Merge tag 'spi-nor/for-4.14' of git://git.infradead.org/l2-mtd into mtd/next

From Cyrille:
"
This pull request contains the following notable changes:
- add support to the JEDEC JESD216B specification (SFDP tables).
- add support to the Intel Denverton SPI flash controller.
- fix error recovery for Spansion/Cypress SPI NOR memories.
- fix 4-byte address management for the Aspeed SPI controller.
- add support to some Microchip SST26 memory parts
- remove unneeded pinctrl header
"

include/linux/mtd/spi-nor.h

@@ -41,6 +41,8 @@
 #define SPINOR_OP_WREN		0x06	/* Write enable */
 #define SPINOR_OP_RDSR		0x05	/* Read status register */
 #define SPINOR_OP_WRSR		0x01	/* Write status register 1 byte */
+#define SPINOR_OP_RDSR2		0x3f	/* Read status register 2 */
+#define SPINOR_OP_WRSR2		0x3e	/* Write status register 2 */
 #define SPINOR_OP_READ		0x03	/* Read data bytes (low frequency) */
 #define SPINOR_OP_READ_FAST	0x0b	/* Read data bytes (high frequency) */
 #define SPINOR_OP_READ_1_1_2	0x3b	/* Read data bytes (Dual Output SPI) */
@@ -56,6 +58,7 @@
 #define SPINOR_OP_CHIP_ERASE	0xc7	/* Erase whole flash chip */
 #define SPINOR_OP_SE		0xd8	/* Sector erase (usually 64KiB) */
 #define SPINOR_OP_RDID		0x9f	/* Read JEDEC ID */
+#define SPINOR_OP_RDSFDP	0x5a	/* Read SFDP */
 #define SPINOR_OP_RDCR		0x35	/* Read configuration register */
 #define SPINOR_OP_RDFSR		0x70	/* Read flag status register */
 
@@ -102,6 +105,7 @@
 
 /* Used for Spansion flashes only. */
 #define SPINOR_OP_BRWR		0x17	/* Bank register write */
+#define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
 
 /* Used for Micron flashes only. */
 #define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
@@ -116,6 +120,9 @@
 #define SR_BP2			BIT(4)	/* Block protect 2 */
 #define SR_TB			BIT(5)	/* Top/Bottom protect */
 #define SR_SRWD			BIT(7)	/* SR write protect */
+/* Spansion/Cypress specific status bits */
+#define SR_E_ERR		BIT(5)
+#define SR_P_ERR		BIT(6)
 
 #define SR_QUAD_EN_MX		BIT(6)	/* Macronix Quad I/O */
 
@@ -128,6 +135,9 @@
 /* Configuration Register bits. */
 #define CR_QUAD_EN_SPAN		BIT(1)	/* Spansion Quad I/O */
 
+/* Status Register 2 bits. */
+#define SR2_QUAD_EN_BIT7	BIT(7)
+
 /* Supported SPI protocols */
 #define SNOR_PROTO_INST_MASK	GENMASK(23, 16)
 #define SNOR_PROTO_INST_SHIFT	16
@@ -218,6 +228,7 @@ enum spi_nor_option_flags {
 	SNOR_F_NO_OP_CHIP_ERASE	= BIT(2),
 	SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
 	SNOR_F_READY_XSR_RDY	= BIT(4),
+	SNOR_F_USE_CLSR		= BIT(5),
 };
 
 /**