Merge tag 'v4.9-rc3' into next/dt64

Linux 4.9-rc3

* tag 'v4.9-rc3': (292 commits)
  Linux 4.9-rc3
  x86/smpboot: Init apic mapping before usage
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination
  ARC: module: print pretty section names
  ARC: module: elide loop to save reference to .eh_frame
  ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...
  ARC: build: retire old toggles
  ARC: boot log: refactor cpu name/release printing
  ARC: boot log: remove awkward space comma from MMU line
  ARC: boot log: don't assume SWAPE instruction support
  ARC: boot log: refactor printing abt features not captured in BCRs
  ARCv2: boot log: print IOC exists as well as enabled status
  ubifs: Fix regression in ubifs_readdir()
  ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  ...

arch/arm64/boot/dts/broadcom/ns2-svk.dts

@@ -164,6 +164,8 @@
 		nand-ecc-mode = "hw";
 		nand-ecc-strength = <8>;
 		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -123,6 +123,7 @@
 			     <1 14 0xf08>, /* Physical Non-Secure PPI */
 			     <1 11 0xf08>, /* Virtual PPI */
 			     <1 10 0xf08>; /* Hypervisor PPI */
+		fsl,erratum-a008585;
 	};
 
 	pmu {

arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi

@@ -195,6 +195,7 @@
 			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
 			     <1 11 4>, /* Virtual PPI, active-low */
 			     <1 10 4>; /* Hypervisor PPI, active-low */
+		fsl,erratum-a008585;
 	};
 
 	pmu {

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -131,7 +131,7 @@
 				#address-cells = <0x1>;
 				#size-cells = <0x0>;
 				cell-index = <1>;
-				clocks = <&cpm_syscon0 0 3>;
+				clocks = <&cpm_syscon0 1 21>;
 				status = "disabled";
 			};
 

arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts

@@ -116,7 +116,6 @@
 	cap-mmc-highspeed;
 	clock-frequency = <150000000>;
 	disable-wp;
-	keep-power-in-suspend;
 	non-removable;
 	num-slots = <1>;
 	vmmc-supply = <&vcc_io>;
@@ -258,8 +257,6 @@
 			};
 
 			vcc_sd: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-name = "vcc_sd";
 			};
 

arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts

@@ -152,8 +152,6 @@
 		gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
 		vin-supply = <&vcc_io>;
 	};
 
@@ -201,7 +199,6 @@
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
-	keep-power-in-suspend;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	mmc-hs200-1_2v;
 	mmc-hs200-1_8v;
@@ -350,7 +347,6 @@
 	clock-freq-min-max = <400000 50000000>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
-	keep-power-in-suspend;
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;

arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi

@@ -257,18 +257,18 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		mioctrl@59810000 {
-			compatible = "socionext,uniphier-mioctrl",
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-ld20-sdctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x800>;
 
-			mio_clk: clock {
-				compatible = "socionext,uniphier-ld20-mio-clock";
+			sd_clk: clock {
+				compatible = "socionext,uniphier-ld20-sd-clock";
 				#clock-cells = <1>;
 			};
 
-			mio_rst: reset {
-				compatible = "socionext,uniphier-ld20-mio-reset";
+			sd_rst: reset {
+				compatible = "socionext,uniphier-ld20-sd-reset";
 				#reset-cells = <1>;
 			};
 		};