xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Código Incidencias Pull Requests Acciones Paquetes Proyectos Lanzamientos Wiki Actividad

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Explorar el Código 
Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...
Este commit está contenido en:
Linus Torvalds
2018-08-15 15:04:25 -07:00
padre 0a957467c5 26a1ccc6c1
commit 9a76aba02a
Se han modificado 1752 ficheros con 119281 adiciones y 29178 borrados
Descargar archivo de parche Descargar archivo de diferencias Expandir todos los archivos Contraer todos los archivos

140
arch/arm/boot/dts/gemini-dlink-dir-685.dts
Ver fichero

@@ -156,6 +156,100 @@
};
};
/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
switch {
compatible = "realtek,rtl8366rb";
/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
realtek,disable-leds;
switch_intc: interrupt-controller {
/* GPIO 15 provides the interrupt */
interrupt-parent = <&gpio0>;
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan0";
phy-handle = <&phy0>;
};
port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&phy1>;
};
port@2 {
reg = <2>;
label = "lan2";
phy-handle = <&phy2>;
};
port@3 {
reg = <3>;
label = "lan3";
phy-handle = <&phy3>;
};
port@4 {
reg = <4>;
label = "wan";
phy-handle = <&phy4>;
};
rtl8366rb_cpu_port: port@5 {
reg = <5>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
mdio {
compatible = "realtek,smi-mdio";
#address-cells = <1>;
#size-cells = <0>;
phy0: phy@0 {
reg = <0>;
interrupt-parent = <&switch_intc>;
interrupts = <0>;
};
phy1: phy@1 {
reg = <1>;
interrupt-parent = <&switch_intc>;
interrupts = <1>;
};
phy2: phy@2 {
reg = <2>;
interrupt-parent = <&switch_intc>;
interrupts = <2>;
};
phy3: phy@3 {
reg = <3>;
interrupt-parent = <&switch_intc>;
interrupts = <3>;
};
phy4: phy@4 {
reg = <4>;
interrupt-parent = <&switch_intc>;
interrupts = <12>;
};
};
};
soc {
flash@30000000 {
/*
@@ -223,10 +317,12 @@
* gpio0bgrp cover line 7 used by WPS LED
* gpio0cgrp cover line 8, 13 used by keys
* and 11, 12 used by the HD LEDs
* and line 14, 15 used by RTL8366
* RESET and phy ready
* gpio0egrp cover line 16 used by VDISP
* gpio0fgrp cover line 17 used by TK IRQ
* gpio0ggrp cover line 20 used by panel CS
* gpio0hgrp cover line 21,22 used by RTL8366RB
* gpio0hgrp cover line 21,22 used by RTL8366RB MDIO
*/
gpio0_default_pins: pinctrl-gpio0 {
mux {
@@ -250,6 +346,32 @@
groups = "gpio1bgrp";
};
};
pinctrl-gmii {
mux {
function = "gmii";
groups = "gmii_gmac0_grp";
};
conf0 {
pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV",
"Y7 GMAC0 RXC", "Y11 GMAC1 RXC",
"T8 GMAC0 TXEN", "W11 GMAC1 TXEN",
"U8 GMAC0 TXC", "V11 GMAC1 TXC",
"W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
"Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
"T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
"V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
"Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
"T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
"U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
"W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
skew-delay = <7>;
};
/* Set up drive strength on GMAC0 to 16 mA */
conf1 {
groups = "gmii_gmac0_grp";
drive-strength = <16>;
};
};
};
};
@@ -291,6 +413,22 @@
<0x6000 0 0 4 &pci_intc 2>;
};
ethernet@60000000 {
status = "okay";
ethernet-port@0 {
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
ethernet-port@1 {
/* Not used in this platform */
};
};
ata@63000000 {
status = "okay";
};

1060
arch/arm/net/bpf_jit_32.c
Ver fichero

La diferencia del archivo ha sido suprimido porque es demasiado grande Cargar Diff

42
arch/arm/net/bpf_jit_32.h
Ver fichero

@@ -77,11 +77,14 @@
#define ARM_INST_EOR_R 0x00200000
#define ARM_INST_EOR_I 0x02200000
#define ARM_INST_LDRB_I 0x05d00000
#define ARM_INST_LDST__U 0x00800000
#define ARM_INST_LDST__IMM12 0x00000fff
#define ARM_INST_LDRB_I 0x05500000
#define ARM_INST_LDRB_R 0x07d00000
#define ARM_INST_LDRH_I 0x01d000b0
#define ARM_INST_LDRD_I 0x014000d0
#define ARM_INST_LDRH_I 0x015000b0
#define ARM_INST_LDRH_R 0x019000b0
#define ARM_INST_LDR_I 0x05900000
#define ARM_INST_LDR_I 0x05100000
#define ARM_INST_LDR_R 0x07900000
#define ARM_INST_LDM 0x08900000
@@ -124,9 +127,10 @@
#define ARM_INST_SBC_R 0x00c00000
#define ARM_INST_SBCS_R 0x00d00000
#define ARM_INST_STR_I 0x05800000
#define ARM_INST_STRB_I 0x05c00000
#define ARM_INST_STRH_I 0x01c000b0
#define ARM_INST_STR_I 0x05000000
#define ARM_INST_STRB_I 0x05400000
#define ARM_INST_STRD_I 0x014000f0
#define ARM_INST_STRH_I 0x014000b0
#define ARM_INST_TST_R 0x01100000
#define ARM_INST_TST_I 0x03100000
@@ -183,17 +187,18 @@
#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm)
#define ARM_EOR_I(rd, rn, imm) _AL3_I(ARM_INST_EOR, rd, rn, imm)
#define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
| ((off) & 0xfff))
#define ARM_LDR_R(rt, rn, rm) (ARM_INST_LDR_R | (rt) << 12 | (rn) << 16 \
#define ARM_LDR_R(rt, rn, rm) (ARM_INST_LDR_R | ARM_INST_LDST__U \
| (rt) << 12 | (rn) << 16 \
| (rm))
#define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
| (off))
#define ARM_LDRB_R(rt, rn, rm) (ARM_INST_LDRB_R | (rt) << 12 | (rn) << 16 \
#define ARM_LDR_R_SI(rt, rn, rm, type, imm) \
(ARM_INST_LDR_R | ARM_INST_LDST__U \
| (rt) << 12 | (rn) << 16 \
| (imm) << 7 | (type) << 5 | (rm))
#define ARM_LDRB_R(rt, rn, rm) (ARM_INST_LDRB_R | ARM_INST_LDST__U \
| (rt) << 12 | (rn) << 16 \
| (rm))
#define ARM_LDRH_I(rt, rn, off) (ARM_INST_LDRH_I | (rt) << 12 | (rn) << 16 \
| (((off) & 0xf0) << 4) | ((off) & 0xf))
#define ARM_LDRH_R(rt, rn, rm) (ARM_INST_LDRH_R | (rt) << 12 | (rn) << 16 \
#define ARM_LDRH_R(rt, rn, rm) (ARM_INST_LDRH_R | ARM_INST_LDST__U \
| (rt) << 12 | (rn) << 16 \
| (rm))
#define ARM_LDM(rn, regs) (ARM_INST_LDM | (rn) << 16 | (regs))
@@ -254,13 +259,6 @@
#define ARM_SUBS_I(rd, rn, imm) _AL3_I(ARM_INST_SUBS, rd, rn, imm)
#define ARM_SBC_I(rd, rn, imm) _AL3_I(ARM_INST_SBC, rd, rn, imm)
#define ARM_STR_I(rt, rn, off) (ARM_INST_STR_I | (rt) << 12 | (rn) << 16 \
| ((off) & 0xfff))
#define ARM_STRH_I(rt, rn, off) (ARM_INST_STRH_I | (rt) << 12 | (rn) << 16 \
| (((off) & 0xf0) << 4) | ((off) & 0xf))
#define ARM_STRB_I(rt, rn, off) (ARM_INST_STRB_I | (rt) << 12 | (rn) << 16 \
| (((off) & 0xf0) << 4) | ((off) & 0xf))
#define ARM_TST_R(rn, rm) _AL3_R(ARM_INST_TST, 0, rn, rm)
#define ARM_TST_I(rn, imm) _AL3_I(ARM_INST_TST, 0, rn, imm)