xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
انشعاب 0
کد مسائل تقاضاهای واکشی Actions Packages پروژه‌ها انتشارها دانشنامه فعالیت

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

فهرست منبع 
Pull ARM SoC device tree conversions from Arnd Bergmann:
 "These are device tree conversions for a number of platforms, with the
  intention of turning code from board files into device tree
  descriptions.  Notable changes are:

   - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c

   - nomadik bindings for all devices, removing the board files

   - bcm2835 bindings for mmc and i2c

   - tegra bindings for hdmi, keyboard, audio, as well as some updates

   - at91 bindings for hardware ecc and for devices on RM9200

   - mxs bindings for cfa100xx

   - sunxi support for Miniand Hackberry board"

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits)
  Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"
  Revert "sunxi: a13-olinuxino: Add user LED to the device tree"
  clk: tegra: initialise parent of uart clocks
  ARM: tegra: remove clock-frequency properties from serial nodes
  clk: tegra: fix driver to match DT binding
  clk: tegra: local arrays should be static
  clk: tegra: Add missing spinlock for hclk and pclk
  clk: tegra: Implement locking for super clock
  clk: tegra: fix wrong clock index between se to sata_cold
  sunxi: a13-olinuxino: Add user LED to the device tree
  ARM: davinci: da850 DT: add support for machine reboot
  ARM: davinci: da850: add wdt DT node
  ARM: davinci: da850: add DT node for I2C0
  ARM: at91: at91sam9n12: add DT parameters to enable PMECC
  ARM: at91: at91sam9x5: add DT parameters to enable PMECC
  ARM: at91: add EMAC bindings to RM9200 DT
  ARM: at91: add SSC bindings to RM9200 DT
  ARM: at91: add MMC bindings to RM9200 DT
  ARM: at91: Animeo IP: enable watchdog support
  ARM: nomadik: fix OF compilation regression
  ...
This commit is contained in:
Linus Torvalds
2013-02-21 15:38:49 -08:00
والد 6c5096e553 89dfe564b5
کامیت a8f3740feb
57فایلهای تغییر یافته به همراه2770 افزوده شده و 804 حذف شده
دانلود پرونده وصله دانلود فایل تغییرات diff Expand all files Collapse all files

5
arch/arm/boot/dts/Makefile
مشاهده پرونده

@@ -96,11 +96,13 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-apf28dev.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
imx28-cfa10037.dtb \
imx28-cfa10049.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-beagle.dtb \
omap3-beagle-xm.dtb \
@@ -135,8 +137,10 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
sun4i-a10-hackberry.dtb \
sun5i-a13-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-iris-512.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-plutux.dtb \
@@ -145,6 +149,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-whistler.dtb \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
tegra114-dalmore.dtb \

4
arch/arm/boot/dts/animeo_ip.dts
مشاهده پرونده

@@ -78,6 +78,10 @@
bus-width = <4>;
};
};
watchdog@fffffd40 {
status = "okay";
};
};
nand0: nand@40000000 {

158
arch/arm/boot/dts/at91rm9200.dtsi
مشاهده پرونده

@@ -29,6 +29,9 @@
gpio3 = &pioD;
tcb0 = &tcb0;
tcb1 = &tcb1;
ssc0 = &ssc0;
ssc1 = &ssc1;
ssc2 = &ssc2;
};
cpus {
cpu@0 {
@@ -88,6 +91,52 @@
interrupts = <20 4 0 21 4 0 22 4 0>;
};
mmc0: mmc@fffb4000 {
compatible = "atmel,hsmci";
reg = <0xfffb4000 0x4000>;
interrupts = <10 4 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ssc0: ssc@fffd0000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd0000 0x4000>;
interrupts = <14 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disable";
};
ssc1: ssc@fffd4000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd4000 0x4000>;
interrupts = <15 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disable";
};
ssc2: ssc@fffd8000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffd8000 0x4000>;
interrupts = <16 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
status = "disable";
};
macb0: ethernet@fffbc000 {
compatible = "cdns,at91rm9200-emac", "cdns,emac";
reg = <0xfffbc000 0x4000>;
interrupts = <24 4 3>;
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
@@ -207,6 +256,115 @@
};
};
macb {
pinctrl_macb_rmii: macb_rmii-0 {
atmel,pins =
<0 7 0x1 0x0 /* PA7 periph A */
0 8 0x1 0x0 /* PA8 periph A */
0 9 0x1 0x0 /* PA9 periph A */
0 10 0x1 0x0 /* PA10 periph A */
0 11 0x1 0x0 /* PA11 periph A */
0 12 0x1 0x0 /* PA12 periph A */
0 13 0x1 0x0 /* PA13 periph A */
0 14 0x1 0x0 /* PA14 periph A */
0 15 0x1 0x0 /* PA15 periph A */
0 16 0x1 0x0>; /* PA16 periph A */
};
pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
atmel,pins =
<1 12 0x2 0x0 /* PB12 periph B */
1 13 0x2 0x0 /* PB13 periph B */
1 14 0x2 0x0 /* PB14 periph B */
1 15 0x2 0x0 /* PB15 periph B */
1 16 0x2 0x0 /* PB16 periph B */
1 17 0x2 0x0 /* PB17 periph B */
1 18 0x2 0x0 /* PB18 periph B */
1 19 0x2 0x0>; /* PB19 periph B */
};
};
mmc0 {
pinctrl_mmc0_clk: mmc0_clk-0 {
atmel,pins =
<0 27 0x1 0x0>; /* PA27 periph A */
};
pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
atmel,pins =
<0 28 0x1 0x1 /* PA28 periph A with pullup */
0 29 0x1 0x1>; /* PA29 periph A with pullup */
};
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
atmel,pins =
<1 3 0x2 0x1 /* PB3 periph B with pullup */
1 4 0x2 0x1 /* PB4 periph B with pullup */
1 5 0x2 0x1>; /* PB5 periph B with pullup */
};
pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
atmel,pins =
<0 8 0x2 0x1 /* PA8 periph B with pullup */
0 9 0x2 0x1>; /* PA9 periph B with pullup */
};
pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
atmel,pins =
<0 10 0x2 0x1 /* PA10 periph B with pullup */
0 11 0x2 0x1 /* PA11 periph B with pullup */
0 12 0x2 0x1>; /* PA12 periph B with pullup */
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<1 0 0x1 0x0 /* PB0 periph A */
1 1 0x1 0x0 /* PB1 periph A */
1 2 0x1 0x0>; /* PB2 periph A */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<1 3 0x1 0x0 /* PB3 periph A */
1 4 0x1 0x0 /* PB4 periph A */
1 5 0x1 0x0>; /* PB5 periph A */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<1 6 0x1 0x0 /* PB6 periph A */
1 7 0x1 0x0 /* PB7 periph A */
1 8 0x1 0x0>; /* PB8 periph A */
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<1 9 0x1 0x0 /* PB9 periph A */
1 10 0x1 0x0 /* PB10 periph A */
1 11 0x1 0x0>; /* PB11 periph A */
};
};
ssc2 {
pinctrl_ssc2_tx: ssc2_tx-0 {
atmel,pins =
<1 12 0x1 0x0 /* PB12 periph A */
1 13 0x1 0x0 /* PB13 periph A */
1 14 0x1 0x0>; /* PB14 periph A */
};
pinctrl_ssc2_rx: ssc2_rx-0 {
atmel,pins =
<1 15 0x1 0x0 /* PB15 periph A */
1 16 0x1 0x0 /* PB16 periph A */
1 17 0x1 0x0>; /* PB17 periph A */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;

5
arch/arm/boot/dts/at91rm9200ek.dts
مشاهده پرونده

@@ -44,6 +44,11 @@
status = "okay";
};
macb0: ethernet@fffbc000 {
phy-mode = "rmii";
status = "okay";
};
usb1: gadget@fffb0000 {
atmel,vbus-gpio = <&pioD 4 0>;
status = "okay";

3
arch/arm/boot/dts/at91sam9n12.dtsi
مشاهده پرونده

@@ -382,8 +382,9 @@
reg = < 0x40000000 0x10000000
0xffffe000 0x00000600
0xffffe600 0x00000200
0x00100000 0x00100000
0x00108000 0x00018000
>;
atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";

5
arch/arm/boot/dts/at91sam9n12ek.dts
مشاهده پرونده

@@ -71,7 +71,10 @@
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-ecc-mode = "hw";
atmel,has-pmecc;
atmel,pmecc-cap = <2>;
atmel,pmecc-sector-size = <512>;
nand-on-flash-bbt;
status = "okay";
};

4
arch/arm/boot/dts/at91sam9x5.dtsi
مشاهده پرونده

@@ -512,7 +512,11 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x10000000
0xffffe000 0x600 /* PMECC Registers */
0xffffe600 0x200 /* PMECC Error Location Registers */
0x00108000 0x18000 /* PMECC looup table in ROM code */
>;
atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";

5
arch/arm/boot/dts/at91sam9x5cm.dtsi
مشاهده پرونده

@@ -26,7 +26,10 @@
ahb {
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-ecc-mode = "hw";
atmel,has-pmecc; /* Enable PMECC */
atmel,pmecc-cap = <2>;
atmel,pmecc-sector-size = <512>;
nand-on-flash-bbt;
status = "okay";

16
arch/arm/boot/dts/bcm2835-rpi-b.dts
مشاهده پرونده

@@ -1,5 +1,4 @@
/dts-v1/;
/memreserve/ 0x0c000000 0x04000000;
/include/ "bcm2835.dtsi"
/ {
@@ -25,3 +24,18 @@
brcm,function = <7>; /* alt3 */
};
};
&i2c0 {
status = "okay";
clock-frequency = <100000>;
};
&i2c1 {
status = "okay";
clock-frequency = <100000>;
};
&sdhci {
status = "okay";
bus-width = <4>;
};

44
arch/arm/boot/dts/bcm2835.dtsi
مشاهده پرونده

@@ -63,5 +63,49 @@
interrupt-controller;
#interrupt-cells = <2>;
};
i2c0: i2c@20205000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e205000 0x1000>;
interrupts = <2 21>;
clocks = <&clk_i2c>;
status = "disabled";
};
i2c1: i2c@20804000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
interrupts = <2 21>;
clocks = <&clk_i2c>;
status = "disabled";
};
sdhci: sdhci {
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
interrupts = <2 30>;
clocks = <&clk_mmc>;
status = "disabled";
};
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk_mmc: mmc {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <100000000>;
};
clk_i2c: i2c {
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
clock-frequency = <150000000>;
};
};
};

20
arch/arm/boot/dts/da850-evm.dts
مشاهده پرونده

@@ -15,6 +15,9 @@
model = "DA850/AM1808/OMAP-L138 EVM";
soc {
pmx_core: pinmux@1c14120 {
status = "okay";
};
serial0: serial@1c42000 {
status = "okay";
};
@@ -24,5 +27,22 @@
serial2: serial@1d0d000 {
status = "okay";
};
rtc0: rtc@1c23000 {
status = "okay";
};
i2c0: i2c@1c22000 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
};
wdt: wdt@1c21000 {
status = "okay";
};
};
nand_cs3@62000000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_cs3_pins>;
};
};

70
arch/arm/boot/dts/da850.dtsi
مشاهده پرونده

@@ -28,14 +28,47 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x01c00000 0x400000>;
interrupt-parent = <&intc>;
pmx_core: pinmux@1c14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
status = "disabled";
nand_cs3_pins: pinmux_nand_pins {
pinctrl-single,bits = <
/* EMA_OE, EMA_WE */
0x1c 0x00110000 0x00ff0000
/* EMA_CS[4],EMA_CS[3]*/
0x1c 0x00000110 0x00000ff0
/*
* EMA_D[0], EMA_D[1], EMA_D[2],
* EMA_D[3], EMA_D[4], EMA_D[5],
* EMA_D[6], EMA_D[7]
*/
0x24 0x11111111 0xffffffff
/* EMA_A[1], EMA_A[2] */
0x30 0x01100000 0x0ff00000
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,bits = <
/* I2C0_SDA,I2C0_SCL */
0x10 0x00002200 0x0000ff00
>;
};
};
serial0: serial@1c42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <25>;
interrupt-parent = <&intc>;
status = "disabled";
};
serial1: serial@1d0c000 {
@@ -44,7 +77,6 @@
clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <53>;
interrupt-parent = <&intc>;
status = "disabled";
};
serial2: serial@1d0d000 {
@@ -53,8 +85,40 @@
clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <61>;
interrupt-parent = <&intc>;
status = "disabled";
};
rtc0: rtc@1c23000 {
compatible = "ti,da830-rtc";
reg = <0x23000 0x1000>;
interrupts = <19
19>;
status = "disabled";
};
i2c0: i2c@1c22000 {
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
interrupts = <15>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
wdt: wdt@1c21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
status = "disabled";
};
};
nand_cs3@62000000 {
compatible = "ti,davinci-nand";
reg = <0x62000000 0x807ff
0x68000000 0x8000>;
ti,davinci-chipselect = <1>;
ti,davinci-mask-ale = <0>;
ti,davinci-mask-cle = <0>;
ti,davinci-mask-chipsel = <0>;
ti,davinci-ecc-mode = "hw";
ti,davinci-ecc-bits = <4>;
ti,davinci-nand-use-bbt;
status = "disabled";
};
};

77
arch/arm/boot/dts/imx28-cfa10037.dts Normal file
مشاهده پرونده

@@ -0,0 +1,77 @@
/*
* Copyright 2012 Free Electrons
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/*
* The CFA-10049 is an expansion board for the CFA-10036 module, thus we
* need to include the CFA-10036 DTS.
*/
/include/ "imx28-cfa10036.dts"
/ {
model = "Crystalfontz CFA-10037 Board";
compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
pinctrl-names = "default", "default";
pinctrl-1 = <&hog_pins_cfa10037>;
hog_pins_cfa10037: hog-10037@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
};
apbx@80040000 {
usbphy1: usbphy@8007e000 {
status = "okay";
};
};
};
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <&reg_usb1_vbus>;
pinctrl-0 = <&usbphy1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
phy-reset-gpios = <&gpio2 21 0>;
phy-reset-duration = <100>;
status = "okay";
};
};
regulators {
compatible = "simple-bus";
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
};
};

220
arch/arm/boot/dts/imx28-cfa10049.dts
مشاهده پرونده

@@ -23,69 +23,120 @@
apbh@80000000 {
pinctrl@80018000 {
pinctrl-names = "default", "default";
pinctrl-1 = <&hog_pins_cfa10049>;
pinctrl-1 = <&hog_pins_cfa10049
&hog_pins_cfa10049_pullup>;
hog_pins_cfa10049: hog-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
spi3_pins_cfa10049: spi3-cfa10049@0 {
hog_pins_cfa10049_pullup: hog-10049-pullup@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */
0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */
0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
spi2_pins_cfa10049: spi2-cfa10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
spi3_pins_cfa10049: spi3-cfa10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
lcdif_pins_cfa10049: lcdif-evk@0 {
reg = <0>;
fsl,pinmux-ids = <
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
ssp3: ssp@80016000 {
compatible = "fsl,imx28-spi";
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&spi3_pins_cfa10049>;
pinctrl-0 = <&lcdif_18bit_pins_cfa10049
&lcdif_pins_cfa10049>;
status = "okay";
gpio5: gpio5@0 {
compatible = "fairchild,74hc595";
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
registers-number = <2>;
spi-max-frequency = <100000>;
};
gpio6: gpio6@1 {
compatible = "fairchild,74hc595";
gpio-controller;
#gpio-cells = <2>;
reg = <1>;
registers-number = <4>;
spi-max-frequency = <100000>;
};
dac0: dh2228@2 {
compatible = "rohm,dh2228fv";
reg = <2>;
spi-max-frequency = <100000>;
};
};
};
apbx@80040000 {
pwm: pwm@80064000 {
pinctrl-names = "default", "default";
pinctrl-1 = <&pwm3_pins_b>;
status = "okay";
};
i2c1: i2c@8005a000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
@@ -113,6 +164,19 @@
i2c@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
pca9555: pca9555@20 {
compatible = "nxp,pca9555";
interrupt-parent = <&gpio2>;
interrupts = <19 0x2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x20>;
};
};
};
@@ -153,4 +217,92 @@
status = "okay";
};
};
spi2 {
compatible = "spi-gpio";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_cfa10049>;
status = "okay";
gpio-sck = <&gpio2 16 0>;
gpio-mosi = <&gpio2 17 0>;
gpio-miso = <&gpio2 18 0>;
cs-gpios = <&gpio3 23 0>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
hx8357: hx8357@0 {
compatible = "himax,hx8357b", "himax,hx8357";
reg = <0>;
spi-max-frequency = <100000>;
spi-cpol;
spi-cpha;
gpios-reset = <&gpio3 30 0>;
im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
};
};
spi3 {
compatible = "spi-gpio";
pinctrl-names = "default";
pinctrl-0 = <&spi3_pins_cfa10049>;
status = "okay";
gpio-sck = <&gpio0 24 0>;
gpio-mosi = <&gpio0 28 0>;
cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
num-chipselects = <3>;
#address-cells = <1>;
#size-cells = <0>;
gpio5: gpio5@0 {
compatible = "fairchild,74hc595";
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
registers-number = <2>;
spi-max-frequency = <100000>;
};
gpio6: gpio6@1 {
compatible = "fairchild,74hc595";
gpio-controller;
#gpio-cells = <2>;
reg = <1>;
registers-number = <4>;
spi-max-frequency = <100000>;
};
dac0: dh2228@2 {
compatible = "rohm,dh2228fv";
reg = <2>;
spi-max-frequency = <100000>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
rotary_button {
label = "rotary_button";
gpios = <&gpio3 26 1>;
debounce-interval = <10>;
linux,code = <28>;
};
};
rotary {
compatible = "rotary-encoder";
gpios = <&gpio3 24 1>, <&gpio3 25 1>;
linux,axis = <1>; /* REL_Y */
rotary-encoder,relative-axis;
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 3 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
};

1
arch/arm/boot/dts/imx28-m28evk.dts
مشاهده پرونده

@@ -177,6 +177,7 @@
lradc@80050000 {
status = "okay";
fsl,lradc-touchscreen-wires = <4>;
};
duart: serial@80074000 {

10
arch/arm/boot/dts/imx28.dtsi
مشاهده پرونده

@@ -502,6 +502,16 @@
fsl,pull-up = <0>;
};
pwm3_pins_b: pwm3@1 {
reg = <1>;
fsl,pinmux-ids = <
0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
pwm4_pins_a: pwm4@0 {
reg = <0>;
fsl,pinmux-ids = <

30
arch/arm/boot/dts/ste-nomadik-s8815.dts Normal file
مشاهده پرونده

@@ -0,0 +1,30 @@
/*
* Device Tree for the ST-Ericsson Nomadik S8815 board
* Produced by Calao Systems
*/
/dts-v1/;
/include/ "ste-nomadik-stn8815.dtsi"
/ {
model = "Calao Systems USB-S8815";
compatible = "calaosystems,usb-s8815";
chosen {
bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
};
/* Custom board node with GPIO pins to active etc */
usb-s8815 {
/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
ethernet-gpio {
gpios = <&gpio3 19 0x1>;
interrupts = <19 0x1>;
interrupt-parent = <&gpio3>;
};
/* This will bias the MMC/SD card detect line */
mmcsd-gpio {
gpios = <&gpio3 16 0x1>;
};
};
};

256
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi Normal file
مشاهده پرونده

@@ -0,0 +1,256 @@
/*
* Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
*/
/include/ "skeleton.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
memory {
reg = <0x00000000 0x04000000>,
<0x08000000 0x04000000>;
};
L2: l2-cache {
compatible = "arm,l210-cache";
reg = <0x10210000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <30>;
cache-unified;
cache-level = <2>;
};
mtu0 {
/* Nomadik system timer */
reg = <0x101e2000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <4>;
};
mtu1 {
/* Secondary timer */
reg = <0x101e3000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <5>;
};
gpio0: gpio@101e4000 {
compatible = "st,nomadik-gpio";
reg = <0x101e4000 0x80>;
interrupt-parent = <&vica>;
interrupts = <6>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <0>;
};
gpio1: gpio@101e5000 {
compatible = "st,nomadik-gpio";
reg = <0x101e5000 0x80>;
interrupt-parent = <&vica>;
interrupts = <7>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <1>;
};
gpio2: gpio@101e6000 {
compatible = "st,nomadik-gpio";
reg = <0x101e6000 0x80>;
interrupt-parent = <&vica>;
interrupts = <8>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <2>;
};
gpio3: gpio@101e7000 {
compatible = "st,nomadik-gpio";
reg = <0x101e7000 0x80>;
interrupt-parent = <&vica>;
interrupts = <9>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <3>;
};
pinctrl {
compatible = "stericsson,nmk-pinctrl-stn8815";
};
/* A NAND flash of 128 MiB */
fsmc: flash@40000000 {
compatible = "stericsson,fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10100000 0x1000>, /* FSMC Register*/
<0x40000000 0x2000>, /* NAND Base DATA */
<0x41000000 0x2000>, /* NAND Base ADDR */
<0x40800000 0x2000>; /* NAND Base CMD */
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
status = "okay";
partition@0 {
label = "X-Loader(NAND)";
reg = <0x0 0x40000>;
};
partition@40000 {
label = "MemInit(NAND)";
reg = <0x40000 0x40000>;
};
partition@80000 {
label = "BootLoader(NAND)";
reg = <0x80000 0x200000>;
};
partition@280000 {
label = "Kernel zImage(NAND)";
reg = <0x280000 0x300000>;
};
partition@580000 {
label = "Root Filesystem(NAND)";
reg = <0x580000 0x1600000>;
};
partition@1b80000 {
label = "User Filesystem(NAND)";
reg = <0x1b80000 0x6480000>;
};
};
external-bus@34000000 {
compatible = "simple-bus";
reg = <0x34000000 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x34000000 0x1000000>;
ethernet@300 {
compatible = "smsc,lan91c111";
reg = <0x300 0x0fd00>;
};
};
/* I2C0 connected to the STw4811 power management chip */
i2c0 {
compatible = "i2c-gpio";
gpios = <&gpio1 31 0>, /* sda */
<&gpio1 30 0>; /* scl */
#address-cells = <1>;
#size-cells = <0>;
stw4811@2d {
compatible = "st,stw4811";
reg = <0x2d>;
};
};
/* I2C1 connected to various sensors */
i2c1 {
compatible = "i2c-gpio";
gpios = <&gpio1 22 0>, /* sda */
<&gpio1 21 0>; /* scl */
#address-cells = <1>;
#size-cells = <0>;
camera@2d {
compatible = "st,camera";
reg = <0x10>;
};
stw5095@1a {
compatible = "st,stw5095";
reg = <0x1a>;
};
lis3lv02dl@1d {
compatible = "st,lis3lv02dl";
reg = <0x1d>;
};
};
/* I2C2 connected to the USB portions of the STw4811 only */
i2c2 {
compatible = "i2c-gpio";
gpios = <&gpio2 10 0>, /* sda */
<&gpio2 9 0>; /* scl */
#address-cells = <1>;
#size-cells = <0>;
stw4811@2d {
compatible = "st,stw4811-usb";
reg = <0x2d>;
};
};
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
vica: intc@0x10140000 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140000 0x20>;
};
vicb: intc@0x10140020 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140020 0x20>;
};
uart0: uart@101fd000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101fd000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <12>;
};
uart1: uart@101fb000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101fb000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <17>;
};
uart2: uart@101f2000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x101f2000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <28>;
status = "disabled";
};
rng: rng@101b0000 {
compatible = "arm,primecell";
reg = <0x101b0000 0x1000>;
};
rtc: rtc@101e8000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x101e8000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <10>;
};
mmcsd: sdi@101f6000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x101f6000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <22>;
max-frequency = <48000000>;
bus-width = <4>;
mmc-cap-mmc-highspeed;
mmc-cap-sd-highspeed;
cd-gpios = <&gpio3 15 0x1>;
cd-inverted;
};
};
};

30
arch/arm/boot/dts/sun4i-a10-hackberry.dts Normal file
مشاهده پرونده

@@ -0,0 +1,30 @@
/*
* Copyright 2012 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "sun4i-a10.dtsi"
/ {
model = "Miniand Hackberry";
compatible = "miniand,hackberry", "allwinner,sun4i-a10";
chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
soc {
uart0: uart@01c28000 {
status = "okay";
};
};
};

491
arch/arm/boot/dts/tegra20-colibri-512.dtsi Normal file
مشاهده پرونده

@@ -0,0 +1,491 @@
/include/ "tegra20.dtsi"
/ {
model = "Toradex Colibri T20 512MB";
compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
memory {
reg = <0x00000000 0x20000000>;
};
host1x {
hdmi {
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&i2c_ddc>;
nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
};
};
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
audio_refclk {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
crt {
nvidia,pins = "crtp";
nvidia,function = "crt";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
displaya {
nvidia,pins = "ld0", "ld1", "ld2", "ld3",
"ld4", "ld5", "ld6", "ld7", "ld8",
"ld9", "ld10", "ld11", "ld12", "ld13",
"ld14", "ld15", "ld16", "ld17",
"lhs", "lpw0", "lpw2", "lsc0",
"lsc1", "lsck", "lsda", "lspi", "lvs";
nvidia,function = "displaya";
nvidia,tristate = <1>;
};
gpio_dte {
nvidia,pins = "dte";
nvidia,function = "rsvd1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
gpio_gmi {
nvidia,pins = "ata", "atc", "atd", "ate",
"dap1", "dap2", "dap4", "gpu", "irrx",
"irtx", "spia", "spib", "spic";
nvidia,function = "gmi";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
gpio_pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
gpio_uac {
nvidia,pins = "uac";
nvidia,function = "rsvd2";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
hdint {
nvidia,pins = "hdint";
nvidia,function = "hdmi";
nvidia,tristate = <1>;
};
i2c1 {
nvidia,pins = "rm";
nvidia,function = "i2c1";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
i2c3 {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
i2cddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
nvidia,pull = <2>;
nvidia,tristate = <1>;
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
irda {
nvidia,pins = "uad";
nvidia,function = "irda";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
nand {
nvidia,pins = "kbca", "kbcc", "kbcd",
"kbce", "kbcf";
nvidia,function = "nand";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
owc {
nvidia,pins = "owc";
nvidia,function = "owr";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
nvidia,tristate = <0>;
};
pwm {
nvidia,pins = "sdb", "sdc", "sdd";
nvidia,function = "pwm";
nvidia,tristate = <1>;
};
sdio4 {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
spi1 {
nvidia,pins = "spid", "spie", "spif";
nvidia,function = "spi1";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
spi4 {
nvidia,pins = "slxa", "slxc", "slxd", "slxk";
nvidia,function = "spi4";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
uarta {
nvidia,pins = "sdio1";
nvidia,function = "uarta";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
uartd {
nvidia,pins = "gmc";
nvidia,function = "uartd";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
ulpi {
nvidia,pins = "uaa", "uab", "uda";
nvidia,function = "ulpi";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
ulpi_refclk {
nvidia,pins = "cdev2";
nvidia,function = "pllp_out4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
usb_gpio {
nvidia,pins = "spig", "spih";
nvidia,function = "spi2_alt";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
vi {
nvidia,pins = "dta", "dtb", "dtc", "dtd";
nvidia,function = "vi";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
vi_sc {
nvidia,pins = "csus";
nvidia,function = "vi_sensor_clk";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
};
};
i2c@7000c000 {
clock-frequency = <400000>;
};
i2c_ddc: i2c@7000c400 {
clock-frequency = <100000>;
};
i2c@7000c500 {
clock-frequency = <400000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
interrupts = <0 86 0x4>;
ti,system-power-controller;
#gpio-cells = <2>;
gpio-controller;
sys-supply = <&vdd_5v0_reg>;
vin-sm0-supply = <&sys_reg>;
vin-sm1-supply = <&sys_reg>;
vin-sm2-supply = <&sys_reg>;
vinldo01-supply = <&sm2_reg>;
vinldo23-supply = <&sm2_reg>;
vinldo4-supply = <&sm2_reg>;
vinldo678-supply = <&sm2_reg>;
vinldo9-supply = <&sm2_reg>;
regulators {
#address-cells = <1>;
#size-cells = <0>;
sys_reg: regulator@0 {
reg = <0>;
regulator-compatible = "sys";
regulator-name = "vdd_sys";
regulator-always-on;
};
regulator@1 {
reg = <1>;
regulator-compatible = "sm0";
regulator-name = "vdd_sm0,vdd_core";
regulator-min-microvolt = <1275000>;
regulator-max-microvolt = <1275000>;
regulator-always-on;
};
regulator@2 {
reg = <2>;
regulator-compatible = "sm1";
regulator-name = "vdd_sm1,vdd_cpu";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
sm2_reg: regulator@3 {
reg = <3>;
regulator-compatible = "sm2";
regulator-name = "vdd_sm2,vin_ldo*";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
};
/* LDO0 is not connected to anything */
regulator@5 {
reg = <5>;
regulator-compatible = "ldo1";
regulator-name = "vdd_ldo1,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
regulator@6 {
reg = <6>;
regulator-compatible = "ldo2";
regulator-name = "vdd_ldo2,vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
/* LDO3 is not connected to anything */
regulator@8 {
reg = <8>;
regulator-compatible = "ldo4";
regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo5_reg: regulator@9 {
reg = <9>;
regulator-compatible = "ldo5";
regulator-name = "vdd_ldo5,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
regulator@10 {
reg = <10>;
regulator-compatible = "ldo6";
regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
hdmi_vdd_reg: regulator@11 {
reg = <11>;
regulator-compatible = "ldo7";
regulator-name = "vdd_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
hdmi_pll_reg: regulator@12 {
reg = <12>;
regulator-compatible = "ldo8";
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
regulator@13 {
reg = <13>;
regulator-compatible = "ldo9";
regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
regulator@14 {
reg = <14>;
regulator-compatible = "ldo_rtc";
regulator-name = "vdd_rtc_out,vdd_cell";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
temperature-sensor@4c {
compatible = "national,lm95245";
reg = <0x4c>;
};
};
memory-controller@7000f400 {
emc-table@83250 {
reg = <83250>;
compatible = "nvidia,tegra20-emc-table";
clock-frequency = <83250>;
nvidia,emc-registers = <0x00000005 0x00000011
0x00000004 0x00000002 0x00000004 0x00000004
0x00000001 0x0000000a 0x00000002 0x00000002
0x00000001 0x00000001 0x00000003 0x00000004
0x00000003 0x00000009 0x0000000c 0x0000025f
0x00000000 0x00000003 0x00000003 0x00000002
0x00000002 0x00000001 0x00000008 0x000000c8
0x00000003 0x00000005 0x00000003 0x0000000c
0x00000002 0x00000000 0x00000000 0x00000002
0x00000000 0x00000000 0x00000083 0x00520006
0x00000010 0x00000008 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000>;
};
emc-table@133200 {
reg = <133200>;
compatible = "nvidia,tegra20-emc-table";
clock-frequency = <133200>;
nvidia,emc-registers = <0x00000008 0x00000019
0x00000006 0x00000002 0x00000004 0x00000004
0x00000001 0x0000000a 0x00000002 0x00000002
0x00000002 0x00000001 0x00000003 0x00000004
0x00000003 0x00000009 0x0000000c 0x0000039f
0x00000000 0x00000003 0x00000003 0x00000002
0x00000002 0x00000001 0x00000008 0x000000c8
0x00000003 0x00000007 0x00000003 0x0000000c
0x00000002 0x00000000 0x00000000 0x00000002
0x00000000 0x00000000 0x00000083 0x00510006
0x00000010 0x00000008 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000>;
};
emc-table@166500 {
reg = <166500>;
compatible = "nvidia,tegra20-emc-table";
clock-frequency = <166500>;
nvidia,emc-registers = <0x0000000a 0x00000021
0x00000008 0x00000003 0x00000004 0x00000004
0x00000002 0x0000000a 0x00000003 0x00000003
0x00000002 0x00000001 0x00000003 0x00000004
0x00000003 0x00000009 0x0000000c 0x000004df
0x00000000 0x00000003 0x00000003 0x00000003
0x00000003 0x00000001 0x00000009 0x000000c8
0x00000003 0x00000009 0x00000004 0x0000000c
0x00000002 0x00000000 0x00000000 0x00000002
0x00000000 0x00000000 0x00000083 0x004f0006
0x00000010 0x00000008 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000>;
};
emc-table@333000 {
reg = <333000>;
compatible = "nvidia,tegra20-emc-table";
clock-frequency = <333000>;
nvidia,emc-registers = <0x00000014 0x00000041
0x0000000f 0x00000005 0x00000004 0x00000005
0x00000003 0x0000000a 0x00000005 0x00000005
0x00000004 0x00000001 0x00000003 0x00000004
0x00000003 0x00000009 0x0000000c 0x000009ff
0x00000000 0x00000003 0x00000003 0x00000005
0x00000005 0x00000001 0x0000000e 0x000000c8
0x00000003 0x00000011 0x00000006 0x0000000c
0x00000002 0x00000000 0x00000000 0x00000002
0x00000000 0x00000000 0x00000083 0x00380006
0x00000010 0x00000008 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000>;
};
};
ac97: ac97 {
status = "okay";
nvidia,codec-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
nvidia,codec-sync-gpio = <&gpio 120 0>; /* gpio PP0 */
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000600 {
cd-gpios = <&gpio 23 0>; /* gpio PC7 */
};
sound {
compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
"nvidia,tegra-audio-wm9712";
nvidia,model = "Colibri T20 AC97 Audio";
nvidia,audio-routing =
"Headphone", "HPOUTL",
"Headphone", "HPOUTR",
"LineIn", "LINEINL",
"LineIn", "LINEINR",
"Mic", "MIC1";
nvidia,ac97-controller = <&ac97>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd_5v0_reg: regulator@100 {
compatible = "regulator-fixed";
reg = <100>;
regulator-name = "vdd_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
regulator@101 {
compatible = "regulator-fixed";
reg = <101>;
regulator-name = "internal_usb";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
gpio = <&gpio 217 0>;
};
};
};

120
arch/arm/boot/dts/tegra20-harmony.dts
مشاهده پرونده

@@ -3,7 +3,7 @@
/include/ "tegra20.dtsi"
/ {
model = "NVIDIA Tegra2 Harmony evaluation board";
model = "NVIDIA Tegra20 Harmony evaluation board";
compatible = "nvidia,harmony", "nvidia,tegra20";
memory {
@@ -252,7 +252,6 @@
serial@70006300 {
status = "okay";
clock-frequency = <216000000>;
};
i2c@7000c000 {
@@ -452,6 +451,123 @@
bus-width = <8>;
};
kbc {
status = "okay";
nvidia,debounce-delay-ms = <2>;
nvidia,repeat-delay-ms = <160>;
nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
linux,keymap = <0x00020011 /* KEY_W */
0x0003001F /* KEY_S */
0x0004001E /* KEY_A */
0x0005002C /* KEY_Z */
0x000701D0 /* KEY_FN */
0x0107008B /* KEY_MENU */
0x02060038 /* KEY_LEFTALT */
0x02070064 /* KEY_RIGHTALT */
0x03000006 /* KEY_5 */
0x03010005 /* KEY_4 */
0x03020013 /* KEY_R */
0x03030012 /* KEY_E */
0x03040021 /* KEY_F */
0x03050020 /* KEY_D */
0x0306002D /* KEY_X */
0x04000008 /* KEY_7 */
0x04010007 /* KEY_6 */
0x04020014 /* KEY_T */
0x04030023 /* KEY_H */
0x04040022 /* KEY_G */
0x0405002F /* KEY_V */
0x0406002E /* KEY_C */
0x04070039 /* KEY_SPACE */
0x0500000A /* KEY_9 */
0x05010009 /* KEY_8 */
0x05020016 /* KEY_U */
0x05030015 /* KEY_Y */
0x05040024 /* KEY_J */
0x05050031 /* KEY_N */
0x05060030 /* KEY_B */
0x0507002B /* KEY_BACKSLASH */
0x0600000C /* KEY_MINUS */
0x0601000B /* KEY_0 */
0x06020018 /* KEY_O */
0x06030017 /* KEY_I */
0x06040026 /* KEY_L */
0x06050025 /* KEY_K */
0x06060033 /* KEY_COMMA */
0x06070032 /* KEY_M */
0x0701000D /* KEY_EQUAL */
0x0702001B /* KEY_RIGHTBRACE */
0x0703001C /* KEY_ENTER */
0x0707008B /* KEY_MENU */
0x0804002A /* KEY_LEFTSHIFT */
0x08050036 /* KEY_RIGHTSHIFT */
0x0905001D /* KEY_LEFTCTRL */
0x09070061 /* KEY_RIGHTCTRL */
0x0B00001A /* KEY_LEFTBRACE */
0x0B010019 /* KEY_P */
0x0B020028 /* KEY_APOSTROPHE */
0x0B030027 /* KEY_SEMICOLON */
0x0B040035 /* KEY_SLASH */
0x0B050034 /* KEY_DOT */
0x0C000044 /* KEY_F10 */
0x0C010043 /* KEY_F9 */
0x0C02000E /* KEY_BACKSPACE */
0x0C030004 /* KEY_3 */
0x0C040003 /* KEY_2 */
0x0C050067 /* KEY_UP */
0x0C0600D2 /* KEY_PRINT */
0x0C070077 /* KEY_PAUSE */
0x0D00006E /* KEY_INSERT */
0x0D01006F /* KEY_DELETE */
0x0D030068 /* KEY_PAGEUP */
0x0D04006D /* KEY_PAGEDOWN */
0x0D05006A /* KEY_RIGHT */
0x0D06006C /* KEY_DOWN */
0x0D070069 /* KEY_LEFT */
0x0E000057 /* KEY_F11 */
0x0E010058 /* KEY_F12 */
0x0E020042 /* KEY_F8 */
0x0E030010 /* KEY_Q */
0x0E04003E /* KEY_F4 */
0x0E05003D /* KEY_F3 */
0x0E060002 /* KEY_1 */
0x0E070041 /* KEY_F7 */
0x0F000001 /* KEY_ESC */
0x0F010029 /* KEY_GRAVE */
0x0F02003F /* KEY_F5 */
0x0F03000F /* KEY_TAB */
0x0F04003B /* KEY_F1 */
0x0F05003C /* KEY_F2 */
0x0F06003A /* KEY_CAPSLOCK */
0x0F070040 /* KEY_F6 */
0x14000047 /* KEY_KP7 */
0x15000049 /* KEY_KP9 */
0x15010048 /* KEY_KP8 */
0x1502004B /* KEY_KP4 */
0x1504004F /* KEY_KP1 */
0x1601004E /* KEY_KPSLASH */
0x1602004D /* KEY_KP6 */
0x1603004C /* KEY_KP5 */
0x16040051 /* KEY_KP3 */
0x16050050 /* KEY_KP2 */
0x16070052 /* KEY_KP0 */
0x1B010037 /* KEY_KPASTERISK */
0x1B03004A /* KEY_KPMINUS */
0x1B04004E /* KEY_KPPLUS */
0x1B050053 /* KEY_KPDOT */
0x1C050073 /* KEY_VOLUMEUP */
0x1D030066 /* KEY_HOME */
0x1D04006B /* KEY_END */
0x1D0500E1 /* KEY_BRIGHTNESSUP */
0x1D060072 /* KEY_VOLUMEDOWN */
0x1D0700E0 /* KEY_BRIGHTNESSDOWN */
0x1E000045 /* KEY_NUMLOCK */
0x1E010046 /* KEY_SCROLLLOCK */
0x1E020071 /* KEY_MUTE */
0x1F0400D6>; /* KEY_QUESTION */
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;

89
arch/arm/boot/dts/tegra20-iris-512.dts Normal file
مشاهده پرونده

@@ -0,0 +1,89 @@
/dts-v1/;
/include/ "tegra20-colibri-512.dtsi"
/ {
model = "Toradex Colibri T20 512MB on Iris";
compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
host1x {
hdmi {
status = "okay";
};
};
pinmux {
state_default: pinmux {
hdint {
nvidia,tristate = <0>;
};
i2cddc {
nvidia,tristate = <0>;
};
sdio4 {
nvidia,tristate = <0>;
};
uarta {
nvidia,tristate = <0>;
};
uartd {
nvidia,tristate = <0>;
};
};
};
usb@c5000000 {
status = "okay";
dr_mode = "otg";
};
usb@c5008000 {
status = "okay";
};
serial@70006000 {
status = "okay";
};
serial@70006300 {
status = "okay";
};
i2c_ddc: i2c@7000c400 {
status = "okay";
};
sdhci@c8000600 {
status = "okay";
bus-width = <4>;
vmmc-supply = <&vcc_sd_reg>;
vqmmc-supply = <&vcc_sd_reg>;
};
regulators {
regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb_host_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
gpio = <&gpio 178 0>;
};
vcc_sd_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};

22
arch/arm/boot/dts/tegra20-paz00.dts
مشاهده پرونده

@@ -10,6 +10,18 @@
reg = <0x00000000 0x20000000>;
};
host1x {
hdmi {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
};
};
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -232,12 +244,10 @@
serial@70006000 {
status = "okay";
clock-frequency = <216000000>;
};
serial@70006200 {
status = "okay";
clock-frequency = <216000000>;
};
i2c@7000c000 {
@@ -252,9 +262,9 @@
};
};
i2c@7000c400 {
hdmi_ddc: i2c@7000c400 {
status = "okay";
clock-frequency = <400000>;
clock-frequency = <100000>;
};
nvec {
@@ -369,13 +379,13 @@
regulator-max-microvolt = <1800000>;
};
ldo7 {
hdmi_vdd_reg: ldo7 {
regulator-name = "+3.3vs_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo8 {
hdmi_pll_reg: ldo8 {
regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;

158
arch/arm/boot/dts/tegra20-seaboard.dts
مشاهده پرونده

@@ -10,6 +10,18 @@
reg = <0x00000000 0x40000000>;
};
host1x {
hdmi {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
};
};
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -291,7 +303,6 @@
serial@70006300 {
status = "okay";
clock-frequency = <216000000>;
};
i2c@7000c000 {
@@ -345,7 +356,7 @@
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
i2c@0 {
hdmi_ddc: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -463,13 +474,13 @@
regulator-max-microvolt = <1800000>;
};
ldo7 {
hdmi_vdd_reg: ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo8 {
hdmi_pll_reg: ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -604,6 +615,145 @@
};
};
kbc {
status = "okay";
nvidia,debounce-delay-ms = <32>;
nvidia,repeat-delay-ms = <160>;
nvidia,ghost-filter;
nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
linux,keymap = <0x00020011 /* KEY_W */
0x0003001F /* KEY_S */
0x0004001E /* KEY_A */
0x0005002C /* KEY_Z */
0x000701d0 /* KEY_FN */
0x0107007D /* KEY_LEFTMETA */
0x02060064 /* KEY_RIGHTALT */
0x02070038 /* KEY_LEFTALT */
0x03000006 /* KEY_5 */
0x03010005 /* KEY_4 */
0x03020013 /* KEY_R */
0x03030012 /* KEY_E */
0x03040021 /* KEY_F */
0x03050020 /* KEY_D */
0x0306002D /* KEY_X */
0x04000008 /* KEY_7 */
0x04010007 /* KEY_6 */
0x04020014 /* KEY_T */
0x04030023 /* KEY_H */
0x04040022 /* KEY_G */
0x0405002F /* KEY_V */
0x0406002E /* KEY_C */
0x04070039 /* KEY_SPACE */
0x0500000A /* KEY_9 */
0x05010009 /* KEY_8 */
0x05020016 /* KEY_U */
0x05030015 /* KEY_Y */
0x05040024 /* KEY_J */
0x05050031 /* KEY_N */
0x05060030 /* KEY_B */
0x0507002B /* KEY_BACKSLASH */
0x0600000C /* KEY_MINUS */
0x0601000B /* KEY_0 */
0x06020018 /* KEY_O */
0x06030017 /* KEY_I */
0x06040026 /* KEY_L */
0x06050025 /* KEY_K */
0x06060033 /* KEY_COMMA */
0x06070032 /* KEY_M */
0x0701000D /* KEY_EQUAL */
0x0702001B /* KEY_RIGHTBRACE */
0x0703001C /* KEY_ENTER */
0x0707008B /* KEY_MENU */
0x08040036 /* KEY_RIGHTSHIFT */
0x0805002A /* KEY_LEFTSHIFT */
0x09050061 /* KEY_RIGHTCTRL */
0x0907001D /* KEY_LEFTCTRL */
0x0B00001A /* KEY_LEFTBRACE */
0x0B010019 /* KEY_P */
0x0B020028 /* KEY_APOSTROPHE */
0x0B030027 /* KEY_SEMICOLON */
0x0B040035 /* KEY_SLASH */
0x0B050034 /* KEY_DOT */
0x0C000044 /* KEY_F10 */
0x0C010043 /* KEY_F9 */
0x0C02000E /* KEY_BACKSPACE */
0x0C030004 /* KEY_3 */
0x0C040003 /* KEY_2 */
0x0C050067 /* KEY_UP */
0x0C0600D2 /* KEY_PRINT */
0x0C070077 /* KEY_PAUSE */
0x0D00006E /* KEY_INSERT */
0x0D01006F /* KEY_DELETE */
0x0D030068 /* KEY_PAGEUP */
0x0D04006D /* KEY_PAGEDOWN */
0x0D05006A /* KEY_RIGHT */
0x0D06006C /* KEY_DOWN */
0x0D070069 /* KEY_LEFT */
0x0E000057 /* KEY_F11 */
0x0E010058 /* KEY_F12 */
0x0E020042 /* KEY_F8 */
0x0E030010 /* KEY_Q */
0x0E04003E /* KEY_F4 */
0x0E05003D /* KEY_F3 */
0x0E060002 /* KEY_1 */
0x0E070041 /* KEY_F7 */
0x0F000001 /* KEY_ESC */
0x0F010029 /* KEY_GRAVE */
0x0F02003F /* KEY_F5 */
0x0F03000F /* KEY_TAB */
0x0F04003B /* KEY_F1 */
0x0F05003C /* KEY_F2 */
0x0F06003A /* KEY_CAPSLOCK */
0x0F070040 /* KEY_F6 */
/* Software Handled Function Keys */
0x14000047 /* KEY_KP7 */
0x15000049 /* KEY_KP9 */
0x15010048 /* KEY_KP8 */
0x1502004B /* KEY_KP4 */
0x1504004F /* KEY_KP1 */
0x1601004E /* KEY_KPSLASH */
0x1602004D /* KEY_KP6 */
0x1603004C /* KEY_KP5 */
0x16040051 /* KEY_KP3 */
0x16050050 /* KEY_KP2 */
0x16070052 /* KEY_KP0 */
0x1B010037 /* KEY_KPASTERISK */
0x1B03004A /* KEY_KPMINUS */
0x1B04004E /* KEY_KPPLUS */
0x1B050053 /* KEY_KPDOT */
0x1C050073 /* KEY_VOLUMEUP */
0x1D030066 /* KEY_HOME */
0x1D04006B /* KEY_END */
0x1D0500E0 /* KEY_BRIGHTNESSDOWN */
0x1D060072 /* KEY_VOLUMEDOWN */
0x1D0700E1 /* KEY_BRIGHTNESSUP */
0x1E000045 /* KEY_NUMLOCK */
0x1E010046 /* KEY_SCROLLLOCK */
0x1E020071 /* KEY_MUTE */
0x1F04008A>; /* KEY_HELP */
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;

1
arch/arm/boot/dts/tegra20-tamonten.dtsi
مشاهده پرونده

@@ -276,7 +276,6 @@
};
serial@70006300 {
clock-frequency = <216000000>;
status = "okay";
};

11
arch/arm/boot/dts/tegra20-trimslice.dts
مشاهده پرونده

@@ -249,6 +249,11 @@
"ld23_22";
nvidia,pull = <1>;
};
conf_spif {
nvidia,pins = "spif";
nvidia,pull = <1>;
nvidia,tristate = <0>;
};
};
};
@@ -258,7 +263,6 @@
serial@70006000 {
status = "okay";
clock-frequency = <216000000>;
};
dvi_ddc: i2c@7000c000 {
@@ -326,6 +330,11 @@
bus-width = <4>;
};
poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio 191 1>; /* gpio PX7, active low */
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;

23
arch/arm/boot/dts/tegra20-ventana.dts
مشاهده پرونده

@@ -3,13 +3,25 @@
/include/ "tegra20.dtsi"
/ {
model = "NVIDIA Tegra2 Ventana evaluation board";
model = "NVIDIA Tegra20 Ventana evaluation board";
compatible = "nvidia,ventana", "nvidia,tegra20";
memory {
reg = <0x00000000 0x40000000>;
};
host1x {
hdmi {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
};
};
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -288,7 +300,6 @@
serial@70006300 {
status = "okay";
clock-frequency = <216000000>;
};
i2c@7000c000 {
@@ -320,7 +331,7 @@
i2c@7000c400 {
status = "okay";
clock-frequency = <400000>;
clock-frequency = <100000>;
};
i2cmux {
@@ -335,7 +346,7 @@
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
i2c@0 {
hdmi_ddc: i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -446,13 +457,13 @@
regulator-max-microvolt = <1800000>;
};
ldo7 {
hdmi_vdd_reg: ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo8 {
hdmi_pll_reg: ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;

15
arch/arm/boot/dts/tegra20-whistler.dts
مشاهده پرونده

@@ -3,7 +3,7 @@
/include/ "tegra20.dtsi"
/ {
model = "NVIDIA Tegra2 Whistler evaluation board";
model = "NVIDIA Tegra20 Whistler evaluation board";
compatible = "nvidia,whistler", "nvidia,tegra20";
memory {
@@ -255,7 +255,6 @@
serial@70006000 {
status = "okay";
clock-frequency = <216000000>;
};
hdmi_ddc: i2c@7000c400 {
@@ -520,6 +519,18 @@
bus-width = <8>;
};
kbc {
status = "okay";
nvidia,debounce-delay-ms = <20>;
nvidia,repeat-delay-ms = <160>;
nvidia,kbc-row-pins = <0 1 2>;
nvidia,kbc-col-pins = <16 17>;
linux,keymap = <0x00000074 /* KEY_POWER */
0x01000066 /* KEY_HOME */
0x0101009E /* KEY_BACK */
0x0201008B>; /* KEY_MENU */
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;

67
arch/arm/boot/dts/tegra20.dtsi
مشاهده پرونده

@@ -4,6 +4,14 @@
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
aliases {
serial0 = &uarta;
serial1 = &uartb;
serial2 = &uartc;
serial3 = &uartd;
serial4 = &uarte;
};
host1x {
compatible = "nvidia,tegra20-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
@@ -112,15 +120,6 @@
interrupts = <1 13 0x304>;
};
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
arm,data-latency = <5 5 2>;
arm,tag-latency = <4 4 2>;
cache-unified;
cache-level = <2>;
};
intc: interrupt-controller {
compatible = "arm,cortex-a9-gic";
reg = <0x50041000 0x1000
@@ -129,6 +128,15 @@
#interrupt-cells = <3>;
};
cache-controller {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
arm,data-latency = <5 5 2>;
arm,tag-latency = <4 4 2>;
cache-unified;
cache-level = <2>;
};
timer@60005000 {
compatible = "nvidia,tegra20-timer";
reg = <0x60005000 0x60>;
@@ -199,6 +207,15 @@
compatible = "nvidia,tegra20-das";
reg = <0x70000c00 0x80>;
};
tegra_ac97: ac97 {
compatible = "nvidia,tegra20-ac97";
reg = <0x70002000 0x200>;
interrupts = <0 81 0x04>;
nvidia,dma-request-selector = <&apbdma 12>;
clocks = <&tegra_car 3>;
status = "disabled";
};
tegra_i2s1: i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
@@ -218,47 +235,59 @@
status = "disabled";
};
serial@70006000 {
/*
* There are two serial driver i.e. 8250 based simple serial
* driver and APB DMA based serial driver for higher baudrate
* and performace. To enable the 8250 based driver, the compatible
* is "nvidia,tegra20-uart" and to enable the APB DMA based serial
* driver, the comptible is "nvidia,tegra20-hsuart".
*/
uarta: serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car 6>;
status = "disabled";
};
serial@70006040 {
uartb: serial@70006040 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
nvidia,dma-request-selector = <&apbdma 9>;
clocks = <&tegra_car 96>;
status = "disabled";
};
serial@70006200 {
uartc: serial@70006200 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
nvidia,dma-request-selector = <&apbdma 10>;
clocks = <&tegra_car 55>;
status = "disabled";
};
serial@70006300 {
uartd: serial@70006300 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
nvidia,dma-request-selector = <&apbdma 19>;
clocks = <&tegra_car 65>;
status = "disabled";
};
serial@70006400 {
uarte: serial@70006400 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
nvidia,dma-request-selector = <&apbdma 20>;
clocks = <&tegra_car 66>;
status = "disabled";
};
@@ -375,6 +404,14 @@
status = "disabled";
};
kbc {
compatible = "nvidia,tegra20-kbc";
reg = <0x7000e200 0x100>;
interrupts = <0 85 0x04>;
clocks = <&tegra_car 36>;
status = "disabled";
};
pmc {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
@@ -387,7 +424,7 @@
interrupts = <0 77 0x04>;
};
gart {
iommu {
compatible = "nvidia,tegra20-gart";
reg = <0x7000f024 0x00000018 /* controller registers */
0x58000000 0x02000000>; /* GART aperture */

373
arch/arm/boot/dts/tegra30-beaver.dts Normal file
مشاهده پرونده

@@ -0,0 +1,373 @@
/dts-v1/;
/include/ "tegra30.dtsi"
/ {
model = "NVIDIA Tegra30 Beaver evaluation board";
compatible = "nvidia,beaver", "nvidia,tegra30";
memory {
reg = <0x80000000 0x80000000>;
};
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
sdmmc1_clk_pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
"sdmmc1_dat0_py7",
"sdmmc1_dat1_py6",
"sdmmc1_dat2_py5",
"sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
sdmmc3_clk_pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
sdmmc3_cmd_pa7 {
nvidia,pins = "sdmmc3_cmd_pa7",
"sdmmc3_dat0_pb7",
"sdmmc3_dat1_pb6",
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
sdmmc4_dat0_paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
"sdmmc4_dat3_paa3",
"sdmmc4_dat4_paa4",
"sdmmc4_dat5_paa5",
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
dap2_fs_pa2 {
nvidia,pins = "dap2_fs_pa2",
"dap2_sclk_pa3",
"dap2_din_pa4",
"dap2_dout_pa5";
nvidia,function = "i2s1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
sdio3 {
nvidia,pins = "drive_sdio3";
nvidia,high-speed-mode = <0>;
nvidia,schmitt = <0>;
nvidia,pull-down-strength = <46>;
nvidia,pull-up-strength = <42>;
nvidia,slew-rate-rising = <1>;
nvidia,slew-rate-falling = <1>;
};
};
};
serial@70006000 {
status = "okay";
};
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c500 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
tps62361 {
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
ti,vsel0-state-high;
ti,vsel1-state-high;
};
pmic: tps65911@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
interrupts = <0 86 0x4>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
#gpio-cells = <2>;
gpio-controller;
vcc1-supply = <&vdd_5v_in_reg>;
vcc2-supply = <&vdd_5v_in_reg>;
vcc3-supply = <&vio_reg>;
vcc4-supply = <&vdd_5v_in_reg>;
vcc5-supply = <&vdd_5v_in_reg>;
vcc6-supply = <&vdd2_reg>;
vcc7-supply = <&vdd_5v_in_reg>;
vccio-supply = <&vdd_5v_in_reg>;
regulators {
#address-cells = <1>;
#size-cells = <0>;
vdd1_reg: vdd1 {
regulator-name = "vddio_ddr_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vdd2_reg: vdd2 {
regulator-name = "vdd_1v5_gen";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vddctrl_reg: vddctrl {
regulator-name = "vdd_cpu,vdd_sys";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vio_reg: vio {
regulator-name = "vdd_1v8_gen";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo1_reg: ldo1 {
regulator-name = "vdd_pexa,vdd_pexb";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
ldo2_reg: ldo2 {
regulator-name = "vdd_sata,avdd_plle";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
/* LDO3 is not connected to anything */
ldo4_reg: ldo4 {
regulator-name = "vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ldo5_reg: ldo5 {
regulator-name = "vddio_sdmmc,avdd_vdac";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo6_reg: ldo6 {
regulator-name = "avdd_dsi_csi,pwrdet_mipi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo7_reg: ldo7 {
regulator-name = "vdd_pllm,x,u,a_p_c_s";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ldo8_reg: ldo8 {
regulator-name = "vdd_ddr_hs";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
};
};
};
spi@7000da00 {
status = "okay";
spi-max-frequency = <25000000>;
spi-flash@1 {
compatible = "winbond,w25q32";
reg = <1>;
spi-max-frequency = <20000000>;
};
};
ahub {
i2s@70080400 {
status = "okay";
};
};
pmc {
status = "okay";
nvidia,invert-interrupt;
};
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
};
sdhci@78000600 {
status = "okay";
bus-width = <8>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd_5v_in_reg: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vdd_5v_in";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
chargepump_5v_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "chargepump_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
enable-active-high;
gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */
};
ddr_reg: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "vdd_ddr";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&pmic 7 0>; /* PMIC TPS65911 GPIO7 */
vin-supply = <&vdd_5v_in_reg>;
};
vdd_5v_sata_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "vdd_5v_sata";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio 30 0>; /* gpio PD6 */
vin-supply = <&vdd_5v_in_reg>;
};
usb1_vbus_reg: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio 68 0>; /* GPIO PI4 */
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
usb3_vbus_reg: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "usb3_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio 63 0>; /* GPIO PH7 */
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
sys_3v3_reg: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "sys_3v3,vdd_3v3_alw";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&pmic 6 0>; /* PMIC TPS65911 GPIO6 */
vin-supply = <&vdd_5v_in_reg>;
};
sys_3v3_pexs_reg: regulator@7 {
compatible = "regulator-fixed";
reg = <7>;
regulator-name = "sys_3v3_pexs";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio 95 0>; /* gpio PL7 */
vin-supply = <&sys_3v3_reg>;
};
};
};

15
arch/arm/boot/dts/tegra30-cardhu.dtsi
مشاهده پرونده

@@ -106,12 +106,25 @@
nvidia,slew-rate-rising = <1>;
nvidia,slew-rate-falling = <1>;
};
uart3_txd_pw6 {
nvidia,pins = "uart3_txd_pw6",
"uart3_cts_n_pa1",
"uart3_rts_n_pc0",
"uart3_rxd_pw7";
nvidia,function = "uartc";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
};
};
serial@70006000 {
status = "okay";
clock-frequency = <408000000>;
};
serial@70006200 {
compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
i2c@7000c000 {

61
arch/arm/boot/dts/tegra30.dtsi
مشاهده پرونده

@@ -4,6 +4,14 @@
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
aliases {
serial0 = &uarta;
serial1 = &uartb;
serial2 = &uartc;
serial3 = &uartd;
serial4 = &uarte;
};
host1x {
compatible = "nvidia,tegra30-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
@@ -113,15 +121,6 @@
interrupts = <1 13 0xf04>;
};
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
arm,data-latency = <6 6 2>;
arm,tag-latency = <5 5 2>;
cache-unified;
cache-level = <2>;
};
intc: interrupt-controller {
compatible = "arm,cortex-a9-gic";
reg = <0x50041000 0x1000
@@ -130,6 +129,15 @@
#interrupt-cells = <3>;
};
cache-controller {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
arm,data-latency = <6 6 2>;
arm,tag-latency = <5 5 2>;
cache-unified;
cache-level = <2>;
};
timer@60005000 {
compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
reg = <0x60005000 0x400>;
@@ -191,7 +199,7 @@
};
gpio: gpio {
compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
compatible = "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
interrupts = <0 32 0x04
0 33 0x04
@@ -213,47 +221,60 @@
0x70003000 0x3e4>; /* Mux registers */
};
serial@70006000 {
/*
* There are two serial driver i.e. 8250 based simple serial
* driver and APB DMA based serial driver for higher baudrate
* and performace. To enable the 8250 based driver, the compatible
* is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable
* the APB DMA based serial driver, the comptible is
* "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
*/
uarta: serial@70006000 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car 6>;
status = "disabled";
};
serial@70006040 {
uartb: serial@70006040 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
nvidia,dma-request-selector = <&apbdma 9>;
clocks = <&tegra_car 160>;
status = "disabled";
};
serial@70006200 {
uartc: serial@70006200 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
nvidia,dma-request-selector = <&apbdma 10>;
clocks = <&tegra_car 55>;
status = "disabled";
};
serial@70006300 {
uartd: serial@70006300 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
nvidia,dma-request-selector = <&apbdma 19>;
clocks = <&tegra_car 65>;
status = "disabled";
};
serial@70006400 {
uarte: serial@70006400 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
nvidia,dma-request-selector = <&apbdma 20>;
clocks = <&tegra_car 66>;
status = "disabled";
};
@@ -392,6 +413,14 @@
status = "disabled";
};
kbc {
compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
reg = <0x7000e200 0x100>;
interrupts = <0 85 0x04>;
clocks = <&tegra_car 36>;
status = "disabled";
};
pmc {
compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
@@ -406,7 +435,7 @@
interrupts = <0 77 0x04>;
};
smmu {
iommu {
compatible = "nvidia,tegra30-smmu";
reg = <0x7000f010 0x02c
0x7000f1f0 0x010