arch/tile: parameterize system PLs to support KVM port

While not a port to KVM (yet), this change modifies the kernel to be able to build either at PL1 or at PL2 with a suitable config switch. Pushing up this change avoids handling branch merge issues going forward with the KVM work. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-14 16:23:03 -04:00
--- a/arch/tile/include/arch/spr_def.h
+++ b/arch/tile/include/arch/spr_def.h
@@ -12,8 +12,93 @@
 *   more details.
 */

+/*
+ * In addition to including the proper base SPR definition file, depending
+ * on machine architecture, this file defines several macros which allow
+ * kernel code to use protection-level dependent SPRs without worrying
+ * about which PL it's running at.  In these macros, the PL that the SPR
+ * or interrupt number applies to is replaced by K.
+ */
+
+#if CONFIG_KERNEL_PL != 1 && CONFIG_KERNEL_PL != 2
+#error CONFIG_KERNEL_PL must be 1 or 2
+#endif
+
+/* Concatenate 4 strings. */
+#define __concat4(a, b, c, d) a ## b ## c ## d
+#define _concat4(a, b, c, d)  __concat4(a, b, c, d)
+
 #ifdef __tilegx__
 #include <arch/spr_def_64.h>
+
+/* TILE-Gx dependent, protection-level dependent SPRs. */
+
+#define SPR_INTERRUPT_MASK_K \
+	_concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL,,)
+#define SPR_INTERRUPT_MASK_SET_K \
+	_concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL,,)
+#define SPR_INTERRUPT_MASK_RESET_K \
+	_concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL,,)
+#define SPR_INTERRUPT_VECTOR_BASE_K \
+	_concat4(SPR_INTERRUPT_VECTOR_BASE_, CONFIG_KERNEL_PL,,)
+
+#define SPR_IPI_MASK_K \
+	_concat4(SPR_IPI_MASK_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_MASK_RESET_K \
+	_concat4(SPR_IPI_MASK_RESET_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_MASK_SET_K \
+	_concat4(SPR_IPI_MASK_SET_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_EVENT_K \
+	_concat4(SPR_IPI_EVENT_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_EVENT_RESET_K \
+	_concat4(SPR_IPI_EVENT_RESET_, CONFIG_KERNEL_PL,,)
+#define SPR_IPI_MASK_SET_K \
+	_concat4(SPR_IPI_MASK_SET_, CONFIG_KERNEL_PL,,)
+#define INT_IPI_K \
+	_concat4(INT_IPI_, CONFIG_KERNEL_PL,,)
+
+#define SPR_SINGLE_STEP_CONTROL_K \
+	_concat4(SPR_SINGLE_STEP_CONTROL_, CONFIG_KERNEL_PL,,)
+#define SPR_SINGLE_STEP_EN_K_K \
+	_concat4(SPR_SINGLE_STEP_EN_, CONFIG_KERNEL_PL, _, CONFIG_KERNEL_PL)
+#define INT_SINGLE_STEP_K \
+	_concat4(INT_SINGLE_STEP_, CONFIG_KERNEL_PL,,)
+
 #else
 #include <arch/spr_def_32.h>
+
+/* TILEPro dependent, protection-level dependent SPRs. */
+
+#define SPR_INTERRUPT_MASK_K_0 \
+	_concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL, _0,)
+#define SPR_INTERRUPT_MASK_K_1 \
+	_concat4(SPR_INTERRUPT_MASK_, CONFIG_KERNEL_PL, _1,)
+#define SPR_INTERRUPT_MASK_SET_K_0 \
+	_concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL, _0,)
+#define SPR_INTERRUPT_MASK_SET_K_1 \
+	_concat4(SPR_INTERRUPT_MASK_SET_, CONFIG_KERNEL_PL, _1,)
+#define SPR_INTERRUPT_MASK_RESET_K_0 \
+	_concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL, _0,)
+#define SPR_INTERRUPT_MASK_RESET_K_1 \
+	_concat4(SPR_INTERRUPT_MASK_RESET_, CONFIG_KERNEL_PL, _1,)
+
 #endif
+
+/* Generic protection-level dependent SPRs. */
+
+#define SPR_SYSTEM_SAVE_K_0 \
+	_concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _0,)
+#define SPR_SYSTEM_SAVE_K_1 \
+	_concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _1,)
+#define SPR_SYSTEM_SAVE_K_2 \
+	_concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _2,)
+#define SPR_SYSTEM_SAVE_K_3 \
+	_concat4(SPR_SYSTEM_SAVE_, CONFIG_KERNEL_PL, _3,)
+#define SPR_EX_CONTEXT_K_0 \
+	_concat4(SPR_EX_CONTEXT_, CONFIG_KERNEL_PL, _0,)
+#define SPR_EX_CONTEXT_K_1 \
+	_concat4(SPR_EX_CONTEXT_, CONFIG_KERNEL_PL, _1,)
+#define SPR_INTCTRL_K_STATUS \
+	_concat4(SPR_INTCTRL_, CONFIG_KERNEL_PL, _STATUS,)
+#define INT_INTCTRL_K \
+	_concat4(INT_INTCTRL_, CONFIG_KERNEL_PL,,)
--- a/arch/tile/include/arch/spr_def_32.h
+++ b/arch/tile/include/arch/spr_def_32.h
@@ -56,58 +56,93 @@
 #define SPR_EX_CONTEXT_1_1__ICS_SHIFT 2
 #define SPR_EX_CONTEXT_1_1__ICS_RMASK 0x1
 #define SPR_EX_CONTEXT_1_1__ICS_MASK  0x4
+#define SPR_EX_CONTEXT_2_0 0x4605
+#define SPR_EX_CONTEXT_2_1 0x4606
+#define SPR_EX_CONTEXT_2_1__PL_SHIFT 0
+#define SPR_EX_CONTEXT_2_1__PL_RMASK 0x3
+#define SPR_EX_CONTEXT_2_1__PL_MASK  0x3
+#define SPR_EX_CONTEXT_2_1__ICS_SHIFT 2
+#define SPR_EX_CONTEXT_2_1__ICS_RMASK 0x1
+#define SPR_EX_CONTEXT_2_1__ICS_MASK  0x4
 #define SPR_FAIL 0x4e09
 #define SPR_INTCTRL_0_STATUS 0x4a07
 #define SPR_INTCTRL_1_STATUS 0x4807
+#define SPR_INTCTRL_2_STATUS 0x4607
 #define SPR_INTERRUPT_CRITICAL_SECTION 0x4e0a
 #define SPR_INTERRUPT_MASK_0_0 0x4a08
 #define SPR_INTERRUPT_MASK_0_1 0x4a09
 #define SPR_INTERRUPT_MASK_1_0 0x4809
 #define SPR_INTERRUPT_MASK_1_1 0x480a
+#define SPR_INTERRUPT_MASK_2_0 0x4608
+#define SPR_INTERRUPT_MASK_2_1 0x4609
 #define SPR_INTERRUPT_MASK_RESET_0_0 0x4a0a
 #define SPR_INTERRUPT_MASK_RESET_0_1 0x4a0b
 #define SPR_INTERRUPT_MASK_RESET_1_0 0x480b
 #define SPR_INTERRUPT_MASK_RESET_1_1 0x480c
+#define SPR_INTERRUPT_MASK_RESET_2_0 0x460a
+#define SPR_INTERRUPT_MASK_RESET_2_1 0x460b
 #define SPR_INTERRUPT_MASK_SET_0_0 0x4a0c
 #define SPR_INTERRUPT_MASK_SET_0_1 0x4a0d
 #define SPR_INTERRUPT_MASK_SET_1_0 0x480d
 #define SPR_INTERRUPT_MASK_SET_1_1 0x480e
+#define SPR_INTERRUPT_MASK_SET_2_0 0x460c
+#define SPR_INTERRUPT_MASK_SET_2_1 0x460d
 #define SPR_MPL_DMA_CPL_SET_0 0x5800
 #define SPR_MPL_DMA_CPL_SET_1 0x5801
+#define SPR_MPL_DMA_CPL_SET_2 0x5802
 #define SPR_MPL_DMA_NOTIFY_SET_0 0x3800
 #define SPR_MPL_DMA_NOTIFY_SET_1 0x3801
+#define SPR_MPL_DMA_NOTIFY_SET_2 0x3802
 #define SPR_MPL_INTCTRL_0_SET_0 0x4a00
 #define SPR_MPL_INTCTRL_0_SET_1 0x4a01
+#define SPR_MPL_INTCTRL_0_SET_2 0x4a02
 #define SPR_MPL_INTCTRL_1_SET_0 0x4800
 #define SPR_MPL_INTCTRL_1_SET_1 0x4801
+#define SPR_MPL_INTCTRL_1_SET_2 0x4802
+#define SPR_MPL_INTCTRL_2_SET_0 0x4600
+#define SPR_MPL_INTCTRL_2_SET_1 0x4601
+#define SPR_MPL_INTCTRL_2_SET_2 0x4602
 #define SPR_MPL_SN_ACCESS_SET_0 0x0800
 #define SPR_MPL_SN_ACCESS_SET_1 0x0801
+#define SPR_MPL_SN_ACCESS_SET_2 0x0802
 #define SPR_MPL_SN_CPL_SET_0 0x5a00
 #define SPR_MPL_SN_CPL_SET_1 0x5a01
+#define SPR_MPL_SN_CPL_SET_2 0x5a02
 #define SPR_MPL_SN_FIREWALL_SET_0 0x2c00
 #define SPR_MPL_SN_FIREWALL_SET_1 0x2c01
+#define SPR_MPL_SN_FIREWALL_SET_2 0x2c02
 #define SPR_MPL_SN_NOTIFY_SET_0 0x2a00
 #define SPR_MPL_SN_NOTIFY_SET_1 0x2a01
+#define SPR_MPL_SN_NOTIFY_SET_2 0x2a02
 #define SPR_MPL_UDN_ACCESS_SET_0 0x0c00
 #define SPR_MPL_UDN_ACCESS_SET_1 0x0c01
+#define SPR_MPL_UDN_ACCESS_SET_2 0x0c02
 #define SPR_MPL_UDN_AVAIL_SET_0 0x4000
 #define SPR_MPL_UDN_AVAIL_SET_1 0x4001
+#define SPR_MPL_UDN_AVAIL_SET_2 0x4002
 #define SPR_MPL_UDN_CA_SET_0 0x3c00
 #define SPR_MPL_UDN_CA_SET_1 0x3c01
+#define SPR_MPL_UDN_CA_SET_2 0x3c02
 #define SPR_MPL_UDN_COMPLETE_SET_0 0x1400
 #define SPR_MPL_UDN_COMPLETE_SET_1 0x1401
+#define SPR_MPL_UDN_COMPLETE_SET_2 0x1402
 #define SPR_MPL_UDN_FIREWALL_SET_0 0x3000
 #define SPR_MPL_UDN_FIREWALL_SET_1 0x3001
+#define SPR_MPL_UDN_FIREWALL_SET_2 0x3002
 #define SPR_MPL_UDN_REFILL_SET_0 0x1000
 #define SPR_MPL_UDN_REFILL_SET_1 0x1001
+#define SPR_MPL_UDN_REFILL_SET_2 0x1002
 #define SPR_MPL_UDN_TIMER_SET_0 0x3600
 #define SPR_MPL_UDN_TIMER_SET_1 0x3601
+#define SPR_MPL_UDN_TIMER_SET_2 0x3602
 #define SPR_MPL_WORLD_ACCESS_SET_0 0x4e00
 #define SPR_MPL_WORLD_ACCESS_SET_1 0x4e01
+#define SPR_MPL_WORLD_ACCESS_SET_2 0x4e02
 #define SPR_PASS 0x4e0b
 #define SPR_PERF_COUNT_0 0x4205
 #define SPR_PERF_COUNT_1 0x4206
 #define SPR_PERF_COUNT_CTL 0x4207
+#define SPR_PERF_COUNT_DN_CTL 0x4210
 #define SPR_PERF_COUNT_STS 0x4208
 #define SPR_PROC_STATUS 0x4f00
 #define SPR_SIM_CONTROL 0x4e0c
@@ -124,6 +159,10 @@
 #define SPR_SYSTEM_SAVE_1_1 0x4901
 #define SPR_SYSTEM_SAVE_1_2 0x4902
 #define SPR_SYSTEM_SAVE_1_3 0x4903
+#define SPR_SYSTEM_SAVE_2_0 0x4700
+#define SPR_SYSTEM_SAVE_2_1 0x4701
+#define SPR_SYSTEM_SAVE_2_2 0x4702
+#define SPR_SYSTEM_SAVE_2_3 0x4703
 #define SPR_TILE_COORD 0x4c17
 #define SPR_TILE_RTF_HWM 0x4e10
 #define SPR_TILE_TIMER_CONTROL 0x3205
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -47,53 +47,53 @@
 	int __n = (n); \
 	int __mask = 1 << (__n & 0x1f); \
 	if (__n < 32) \
-		__insn_mtspr(SPR_INTERRUPT_MASK_SET_1_0, __mask); \
+		__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, __mask); \
 	else \
-		__insn_mtspr(SPR_INTERRUPT_MASK_SET_1_1, __mask); \
+		__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, __mask); \
 } while (0)
 #define interrupt_mask_reset(n) do { \
 	int __n = (n); \
 	int __mask = 1 << (__n & 0x1f); \
 	if (__n < 32) \
-		__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_0, __mask); \
+		__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, __mask); \
 	else \
-		__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_1, __mask); \
+		__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, __mask); \
 } while (0)
 #define interrupt_mask_check(n) ({ \
 	int __n = (n); \
 	(((__n < 32) ? \
-	 __insn_mfspr(SPR_INTERRUPT_MASK_1_0) : \
-	 __insn_mfspr(SPR_INTERRUPT_MASK_1_1)) \
+	 __insn_mfspr(SPR_INTERRUPT_MASK_K_0) : \
+	 __insn_mfspr(SPR_INTERRUPT_MASK_K_1)) \
 	  >> (__n & 0x1f)) & 1; \
 })
 #define interrupt_mask_set_mask(mask) do { \
 	unsigned long long __m = (mask); \
-	__insn_mtspr(SPR_INTERRUPT_MASK_SET_1_0, (unsigned long)(__m)); \
-	__insn_mtspr(SPR_INTERRUPT_MASK_SET_1_1, (unsigned long)(__m>>32)); \
+	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_0, (unsigned long)(__m)); \
+	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K_1, (unsigned long)(__m>>32)); \
 } while (0)
 #define interrupt_mask_reset_mask(mask) do { \
 	unsigned long long __m = (mask); \
-	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_0, (unsigned long)(__m)); \
-	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_1, (unsigned long)(__m>>32)); \
+	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_0, (unsigned long)(__m)); \
+	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K_1, (unsigned long)(__m>>32)); \
 } while (0)
 #else
 #define interrupt_mask_set(n) \
-	__insn_mtspr(SPR_INTERRUPT_MASK_SET_1, (1UL << (n)))
+	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (1UL << (n)))
 #define interrupt_mask_reset(n) \
-	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1, (1UL << (n)))
+	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (1UL << (n)))
 #define interrupt_mask_check(n) \
-	((__insn_mfspr(SPR_INTERRUPT_MASK_1) >> (n)) & 1)
+	((__insn_mfspr(SPR_INTERRUPT_MASK_K) >> (n)) & 1)
 #define interrupt_mask_set_mask(mask) \
-	__insn_mtspr(SPR_INTERRUPT_MASK_SET_1, (mask))
+	__insn_mtspr(SPR_INTERRUPT_MASK_SET_K, (mask))
 #define interrupt_mask_reset_mask(mask) \
-	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1, (mask))
+	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_K, (mask))
 #endif

 /*
 * The set of interrupts we want active if irqs are enabled.
 * Note that in particular, the tile timer interrupt comes and goes
 * from this set, since we have no other way to turn off the timer.
- * Likewise, INTCTRL_1 is removed and re-added during device
+ * Likewise, INTCTRL_K is removed and re-added during device
 * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
 * We use a low bit (MEM_ERROR) as our sentinel value and make sure it
 * is always claimed as an "active interrupt" so we can query that bit
@@ -168,14 +168,14 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);

 /* Return 0 or 1 to indicate whether interrupts are currently disabled. */
 #define IRQS_DISABLED(tmp)					\
-	mfspr   tmp, INTERRUPT_MASK_1;				\
+	mfspr   tmp, SPR_INTERRUPT_MASK_K;			\
 	andi    tmp, tmp, 1

 /* Load up a pointer to &interrupts_enabled_mask. */
 #define GET_INTERRUPTS_ENABLED_MASK_PTR(reg)			\
-	moveli reg, hw2_last(interrupts_enabled_mask); \
-	shl16insli reg, reg, hw1(interrupts_enabled_mask); \
-	shl16insli reg, reg, hw0(interrupts_enabled_mask); \
+	moveli reg, hw2_last(interrupts_enabled_mask);		\
+	shl16insli reg, reg, hw1(interrupts_enabled_mask);	\
+	shl16insli reg, reg, hw0(interrupts_enabled_mask);	\
 	add     reg, reg, tp

 /* Disable interrupts. */
@@ -183,18 +183,18 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 	moveli  tmp0, hw2_last(LINUX_MASKABLE_INTERRUPTS);	\
 	shl16insli tmp0, tmp0, hw1(LINUX_MASKABLE_INTERRUPTS);	\
 	shl16insli tmp0, tmp0, hw0(LINUX_MASKABLE_INTERRUPTS);	\
-	mtspr   INTERRUPT_MASK_SET_1, tmp0
+	mtspr   SPR_INTERRUPT_MASK_SET_K, tmp0

 /* Disable ALL synchronous interrupts (used by NMI entry). */
 #define IRQ_DISABLE_ALL(tmp)					\
 	movei   tmp, -1;					\
-	mtspr   INTERRUPT_MASK_SET_1, tmp
+	mtspr   SPR_INTERRUPT_MASK_SET_K, tmp

 /* Enable interrupts. */
 #define IRQ_ENABLE(tmp0, tmp1)					\
 	GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0);			\
 	ld      tmp0, tmp0;					\
-	mtspr   INTERRUPT_MASK_RESET_1, tmp0
+	mtspr   SPR_INTERRUPT_MASK_RESET_K, tmp0

 #else /* !__tilegx__ */

@@ -208,14 +208,14 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 * (making the original code's write of the "high" mask word idempotent).
 */
 #define IRQS_DISABLED(tmp)					\
-	mfspr   tmp, INTERRUPT_MASK_1_0;			\
+	mfspr   tmp, SPR_INTERRUPT_MASK_K_0;			\
 	shri    tmp, tmp, INT_MEM_ERROR;			\
 	andi    tmp, tmp, 1

 /* Load up a pointer to &interrupts_enabled_mask. */
 #define GET_INTERRUPTS_ENABLED_MASK_PTR(reg)			\
-	moveli  reg, lo16(interrupts_enabled_mask);	\
-	auli    reg, reg, ha16(interrupts_enabled_mask);\
+	moveli  reg, lo16(interrupts_enabled_mask);		\
+	auli    reg, reg, ha16(interrupts_enabled_mask);	\
 	add     reg, reg, tp

 /* Disable interrupts. */
@@ -225,16 +225,16 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 	 moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS)		\
 	};							\
 	{							\
-	 mtspr  INTERRUPT_MASK_SET_1_0, tmp0;			\
+	 mtspr  SPR_INTERRUPT_MASK_SET_K_0, tmp0;		\
 	 auli   tmp1, tmp1, ha16(LINUX_MASKABLE_INTERRUPTS)	\
 	};							\
-	mtspr   INTERRUPT_MASK_SET_1_1, tmp1
+	mtspr   SPR_INTERRUPT_MASK_SET_K_1, tmp1

 /* Disable ALL synchronous interrupts (used by NMI entry). */
 #define IRQ_DISABLE_ALL(tmp)					\
 	movei   tmp, -1;					\
-	mtspr   INTERRUPT_MASK_SET_1_0, tmp;			\
-	mtspr   INTERRUPT_MASK_SET_1_1, tmp
+	mtspr   SPR_INTERRUPT_MASK_SET_K_0, tmp;		\
+	mtspr   SPR_INTERRUPT_MASK_SET_K_1, tmp

 /* Enable interrupts. */
 #define IRQ_ENABLE(tmp0, tmp1)					\
@@ -244,8 +244,8 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 	 addi   tmp1, tmp0, 4					\
 	};							\
 	lw      tmp1, tmp1;					\
-	mtspr   INTERRUPT_MASK_RESET_1_0, tmp0;			\
-	mtspr   INTERRUPT_MASK_RESET_1_1, tmp1
+	mtspr   SPR_INTERRUPT_MASK_RESET_K_0, tmp0;		\
+	mtspr   SPR_INTERRUPT_MASK_RESET_K_1, tmp1
 #endif

 /*
--- a/arch/tile/include/asm/page.h
+++ b/arch/tile/include/asm/page.h
@@ -199,17 +199,17 @@ static inline __attribute_const__ int get_order(unsigned long size)
 * If you want more physical memory than this then see the CONFIG_HIGHMEM
 * option in the kernel configuration.
 *
- * The top two 16MB chunks in the table below (VIRT and HV) are
- * unavailable to Linux.  Since the kernel interrupt vectors must live
- * at 0xfd000000, we map all of the bottom of RAM at this address with
- * a huge page table entry to minimize its ITLB footprint (as well as
- * at PAGE_OFFSET).  The last architected requirement is that user
- * interrupt vectors live at 0xfc000000, so we make that range of
- * memory available to user processes.  The remaining regions are sized
- * as shown; after the first four addresses, we show "typical" values,
- * since the actual addresses depend on kernel #defines.
+ * The top 16MB chunk in the table below is unavailable to Linux.  Since
+ * the kernel interrupt vectors must live at ether 0xfe000000 or 0xfd000000
+ * (depending on whether the kernel is at PL2 or Pl1), we map all of the
+ * bottom of RAM at this address with a huge page table entry to minimize
+ * its ITLB footprint (as well as at PAGE_OFFSET).  The last architected
+ * requirement is that user interrupt vectors live at 0xfc000000, so we
+ * make that range of memory available to user processes.  The remaining
+ * regions are sized as shown; the first four addresses use the PL 1
+ * values, and after that, we show "typical" values, since the actual
+ * addresses depend on kernel #defines.
 *
- * MEM_VIRT_INTRPT                 0xff000000
 * MEM_HV_INTRPT                   0xfe000000
 * MEM_SV_INTRPT (kernel code)     0xfd000000
 * MEM_USER_INTRPT (user vector)   0xfc000000
@@ -221,9 +221,14 @@ static inline __attribute_const__ int get_order(unsigned long size)
 */

 #define MEM_USER_INTRPT		_AC(0xfc000000, UL)
+#if CONFIG_KERNEL_PL == 1
 #define MEM_SV_INTRPT		_AC(0xfd000000, UL)
 #define MEM_HV_INTRPT		_AC(0xfe000000, UL)
-#define MEM_VIRT_INTRPT		_AC(0xff000000, UL)
+#else
+#define MEM_GUEST_INTRPT	_AC(0xfd000000, UL)
+#define MEM_SV_INTRPT		_AC(0xfe000000, UL)
+#define MEM_HV_INTRPT		_AC(0xff000000, UL)
+#endif

 #define INTRPT_SIZE		0x4000

--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -328,18 +328,21 @@ extern int kdata_huge;
 * Note that assembly code assumes that USER_PL is zero.
 */
 #define USER_PL 0
-#define KERNEL_PL 1
+#if CONFIG_KERNEL_PL == 2
+#define GUEST_PL 1
+#endif
+#define KERNEL_PL CONFIG_KERNEL_PL

-/* SYSTEM_SAVE_1_0 holds the current cpu number ORed with ksp0. */
+/* SYSTEM_SAVE_K_0 holds the current cpu number ORed with ksp0. */
 #define CPU_LOG_MASK_VALUE 12
 #define CPU_MASK_VALUE ((1 << CPU_LOG_MASK_VALUE) - 1)
 #if CONFIG_NR_CPUS > CPU_MASK_VALUE
 # error Too many cpus!
 #endif
 #define raw_smp_processor_id() \
-	((int)__insn_mfspr(SPR_SYSTEM_SAVE_1_0) & CPU_MASK_VALUE)
+	((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & CPU_MASK_VALUE)
 #define get_current_ksp0() \
-	(__insn_mfspr(SPR_SYSTEM_SAVE_1_0) & ~CPU_MASK_VALUE)
+	(__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~CPU_MASK_VALUE)
 #define next_current_ksp0(task) ({ \
 	unsigned long __ksp0 = task_ksp0(task); \
 	int __cpu = raw_smp_processor_id(); \
--- a/arch/tile/include/asm/ptrace.h
+++ b/arch/tile/include/asm/ptrace.h
@@ -62,8 +62,8 @@ struct pt_regs {
 	pt_reg_t lr;		/* aliases regs[TREG_LR] */

 	/* Saved special registers. */
-	pt_reg_t pc;		/* stored in EX_CONTEXT_1_0 */
-	pt_reg_t ex1;		/* stored in EX_CONTEXT_1_1 (PL and ICS bit) */
+	pt_reg_t pc;		/* stored in EX_CONTEXT_K_0 */
+	pt_reg_t ex1;		/* stored in EX_CONTEXT_K_1 (PL and ICS bit) */
 	pt_reg_t faultnum;	/* fault number (INT_SWINT_1 for syscall) */
 	pt_reg_t orig_r0;	/* r0 at syscall entry, else zero */
 	pt_reg_t flags;		/* flags (see below) */
--- a/arch/tile/include/asm/system.h
+++ b/arch/tile/include/asm/system.h
@@ -164,7 +164,7 @@ extern struct task_struct *_switch_to(struct task_struct *prev,
 /* Helper function for _switch_to(). */
 extern struct task_struct *__switch_to(struct task_struct *prev,
 				       struct task_struct *next,
-				       unsigned long new_system_save_1_0);
+				       unsigned long new_system_save_k_0);

 /* Address that switched-away from tasks are at. */
 extern unsigned long get_switch_to_pc(void);
--- a/arch/tile/include/hv/hypervisor.h
+++ b/arch/tile/include/hv/hypervisor.h
@@ -1003,37 +1003,37 @@ int hv_console_write(HV_VirtAddr bytes, int len);
 *  when these occur in a client's interrupt critical section, they must
 *  be delivered through the downcall mechanism.
 *
- *  A downcall is initially delivered to the client as an INTCTRL_1
- *  interrupt.  Upon entry to the INTCTRL_1 vector, the client must
- *  immediately invoke the hv_downcall_dispatch service.  This service
- *  will not return; instead it will cause one of the client's actual
- *  downcall-handling interrupt vectors to be entered.  The EX_CONTEXT
- *  registers in the client will be set so that when the client irets,
- *  it will return to the code which was interrupted by the INTCTRL_1
- *  interrupt.
+ *  A downcall is initially delivered to the client as an INTCTRL_CL
+ *  interrupt, where CL is the client's PL.  Upon entry to the INTCTRL_CL
+ *  vector, the client must immediately invoke the hv_downcall_dispatch
+ *  service.  This service will not return; instead it will cause one of
+ *  the client's actual downcall-handling interrupt vectors to be entered.
+ *  The EX_CONTEXT registers in the client will be set so that when the
+ *  client irets, it will return to the code which was interrupted by the
+ *  INTCTRL_CL interrupt.
 *
- *  Under some circumstances, the firing of INTCTRL_1 can race with
+ *  Under some circumstances, the firing of INTCTRL_CL can race with
 *  the lowering of a device interrupt.  In such a case, the
 *  hv_downcall_dispatch service may issue an iret instruction instead
 *  of entering one of the client's actual downcall-handling interrupt
 *  vectors.  This will return execution to the location that was
- *  interrupted by INTCTRL_1.
+ *  interrupted by INTCTRL_CL.
 *
 *  Any saving of registers should be done by the actual handling
- *  vectors; no registers should be changed by the INTCTRL_1 handler.
+ *  vectors; no registers should be changed by the INTCTRL_CL handler.
 *  In particular, the client should not use a jal instruction to invoke
 *  the hv_downcall_dispatch service, as that would overwrite the client's
 *  lr register.  Note that the hv_downcall_dispatch service may overwrite
 *  one or more of the client's system save registers.
 *
- *  The client must not modify the INTCTRL_1_STATUS SPR.  The hypervisor
+ *  The client must not modify the INTCTRL_CL_STATUS SPR.  The hypervisor
 *  will set this register to cause a downcall to happen, and will clear
 *  it when no further downcalls are pending.
 *
- *  When a downcall vector is entered, the INTCTRL_1 interrupt will be
+ *  When a downcall vector is entered, the INTCTRL_CL interrupt will be
 *  masked.  When the client is done processing a downcall, and is ready
 *  to accept another, it must unmask this interrupt; if more downcalls
- *  are pending, this will cause the INTCTRL_1 vector to be reentered.
+ *  are pending, this will cause the INTCTRL_CL vector to be reentered.
 *  Currently the following interrupt vectors can be entered through a
 *  downcall:
 *