xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
派生 0
代码 工单 合并请求 工作流 软件包 项目 发布 百科 活动

Merge branch 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

浏览代码 
* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: include Migo-R TS driver in Migo-R defconfig
  sh: correct definitions to access stack pointers
  sh: Tidy up SH-4A unaligned load support.
  dma: shdma: NMI support.
  sh: mach-sdk7786: Handle baseboard NMI source selection.
  sh: mach-rsk: Add polled GPIO buttons support for RSK+7203.
  sh: Break out cpuinfo_op procfs bits.
  sh: Enable optional gpiolib for all CPUs with pinmux tables.
  sh: migrate SH_CLK_MD to mode pin API.
  sh: machvec IO death.
这个提交包含在：
Linus Torvalds
2011-01-06 13:34:45 -08:00
父节点 abb359450f f862f904d3
当前提交 9858a38ea3
共修改 32 个文件，包含 919 行新增和 764 行删除
下载 Patch 文件 下载 Diff 文件 展开所有文件 折叠所有文件

6
arch/sh/kernel/Makefile
查看文件

@@ -20,6 +20,11 @@ obj-y := clkdev.o debugtraps.o dma-nommu.o dumpstack.o \
syscalls_$(BITS).o time.o topology.o traps.o \
traps_$(BITS).o unwinder.o
ifndef CONFIG_GENERIC_IOMAP
obj-y += iomap.o
obj-$(CONFIG_HAS_IOPORT) += ioport.o
endif
obj-y += cpu/
obj-$(CONFIG_VSYSCALL) += vsyscall/
obj-$(CONFIG_SMP) += smp.o
@@ -39,7 +44,6 @@ obj-$(CONFIG_DUMP_CODE) += disassemble.o
obj-$(CONFIG_HIBERNATION) += swsusp.o
obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o
obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o
obj-$(CONFIG_HAS_IOPORT) += io_generic.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o

2
arch/sh/kernel/cpu/Makefile
查看文件

@@ -20,4 +20,4 @@ obj-$(CONFIG_SH_CLK_CPG_LEGACY) += clock-cpg.o
obj-$(CONFIG_SH_FPU) += fpu.o
obj-$(CONFIG_SH_FPU_EMU) += fpu.o
obj-y += irq/ init.o clock.o hwblk.o
obj-y += irq/ init.o clock.o hwblk.o proc.o

148
arch/sh/kernel/cpu/proc.c 普通文件
查看文件

@@ -0,0 +1,148 @@
#include <linux/seq_file.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/machvec.h>
#include <asm/processor.h>
static const char *cpu_name[] = {
[CPU_SH7201] = "SH7201",
[CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263",
[CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619",
[CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
[CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
[CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
[CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720",
[CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729",
[CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S",
[CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751",
[CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760",
[CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501",
[CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770",
[CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781",
[CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
[CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
[CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724",
[CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(struct sh_cpuinfo *c)
{
return cpu_name[c->type];
}
EXPORT_SYMBOL(get_cpu_subtype);
#ifdef CONFIG_PROC_FS
/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
static const char *cpu_flags[] = {
"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
"ptea", "llsc", "l2", "op32", "pteaex", NULL
};
static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
{
unsigned long i;
seq_printf(m, "cpu flags\t:");
if (!c->flags) {
seq_printf(m, " %s\n", cpu_flags[0]);
return;
}
for (i = 0; cpu_flags[i]; i++)
if ((c->flags & (1 << i)))
seq_printf(m, " %s", cpu_flags[i+1]);
seq_printf(m, "\n");
}
static void show_cacheinfo(struct seq_file *m, const char *type,
struct cache_info info)
{
unsigned int cache_size;
cache_size = info.ways * info.sets * info.linesz;
seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
type, cache_size >> 10, info.ways);
}
/*
* Get CPU information for use by the procfs.
*/
static int show_cpuinfo(struct seq_file *m, void *v)
{
struct sh_cpuinfo *c = v;
unsigned int cpu = c - cpu_data;
if (!cpu_online(cpu))
return 0;
if (cpu == 0)
seq_printf(m, "machine\t\t: %s\n", get_system_type());
else
seq_printf(m, "\n");
seq_printf(m, "processor\t: %d\n", cpu);
seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
if (c->cut_major == -1)
seq_printf(m, "cut\t\t: unknown\n");
else if (c->cut_minor == -1)
seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
else
seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
show_cpuflags(m, c);
seq_printf(m, "cache type\t: ");
/*
* Check for what type of cache we have, we support both the
* unified cache on the SH-2 and SH-3, as well as the harvard
* style cache on the SH-4.
*/
if (c->icache.flags & SH_CACHE_COMBINED) {
seq_printf(m, "unified\n");
show_cacheinfo(m, "cache", c->icache);
} else {
seq_printf(m, "split (harvard)\n");
show_cacheinfo(m, "icache", c->icache);
show_cacheinfo(m, "dcache", c->dcache);
}
/* Optional secondary cache */
if (c->flags & CPU_HAS_L2_CACHE)
show_cacheinfo(m, "scache", c->scache);
seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits);
seq_printf(m, "bogomips\t: %lu.%02lu\n",
c->loops_per_jiffy/(500000/HZ),
(c->loops_per_jiffy/(5000/HZ)) % 100);
return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < NR_CPUS ? cpu_data + *pos : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
{
}
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};
#endif /* CONFIG_PROC_FS */

22
arch/sh/kernel/cpu/sh2/clock-sh7619.c
查看文件

@@ -14,24 +14,18 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <asm/clock.h>
#include <asm/freq.h>
#include <asm/io.h>
#include <asm/processor.h>
static const int pll1rate[] = {1,2};
static const int pfc_divisors[] = {1,2,0,4};
#if (CONFIG_SH_CLK_MD == 1) || (CONFIG_SH_CLK_MD == 2)
#define PLL2 (4)
#elif (CONFIG_SH_CLK_MD == 5) || (CONFIG_SH_CLK_MD == 6)
#define PLL2 (2)
#else
#error "Illigal Clock Mode!"
#endif
static unsigned int pll2_mult;
static void master_clk_init(struct clk *clk)
{
clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
}
static struct clk_ops sh7619_master_clk_ops = {
@@ -70,6 +64,14 @@ static struct clk_ops *sh7619_clk_ops[] = {
void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
{
if (test_mode_pin(MODE_PIN2 | MODE_PIN0) ||
test_mode_pin(MODE_PIN2 | MODE_PIN1))
pll2_mult = 2;
else if (test_mode_pin(MODE_PIN0) || test_mode_pin(MODE_PIN1))
pll2_mult = 4;
BUG_ON(!pll2_mult);
if (idx < ARRAY_SIZE(sh7619_clk_ops))
*ops = sh7619_clk_ops[idx];
}

20
arch/sh/kernel/cpu/sh2a/clock-sh7201.c
查看文件

@@ -22,19 +22,12 @@ static const int pll1rate[]={1,2,3,4,6,8};
static const int pfc_divisors[]={1,2,3,4,6,8,12};
#define ifc_divisors pfc_divisors
#if (CONFIG_SH_CLK_MD == 0)
#define PLL2 (4)
#elif (CONFIG_SH_CLK_MD == 2)
#define PLL2 (2)
#elif (CONFIG_SH_CLK_MD == 3)
#define PLL2 (1)
#else
#error "Illegal Clock Mode!"
#endif
static unsigned int pll2_mult;
static void master_clk_init(struct clk *clk)
{
clk->rate = 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
clk->rate = 10000000 * pll2_mult *
pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7201_master_clk_ops = {
@@ -80,6 +73,13 @@ static struct clk_ops *sh7201_clk_ops[] = {
void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
{
if (test_mode_pin(MODE_PIN1 | MODE_PIN0))
pll2_mult = 1;
else if (test_mode_pin(MODE_PIN1))
pll2_mult = 2;
else
pll2_mult = 4;
if (idx < ARRAY_SIZE(sh7201_clk_ops))
*ops = sh7201_clk_ops[idx];
}

21
arch/sh/kernel/cpu/sh2a/clock-sh7203.c
查看文件

@@ -25,21 +25,11 @@ static const int pll1rate[]={8,12,16,0};
static const int pfc_divisors[]={1,2,3,4,6,8,12};
#define ifc_divisors pfc_divisors
#if (CONFIG_SH_CLK_MD == 0)
#define PLL2 (1)
#elif (CONFIG_SH_CLK_MD == 1)
#define PLL2 (2)
#elif (CONFIG_SH_CLK_MD == 2)
#define PLL2 (4)
#elif (CONFIG_SH_CLK_MD == 3)
#define PLL2 (4)
#else
#error "Illegal Clock Mode!"
#endif
static unsigned int pll2_mult;
static void master_clk_init(struct clk *clk)
{
clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * PLL2 ;
clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult;
}
static struct clk_ops sh7203_master_clk_ops = {
@@ -79,6 +69,13 @@ static struct clk_ops *sh7203_clk_ops[] = {
void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
{
if (test_mode_pin(MODE_PIN1))
pll2_mult = 4;
else if (test_mode_pin(MODE_PIN0))
pll2_mult = 2;
else
pll2_mult = 1;
if (idx < ARRAY_SIZE(sh7203_clk_ops))
*ops = sh7203_clk_ops[idx];
}

20
arch/sh/kernel/cpu/sh2a/clock-sh7206.c
查看文件

@@ -22,19 +22,11 @@ static const int pll1rate[]={1,2,3,4,6,8};
static const int pfc_divisors[]={1,2,3,4,6,8,12};
#define ifc_divisors pfc_divisors
#if (CONFIG_SH_CLK_MD == 2)
#define PLL2 (4)
#elif (CONFIG_SH_CLK_MD == 6)
#define PLL2 (2)
#elif (CONFIG_SH_CLK_MD == 7)
#define PLL2 (1)
#else
#error "Illigal Clock Mode!"
#endif
static unsigned int pll2_mult;
static void master_clk_init(struct clk *clk)
{
clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7206_master_clk_ops = {
@@ -79,7 +71,13 @@ static struct clk_ops *sh7206_clk_ops[] = {
void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
{
if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0))
pll2_mult = 1;
else if (test_mode_pin(MODE_PIN2 | MODE_PIN1))
pll2_mult = 2;
else if (test_mode_pin(MODE_PIN1))
pll2_mult = 4;
if (idx < ARRAY_SIZE(sh7206_clk_ops))
*ops = sh7206_clk_ops[idx];
}

180
arch/sh/kernel/io_generic.c
查看文件

@@ -1,180 +0,0 @@
/*
* arch/sh/kernel/io_generic.c
*
* Copyright (C) 2000 Niibe Yutaka
* Copyright (C) 2005 - 2007 Paul Mundt
*
* Generic I/O routine. These can be used where a machine specific version
* is not required.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/module.h>
#include <linux/io.h>
#include <asm/machvec.h>
#ifdef CONFIG_CPU_SH3
/* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a
* workaround. */
/* I'm not sure SH7709 has this kind of bug */
#define dummy_read() __raw_readb(0xba000000)
#else
#define dummy_read()
#endif
unsigned long generic_io_base = 0;
u8 generic_inb(unsigned long port)
{
return __raw_readb(__ioport_map(port, 1));
}
u16 generic_inw(unsigned long port)
{
return __raw_readw(__ioport_map(port, 2));
}
u32 generic_inl(unsigned long port)
{
return __raw_readl(__ioport_map(port, 4));
}
u8 generic_inb_p(unsigned long port)
{
unsigned long v = generic_inb(port);
ctrl_delay();
return v;
}
u16 generic_inw_p(unsigned long port)
{
unsigned long v = generic_inw(port);
ctrl_delay();
return v;
}
u32 generic_inl_p(unsigned long port)
{
unsigned long v = generic_inl(port);
ctrl_delay();
return v;
}
/*
* insb/w/l all read a series of bytes/words/longs from a fixed port
* address. However as the port address doesn't change we only need to
* convert the port address to real address once.
*/
void generic_insb(unsigned long port, void *dst, unsigned long count)
{
__raw_readsb(__ioport_map(port, 1), dst, count);
dummy_read();
}
void generic_insw(unsigned long port, void *dst, unsigned long count)
{
__raw_readsw(__ioport_map(port, 2), dst, count);
dummy_read();
}
void generic_insl(unsigned long port, void *dst, unsigned long count)
{
__raw_readsl(__ioport_map(port, 4), dst, count);
dummy_read();
}
void generic_outb(u8 b, unsigned long port)
{
__raw_writeb(b, __ioport_map(port, 1));
}
void generic_outw(u16 b, unsigned long port)
{
__raw_writew(b, __ioport_map(port, 2));
}
void generic_outl(u32 b, unsigned long port)
{
__raw_writel(b, __ioport_map(port, 4));
}
void generic_outb_p(u8 b, unsigned long port)
{
generic_outb(b, port);
ctrl_delay();
}
void generic_outw_p(u16 b, unsigned long port)
{
generic_outw(b, port);
ctrl_delay();
}
void generic_outl_p(u32 b, unsigned long port)
{
generic_outl(b, port);
ctrl_delay();
}
/*
* outsb/w/l all write a series of bytes/words/longs to a fixed port
* address. However as the port address doesn't change we only need to
* convert the port address to real address once.
*/
void generic_outsb(unsigned long port, const void *src, unsigned long count)
{
__raw_writesb(__ioport_map(port, 1), src, count);
dummy_read();
}
void generic_outsw(unsigned long port, const void *src, unsigned long count)
{
__raw_writesw(__ioport_map(port, 2), src, count);
dummy_read();
}
void generic_outsl(unsigned long port, const void *src, unsigned long count)
{
__raw_writesl(__ioport_map(port, 4), src, count);
dummy_read();
}
void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
{
#ifdef P1SEG
if (PXSEG(addr) >= P1SEG)
return (void __iomem *)addr;
#endif
return (void __iomem *)(addr + generic_io_base);
}
void generic_ioport_unmap(void __iomem *addr)
{
}
#ifndef CONFIG_GENERIC_IOMAP
void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
void __iomem *ret;
ret = __ioport_map_trapped(port, nr);
if (ret)
return ret;
return __ioport_map(port, nr);
}
EXPORT_SYMBOL(ioport_map);
void ioport_unmap(void __iomem *addr)
{
sh_mv.mv_ioport_unmap(addr);
}
EXPORT_SYMBOL(ioport_unmap);
#endif /* CONFIG_GENERIC_IOMAP */

165
arch/sh/kernel/iomap.c 普通文件
查看文件

@@ -0,0 +1,165 @@
/*
* arch/sh/kernel/iomap.c
*
* Copyright (C) 2000 Niibe Yutaka
* Copyright (C) 2005 - 2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/module.h>
#include <linux/io.h>
unsigned int ioread8(void __iomem *addr)
{
return readb(addr);
}
EXPORT_SYMBOL(ioread8);
unsigned int ioread16(void __iomem *addr)
{
return readw(addr);
}
EXPORT_SYMBOL(ioread16);
unsigned int ioread16be(void __iomem *addr)
{
return be16_to_cpu(__raw_readw(addr));
}
EXPORT_SYMBOL(ioread16be);
unsigned int ioread32(void __iomem *addr)
{
return readl(addr);
}
EXPORT_SYMBOL(ioread32);
unsigned int ioread32be(void __iomem *addr)
{
return be32_to_cpu(__raw_readl(addr));
}
EXPORT_SYMBOL(ioread32be);
void iowrite8(u8 val, void __iomem *addr)
{
writeb(val, addr);
}
EXPORT_SYMBOL(iowrite8);
void iowrite16(u16 val, void __iomem *addr)
{
writew(val, addr);
}
EXPORT_SYMBOL(iowrite16);
void iowrite16be(u16 val, void __iomem *addr)
{
__raw_writew(cpu_to_be16(val), addr);
}
EXPORT_SYMBOL(iowrite16be);
void iowrite32(u32 val, void __iomem *addr)
{
writel(val, addr);
}
EXPORT_SYMBOL(iowrite32);
void iowrite32be(u32 val, void __iomem *addr)
{
__raw_writel(cpu_to_be32(val), addr);
}
EXPORT_SYMBOL(iowrite32be);
/*
* These are the "repeat MMIO read/write" functions.
* Note the "__raw" accesses, since we don't want to
* convert to CPU byte order. We write in "IO byte
* order" (we also don't have IO barriers).
*/
static inline void mmio_insb(void __iomem *addr, u8 *dst, int count)
{
while (--count >= 0) {
u8 data = __raw_readb(addr);
*dst = data;
dst++;
}
}
static inline void mmio_insw(void __iomem *addr, u16 *dst, int count)
{
while (--count >= 0) {
u16 data = __raw_readw(addr);
*dst = data;
dst++;
}
}
static inline void mmio_insl(void __iomem *addr, u32 *dst, int count)
{
while (--count >= 0) {
u32 data = __raw_readl(addr);
*dst = data;
dst++;
}
}
static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
{
while (--count >= 0) {
__raw_writeb(*src, addr);
src++;
}
}
static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
{
while (--count >= 0) {
__raw_writew(*src, addr);
src++;
}
}
static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
{
while (--count >= 0) {
__raw_writel(*src, addr);
src++;
}
}
void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
{
mmio_insb(addr, dst, count);
}
EXPORT_SYMBOL(ioread8_rep);
void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
{
mmio_insw(addr, dst, count);
}
EXPORT_SYMBOL(ioread16_rep);
void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
{
mmio_insl(addr, dst, count);
}
EXPORT_SYMBOL(ioread32_rep);
void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
{
mmio_outsb(addr, src, count);
}
EXPORT_SYMBOL(iowrite8_rep);
void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
{
mmio_outsw(addr, src, count);
}
EXPORT_SYMBOL(iowrite16_rep);
void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
{
mmio_outsl(addr, src, count);
}
EXPORT_SYMBOL(iowrite32_rep);

43
arch/sh/kernel/ioport.c 普通文件
查看文件

@@ -0,0 +1,43 @@
/*
* arch/sh/kernel/ioport.c
*
* Copyright (C) 2000 Niibe Yutaka
* Copyright (C) 2005 - 2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/module.h>
#include <linux/io.h>
const unsigned long sh_io_port_base __read_mostly = -1;
EXPORT_SYMBOL(sh_io_port_base);
void __iomem *__ioport_map(unsigned long addr, unsigned int size)
{
if (sh_mv.mv_ioport_map)
return sh_mv.mv_ioport_map(addr, size);
return (void __iomem *)(addr + sh_io_port_base);
}
EXPORT_SYMBOL(__ioport_map);
void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
void __iomem *ret;
ret = __ioport_map_trapped(port, nr);
if (ret)
return ret;
return __ioport_map(port, nr);
}
EXPORT_SYMBOL(ioport_map);
void ioport_unmap(void __iomem *addr)
{
if (sh_mv.mv_ioport_unmap)
sh_mv.mv_ioport_unmap(addr);
}
EXPORT_SYMBOL(ioport_unmap);

22
arch/sh/kernel/machvec.c
查看文件

@@ -118,28 +118,6 @@ void __init sh_mv_setup(void)
sh_mv.mv_##elem = generic_##elem; \
} while (0)
#ifdef CONFIG_HAS_IOPORT
#ifdef P2SEG
__set_io_port_base(P2SEG);
#else
__set_io_port_base(0);
#endif
mv_set(inb); mv_set(inw); mv_set(inl);
mv_set(outb); mv_set(outw); mv_set(outl);
mv_set(inb_p); mv_set(inw_p); mv_set(inl_p);
mv_set(outb_p); mv_set(outw_p); mv_set(outl_p);
mv_set(insb); mv_set(insw); mv_set(insl);
mv_set(outsb); mv_set(outsw); mv_set(outsl);
mv_set(ioport_map);
mv_set(ioport_unmap);
#endif
mv_set(irq_demux);
mv_set(mode_pins);
mv_set(mem_init);

144
arch/sh/kernel/setup.c
查看文件

@@ -12,7 +12,6 @@
#include <linux/initrd.h>
#include <linux/bootmem.h>
#include <linux/console.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/utsname.h>
#include <linux/nodemask.h>
@@ -319,146 +318,3 @@ int test_mode_pin(int pin)
{
return sh_mv.mv_mode_pins() & pin;
}
static const char *cpu_name[] = {
[CPU_SH7201] = "SH7201",
[CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263",
[CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619",
[CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
[CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
[CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
[CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720",
[CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729",
[CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S",
[CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751",
[CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760",
[CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501",
[CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770",
[CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781",
[CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
[CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
[CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724",
[CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(struct sh_cpuinfo *c)
{
return cpu_name[c->type];
}
EXPORT_SYMBOL(get_cpu_subtype);
#ifdef CONFIG_PROC_FS
/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
static const char *cpu_flags[] = {
"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
"ptea", "llsc", "l2", "op32", "pteaex", NULL
};
static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
{
unsigned long i;
seq_printf(m, "cpu flags\t:");
if (!c->flags) {
seq_printf(m, " %s\n", cpu_flags[0]);
return;
}
for (i = 0; cpu_flags[i]; i++)
if ((c->flags & (1 << i)))
seq_printf(m, " %s", cpu_flags[i+1]);
seq_printf(m, "\n");
}
static void show_cacheinfo(struct seq_file *m, const char *type,
struct cache_info info)
{
unsigned int cache_size;
cache_size = info.ways * info.sets * info.linesz;
seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
type, cache_size >> 10, info.ways);
}
/*
* Get CPU information for use by the procfs.
*/
static int show_cpuinfo(struct seq_file *m, void *v)
{
struct sh_cpuinfo *c = v;
unsigned int cpu = c - cpu_data;
if (!cpu_online(cpu))
return 0;
if (cpu == 0)
seq_printf(m, "machine\t\t: %s\n", get_system_type());
else
seq_printf(m, "\n");
seq_printf(m, "processor\t: %d\n", cpu);
seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
if (c->cut_major == -1)
seq_printf(m, "cut\t\t: unknown\n");
else if (c->cut_minor == -1)
seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
else
seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
show_cpuflags(m, c);
seq_printf(m, "cache type\t: ");
/*
* Check for what type of cache we have, we support both the
* unified cache on the SH-2 and SH-3, as well as the harvard
* style cache on the SH-4.
*/
if (c->icache.flags & SH_CACHE_COMBINED) {
seq_printf(m, "unified\n");
show_cacheinfo(m, "cache", c->icache);
} else {
seq_printf(m, "split (harvard)\n");
show_cacheinfo(m, "icache", c->icache);
show_cacheinfo(m, "dcache", c->dcache);
}
/* Optional secondary cache */
if (c->flags & CPU_HAS_L2_CACHE)
show_cacheinfo(m, "scache", c->scache);
seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits);
seq_printf(m, "bogomips\t: %lu.%02lu\n",
c->loops_per_jiffy/(500000/HZ),
(c->loops_per_jiffy/(5000/HZ)) % 100);
return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < NR_CPUS ? cpu_data + *pos : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
{
}
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};
#endif /* CONFIG_PROC_FS */