i2c: uniphier(-f): remove all dev_dbg()

I have fixed various bugs, and these drivers are (I hope) pretty
stable now. Remove all dev_dbg() for code clean-up.

If I end up with debugging the drivers again, I will locally revert
this commit. I no longer need the debug code in upstream.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-uniphier-f.c

@@ -108,7 +108,6 @@ static void uniphier_fi2c_fill_txfifo(struct uniphier_fi2c_priv *priv,
 		if (fifo_space-- <= 0)
 			break;
 
-		dev_dbg(&priv->adap.dev, "write data: %02x\n", *priv->buf);
 		writel(*priv->buf++, priv->membase + UNIPHIER_FI2C_DTTX);
 		priv->len--;
 	}
@@ -124,7 +123,6 @@ static void uniphier_fi2c_drain_rxfifo(struct uniphier_fi2c_priv *priv)
 			break;
 
 		*priv->buf++ = readl(priv->membase + UNIPHIER_FI2C_DTRX);
-		dev_dbg(&priv->adap.dev, "read data: %02x\n", priv->buf[-1]);
 		priv->len--;
 	}
 }
@@ -142,8 +140,6 @@ static void uniphier_fi2c_clear_irqs(struct uniphier_fi2c_priv *priv,
 
 static void uniphier_fi2c_stop(struct uniphier_fi2c_priv *priv)
 {
-	dev_dbg(&priv->adap.dev, "stop condition\n");
-
 	priv->enabled_irqs |= UNIPHIER_FI2C_INT_STOP;
 	uniphier_fi2c_set_irqs(priv);
 	writel(UNIPHIER_FI2C_CR_MST | UNIPHIER_FI2C_CR_STO,
@@ -160,21 +156,15 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
 	irq_status = readl(priv->membase + UNIPHIER_FI2C_INT);
 	irq_status &= priv->enabled_irqs;
 
-	dev_dbg(&priv->adap.dev,
-		"interrupt: enabled_irqs=%04x, irq_status=%04x\n",
-		priv->enabled_irqs, irq_status);
-
 	if (irq_status & UNIPHIER_FI2C_INT_STOP)
 		goto complete;
 
 	if (unlikely(irq_status & UNIPHIER_FI2C_INT_AL)) {
-		dev_dbg(&priv->adap.dev, "arbitration lost\n");
 		priv->error = -EAGAIN;
 		goto complete;
 	}
 
 	if (unlikely(irq_status & UNIPHIER_FI2C_INT_NA)) {
-		dev_dbg(&priv->adap.dev, "could not get ACK\n");
 		priv->error = -ENXIO;
 		if (priv->flags & UNIPHIER_FI2C_RD) {
 			/*
@@ -215,18 +205,14 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
 		if (unlikely(priv->flags & UNIPHIER_FI2C_MANUAL_NACK)) {
 			if (priv->len <= UNIPHIER_FI2C_FIFO_SIZE &&
 			    !(priv->flags & UNIPHIER_FI2C_BYTE_WISE)) {
-				dev_dbg(&priv->adap.dev,
-					"enable read byte count IRQ\n");
 				priv->enabled_irqs |= UNIPHIER_FI2C_INT_RB;
 				uniphier_fi2c_set_irqs(priv);
 				priv->flags |= UNIPHIER_FI2C_BYTE_WISE;
 			}
-			if (priv->len <= 1) {
-				dev_dbg(&priv->adap.dev, "set NACK\n");
+			if (priv->len <= 1)
 				writel(UNIPHIER_FI2C_CR_MST |
 				       UNIPHIER_FI2C_CR_NACK,
 				       priv->membase + UNIPHIER_FI2C_CR);
-			}
 		}
 
 		goto handled;
@@ -334,10 +320,6 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
 	bool is_read = msg->flags & I2C_M_RD;
 	unsigned long time_left, flags;
 
-	dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, repeat=%d, stop=%d\n",
-		is_read ? "receive" : "transmit", msg->addr, msg->len,
-		repeat, stop);
-
 	priv->len = msg->len;
 	priv->buf = msg->buf;
 	priv->enabled_irqs = UNIPHIER_FI2C_INT_FAULTS;
@@ -359,7 +341,6 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
 	else
 		uniphier_fi2c_tx_init(priv, msg->addr, repeat);
 
-	dev_dbg(&adap->dev, "start condition\n");
 	/*
 	 * For a repeated START condition, writing a slave address to the FIFO
 	 * kicks the controller. So, the UNIPHIER_FI2C_CR register should be
@@ -383,7 +364,6 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
 		uniphier_fi2c_recover(priv);
 		return -ETIMEDOUT;
 	}
-	dev_dbg(&adap->dev, "complete\n");
 
 	if (unlikely(priv->flags & UNIPHIER_FI2C_DEFER_STOP_COMP)) {
 		u32 status;