Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull EFI updates from Ingo Molnar:
 "The EFI changes in this cycle are much larger than usual, for two
  (positive) reasons:

   - The GRUB project is showing signs of life again, resulting in the
     introduction of the generic Linux/UEFI boot protocol, instead of
     x86 specific hacks which are increasingly difficult to maintain.
     There's hope that all future extensions will now go through that
     boot protocol.

   - Preparatory work for RISC-V EFI support.

  The main changes are:

   - Boot time GDT handling changes

   - Simplify handling of EFI properties table on arm64

   - Generic EFI stub cleanups, to improve command line handling, file
     I/O, memory allocation, etc.

   - Introduce a generic initrd loading method based on calling back
     into the firmware, instead of relying on the x86 EFI handover
     protocol or device tree.

   - Introduce a mixed mode boot method that does not rely on the x86
     EFI handover protocol either, and could potentially be adopted by
     other architectures (if another one ever surfaces where one
     execution mode is a superset of another)

   - Clean up the contents of 'struct efi', and move out everything that
     doesn't need to be stored there.

   - Incorporate support for UEFI spec v2.8A changes that permit
     firmware implementations to return EFI_UNSUPPORTED from UEFI
     runtime services at OS runtime, and expose a mask of which ones are
     supported or unsupported via a configuration table.

   - Partial fix for the lack of by-VA cache maintenance in the
     decompressor on 32-bit ARM.

   - Changes to load device firmware from EFI boot service memory
     regions

   - Various documentation updates and minor code cleanups and fixes"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  efi/libstub/arm: Fix spurious message that an initrd was loaded
  efi/libstub/arm64: Avoid image_base value from efi_loaded_image
  partitions/efi: Fix partition name parsing in GUID partition entry
  efi/x86: Fix cast of image argument
  efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
  efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
  efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
  efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
  efi/x86: Ignore the memory attributes table on i386
  efi/x86: Don't relocate the kernel unless necessary
  efi/x86: Remove extra headroom for setup block
  efi/x86: Add kernel preferred address to PE header
  efi/x86: Decompress at start of PE image load address
  x86/boot/compressed/32: Save the output address instead of recalculating it
  efi/libstub/x86: Deal with exit() boot service returning
  x86/boot: Use unsigned comparison for addresses
  efi/x86: Avoid using code32_start
  efi/x86: Make efi32_pe_entry() more readable
  efi/x86: Respect 32-bit ABI in efi32_pe_entry()
  efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
  ...

arch/arm/boot/compressed/efi-header.S

@@ -60,7 +60,7 @@ optional_header:
 		.long	__pecoff_code_size		@ SizeOfCode
 		.long	__pecoff_data_size		@ SizeOfInitializedData
 		.long	0				@ SizeOfUninitializedData
-		.long	efi_stub_entry - start		@ AddressOfEntryPoint
+		.long	efi_entry - start		@ AddressOfEntryPoint
 		.long	start_offset			@ BaseOfCode
 		.long	__pecoff_data_start - start	@ BaseOfData
 
@@ -70,8 +70,8 @@ extra_header_fields:
 		.long	SZ_512				@ FileAlignment
 		.short	0				@ MajorOsVersion
 		.short	0				@ MinorOsVersion
-		.short	0				@ MajorImageVersion
-		.short	0				@ MinorImageVersion
+		.short	LINUX_EFISTUB_MAJOR_VERSION	@ MajorImageVersion
+		.short	LINUX_EFISTUB_MINOR_VERSION	@ MinorImageVersion
 		.short	0				@ MajorSubsystemVersion
 		.short	0				@ MinorSubsystemVersion
 		.long	0				@ Win32VersionValue

arch/arm/boot/compressed/head.S

@@ -1437,29 +1437,25 @@ __enter_kernel:
 reloc_code_end:
 
 #ifdef CONFIG_EFI_STUB
-		.align	2
-_start:		.long	start - .
+ENTRY(efi_enter_kernel)
+		mov	r7, r0				@ preserve image base
+		mov	r4, r1				@ preserve DT pointer
 
-ENTRY(efi_stub_entry)
-		@ allocate space on stack for passing current zImage address
-		@ and for the EFI stub to return of new entry point of
-		@ zImage, as EFI stub may copy the kernel. Pointer address
-		@ is passed in r2. r0 and r1 are passed through from the
-		@ EFI firmware to efi_entry
-		adr	ip, _start
-		ldr	r3, [ip]
-		add	r3, r3, ip
-		stmfd	sp!, {r3, lr}
-		mov	r2, sp			@ pass zImage address in r2
-		bl	efi_entry
+		mov	r0, r4				@ DT start
+		add	r1, r4, r2			@ DT end
+		bl	cache_clean_flush
 
-		@ Check for error return from EFI stub. r0 has FDT address
-		@ or error code.
-		cmn	r0, #1
-		beq	efi_load_fail
+		mov	r0, r7				@ relocated zImage
+		ldr	r1, =_edata			@ size of zImage
+		add	r1, r1, r0			@ end of zImage
+		bl	cache_clean_flush
 
-		@ Preserve return value of efi_entry() in r4
-		mov	r4, r0
+		@ The PE/COFF loader might not have cleaned the code we are
+		@ running beyond the PoU, and so calling cache_off below from
+		@ inside the PE/COFF loader allocated region is unsafe unless
+		@ we explicitly clean it to the PoC.
+		adr	r0, call_cache_fn		@ region of code we will
+		adr	r1, 0f				@ run with MMU off
 		bl	cache_clean_flush
 		bl	cache_off
 
@@ -1469,18 +1465,10 @@ ENTRY(efi_stub_entry)
 		mov	r0, #0
 		mov	r1, #0xFFFFFFFF
 		mov	r2, r4
-
-		@ Branch to (possibly) relocated zImage that is in [sp]
-		ldr	lr, [sp]
-		ldr	ip, =start_offset
-		add	lr, lr, ip
-		mov	pc, lr				@ no mode switch
-
-efi_load_fail:
-		@ Return EFI_LOAD_ERROR to EFI firmware on error.
-		ldr	r0, =0x80000001
-		ldmfd	sp!, {ip, pc}
-ENDPROC(efi_stub_entry)
+		add	r7, r7, #(__efi_start - start)
+		mov	pc, r7				@ no mode switch
+ENDPROC(efi_enter_kernel)
+0:
 #endif
 
 		.align