xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mmc: Power quirk for ENE controllers

Browse Source 
Support for these devices was broken for 2.6.18-rc1 and later by commit
146ad66eac, which added voltage level support.

This restores the previous behaviour for these devices by ensuring that when
the voltage is changed, only one write to set the voltage is performed.

It may be that both writes are needed if the voltage is being changed between
two non-zero values or that it's safe to ensure that only one write is done
if the hardware only supports one voltage; I don't know whether either is the
case nor can I test since I have only the one SD reader (1524:0550), and it
supports just the one voltage.

Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
This commit is contained in:
Darren Salt
2007-01-27 15:32:31 +01:00
committed by Pierre Ossman
parent 11354d03af
commit 9e9dc5f29f
2 changed files with 20 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
drivers/mmc/sdhci.c
View File

@@ -37,6 +37,7 @@ static unsigned int debug_quirks = 0;
#define SDHCI_QUIRK_FORCE_DMA (1<<1)
/* Controller doesn't like some resets when there is no card inserted. */
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
static const struct pci_device_id pci_ids[] __devinitdata = {
{
@@ -65,6 +66,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.driver_data = SDHCI_QUIRK_FORCE_DMA,
},
{
.vendor = PCI_VENDOR_ID_ENE,
.device = PCI_DEVICE_ID_ENE_CB712_SD,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE,
},
{ /* Generic SD host controller */
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
},
@@ -674,10 +683,17 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
if (host->power == power)
return;
writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
if (power == (unsigned short)-1)
if (power == (unsigned short)-1) {
writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
goto out;
}
/*
* Spec says that we should clear the power reg before setting
* a new value. Some controllers don't seem to like this though.
*/
if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
pwr = SDHCI_POWER_ON;