Merge branch 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - the core has now a lockless variant of i2c_smbus_xfer. Some open
   coded versions of this got removed in drivers. This also enables
   proper SCCB support in regmap.

 - locking got a more precise naming. i2c_{un}lock_adapter() had to go,
   and we know use i2c_lock_bus() consistently with flags like
   I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity.

 - the gpio fault injector got a new delicate testcase

 - the bus recovery procedure got fixed to handle the new testcase
   correctly

 - a new quirk flag for controllers not able to handle zero length
   messages together with driver updates to use it

 - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl
   family S900

 - and a good set of driver improvements and bugfixes

* 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
  i2c: rcar: implement STOP and REP_START according to docs
  i2c: rcar: refactor private flags
  i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value
  i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes
  dt-bindings: i2c: rcar: Add r8a774a1 support
  dt-bindings: i2c: sh_mobile: Add r8a774a1 support
  i2c: imx: Simplify stopped state tracking
  i2c: imx: Fix race condition in dma read
  i2c: pasemi: remove hardcoded bus numbers on smbus
  i2c: designware: Add SPDX license tag
  i2c: designware: Convert to use struct i2c_timings
  i2c: core: Parse SDA hold time from firmware
  i2c: designware-pcidrv: Mark expected switch fall-through
  i2c: amd8111: Mark expected switch fall-through
  i2c: sh_mobile: use core to detect 'no zero length read' quirk
  i2c: xlr: use core to detect 'no zero length' quirk
  i2c: rcar: use core to detect 'no zero length' quirk
  i2c: stu300: use core to detect 'no zero length' quirk
  i2c: pmcmsp: use core to detect 'no zero length' quirk
  i2c: mxs: use core to detect 'no zero length' quirk
  ...

drivers/media/dvb-frontends/af9013.c

@@ -1311,10 +1311,10 @@ static int af9013_wregs(struct i2c_client *client, u8 cmd, u16 reg,
 	memcpy(&buf[3], val, len);
 
 	if (lock)
-		i2c_lock_adapter(client->adapter);
+		i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
 	ret = __i2c_transfer(client->adapter, msg, 1);
 	if (lock)
-		i2c_unlock_adapter(client->adapter);
+		i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
 	if (ret < 0) {
 		goto err;
 	} else if (ret != 1) {
@@ -1352,10 +1352,10 @@ static int af9013_rregs(struct i2c_client *client, u8 cmd, u16 reg,
 	buf[2] = cmd;
 
 	if (lock)
-		i2c_lock_adapter(client->adapter);
+		i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
 	ret = __i2c_transfer(client->adapter, msg, 2);
 	if (lock)
-		i2c_unlock_adapter(client->adapter);
+		i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
 	if (ret < 0) {
 		goto err;
 	} else if (ret != 2) {

drivers/media/dvb-frontends/drxk_hard.c

@@ -213,7 +213,7 @@ static inline u32 log10times100(u32 value)
 
 static int drxk_i2c_lock(struct drxk_state *state)
 {
-	i2c_lock_adapter(state->i2c);
+	i2c_lock_bus(state->i2c, I2C_LOCK_SEGMENT);
 	state->drxk_i2c_exclusive_lock = true;
 
 	return 0;
@@ -224,7 +224,7 @@ static void drxk_i2c_unlock(struct drxk_state *state)
 	if (!state->drxk_i2c_exclusive_lock)
 		return;
 
-	i2c_unlock_adapter(state->i2c);
+	i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);
 	state->drxk_i2c_exclusive_lock = false;
 }
 

drivers/media/dvb-frontends/rtl2830.c

@@ -24,9 +24,9 @@ static int rtl2830_bulk_write(struct i2c_client *client, unsigned int reg,
 	struct rtl2830_dev *dev = i2c_get_clientdata(client);
 	int ret;
 
-	i2c_lock_adapter(client->adapter);
+	i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
 	ret = regmap_bulk_write(dev->regmap, reg, val, val_count);
-	i2c_unlock_adapter(client->adapter);
+	i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
 	return ret;
 }
 
@@ -36,9 +36,9 @@ static int rtl2830_update_bits(struct i2c_client *client, unsigned int reg,
 	struct rtl2830_dev *dev = i2c_get_clientdata(client);
 	int ret;
 
-	i2c_lock_adapter(client->adapter);
+	i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
 	ret = regmap_update_bits(dev->regmap, reg, mask, val);
-	i2c_unlock_adapter(client->adapter);
+	i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
 	return ret;
 }
 
@@ -48,9 +48,9 @@ static int rtl2830_bulk_read(struct i2c_client *client, unsigned int reg,
 	struct rtl2830_dev *dev = i2c_get_clientdata(client);
 	int ret;
 
-	i2c_lock_adapter(client->adapter);
+	i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
 	ret = regmap_bulk_read(dev->regmap, reg, val, val_count);
-	i2c_unlock_adapter(client->adapter);
+	i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
 	return ret;
 }
 

drivers/media/dvb-frontends/tda1004x.c

@@ -329,7 +329,7 @@ static int tda1004x_do_upload(struct tda1004x_state *state,
 	tda1004x_write_byteI(state, dspCodeCounterReg, 0);
 	fw_msg.addr = state->config->demod_address;
 
-	i2c_lock_adapter(state->i2c);
+	i2c_lock_bus(state->i2c, I2C_LOCK_SEGMENT);
 	buf[0] = dspCodeInReg;
 	while (pos != len) {
 		// work out how much to send this time
@@ -342,14 +342,14 @@ static int tda1004x_do_upload(struct tda1004x_state *state,
 		fw_msg.len = tx_size + 1;
 		if (__i2c_transfer(state->i2c, &fw_msg, 1) != 1) {
 			printk(KERN_ERR "tda1004x: Error during firmware upload\n");
-			i2c_unlock_adapter(state->i2c);
+			i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);
 			return -EIO;
 		}
 		pos += tx_size;
 
 		dprintk("%s: fw_pos=0x%x\n", __func__, pos);
 	}
-	i2c_unlock_adapter(state->i2c);
+	i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);
 
 	/* give the DSP a chance to settle 03/10/05 Hac */
 	msleep(100);