+	configPR = read_c0_config7();
+	configPR &= ~0x00000008;
+	write_c0_config7(configPR);
+
+	/* Timer 2 start */
+	configPR = read_c0_config7();
+	configPR &= ~0x00000010;
+	write_c0_config7(configPR);
+
+	/* Timer 3 stop */
+	configPR = read_c0_config7();
+	configPR |= 0x00000020;
+	write_c0_config7(configPR);
+
+
+        /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
+        /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1:  FIXME) */
+
+        n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16;
+        m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8;
+        p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2;
+	pow2p = (1 << p);
+
+	db_assert(m != 0 && pow2p != 0);
+
+        /*
+	 * Compute the frequency as in the PNX8550 User Manual 1.0, p.186
+	 * (a.k.a. 8-10).  Divide by HZ for a timer offset that results in
+	 * HZ timer interrupts per second.
+	 */
+	mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
+	cpj = (mips_hpt_frequency + HZ / 2) / HZ;
+	write_c0_count(0);
+	timer_ack();
+
+	/* Setup Timer 2 */
+	write_c0_count2(0);
+	write_c0_compare2(0xffffffff);
+
+	setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq);
+	setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
+}