MIPS: Netlogic: Split reset code out of smpboot.S
The reset and core initialization code should be available for uniprocessor as well. This changes is just to take out the code into a different file, without any change to the logic. The change for uniprocessor initialization code is in a later patch. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5423/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Jayachandran C
committed by
Ralf Baechle
Ralf Baechle
parent
aceee09d4f
commit
9584c55a5c
@@ -50,197 +50,12 @@
|
||||
#include <asm/netlogic/xlp-hal/cpucontrol.h>
|
||||
|
||||
#define CP0_EBASE $15
|
||||
#define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
|
||||
XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
|
||||
SYS_CPU_NONCOHERENT_MODE * 4
|
||||
|
||||
#define XLP_AX_WORKAROUND /* enable Ax silicon workarounds */
|
||||
|
||||
/* Enable XLP features and workarounds in the LSU */
|
||||
.macro xlp_config_lsu
|
||||
li t0, LSU_DEFEATURE
|
||||
mfcr t1, t0
|
||||
|
||||
lui t2, 0xc080 /* SUE, Enable Unaligned Access, L2HPE */
|
||||
or t1, t1, t2
|
||||
#ifdef XLP_AX_WORKAROUND
|
||||
li t2, ~0xe /* S1RCM */
|
||||
and t1, t1, t2
|
||||
#endif
|
||||
mtcr t1, t0
|
||||
|
||||
li t0, ICU_DEFEATURE
|
||||
mfcr t1, t0
|
||||
ori t1, 0x1000 /* Enable Icache partitioning */
|
||||
mtcr t1, t0
|
||||
|
||||
|
||||
#ifdef XLP_AX_WORKAROUND
|
||||
li t0, SCHED_DEFEATURE
|
||||
lui t1, 0x0100 /* Disable BRU accepting ALU ops */
|
||||
mtcr t1, t0
|
||||
#endif
|
||||
.endm
|
||||
|
||||
/*
|
||||
* This is the code that will be copied to the reset entry point for
|
||||
* XLR and XLP. The XLP cores start here when they are woken up. This
|
||||
* is also the NMI entry point.
|
||||
*/
|
||||
.macro xlp_flush_l1_dcache
|
||||
li t0, LSU_DEBUG_DATA0
|
||||
li t1, LSU_DEBUG_ADDR
|
||||
li t2, 0 /* index */
|
||||
li t3, 0x1000 /* loop count */
|
||||
1:
|
||||
sll v0, t2, 5
|
||||
mtcr zero, t0
|
||||
ori v1, v0, 0x3 /* way0 | write_enable | write_active */
|
||||
mtcr v1, t1
|
||||
2:
|
||||
mfcr v1, t1
|
||||
andi v1, 0x1 /* wait for write_active == 0 */
|
||||
bnez v1, 2b
|
||||
nop
|
||||
mtcr zero, t0
|
||||
ori v1, v0, 0x7 /* way1 | write_enable | write_active */
|
||||
mtcr v1, t1
|
||||
3:
|
||||
mfcr v1, t1
|
||||
andi v1, 0x1 /* wait for write_active == 0 */
|
||||
bnez v1, 3b
|
||||
nop
|
||||
addi t2, 1
|
||||
bne t3, t2, 1b
|
||||
nop
|
||||
.endm
|
||||
|
||||
/*
|
||||
* The cores can come start when they are woken up. This is also the NMI
|
||||
* entry, so check that first.
|
||||
*
|
||||
* The data corresponding to reset/NMI is stored at RESET_DATA_PHYS
|
||||
* location, this will have the thread mask (used when core is woken up)
|
||||
* and the current NMI handler in case we reached here for an NMI.
|
||||
*
|
||||
* When a core or thread is newly woken up, it loops in a 'wait'. When
|
||||
* the CPU really needs waking up, we send an NMI to it, with the NMI
|
||||
* handler set to prom_boot_secondary_cpus
|
||||
*/
|
||||
|
||||
.set noreorder
|
||||
.set noat
|
||||
.set arch=xlr /* for mfcr/mtcr, XLR is sufficient */
|
||||
|
||||
FEXPORT(nlm_reset_entry)
|
||||
dmtc0 k0, $22, 6
|
||||
dmtc0 k1, $22, 7
|
||||
mfc0 k0, CP0_STATUS
|
||||
li k1, 0x80000
|
||||
and k1, k0, k1
|
||||
beqz k1, 1f /* go to real reset entry */
|
||||
nop
|
||||
li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
|
||||
ld k0, BOOT_NMI_HANDLER(k1)
|
||||
jr k0
|
||||
nop
|
||||
|
||||
1: /* Entry point on core wakeup */
|
||||
mfc0 t0, CP0_EBASE, 1
|
||||
mfc0 t1, CP0_EBASE, 1
|
||||
srl t1, 5
|
||||
andi t1, 0x3 /* t1 <- node */
|
||||
li t2, 0x40000
|
||||
mul t3, t2, t1 /* t3 = node * 0x40000 */
|
||||
srl t0, t0, 2
|
||||
and t0, t0, 0x7 /* t0 <- core */
|
||||
li t1, 0x1
|
||||
sll t0, t1, t0
|
||||
nor t0, t0, zero /* t0 <- ~(1 << core) */
|
||||
li t2, SYS_CPU_COHERENT_BASE(0)
|
||||
add t2, t2, t3 /* t2 <- SYS offset for node */
|
||||
lw t1, 0(t2)
|
||||
and t1, t1, t0
|
||||
sw t1, 0(t2)
|
||||
|
||||
/* read back to ensure complete */
|
||||
lw t1, 0(t2)
|
||||
sync
|
||||
|
||||
/* Configure LSU on Non-0 Cores. */
|
||||
xlp_config_lsu
|
||||
/* FALL THROUGH */
|
||||
|
||||
/*
|
||||
* Wake up sibling threads from the initial thread in
|
||||
* a core.
|
||||
*/
|
||||
EXPORT(nlm_boot_siblings)
|
||||
/* core L1D flush before enable threads */
|
||||
xlp_flush_l1_dcache
|
||||
/* Enable hw threads by writing to MAP_THREADMODE of the core */
|
||||
li t0, CKSEG1ADDR(RESET_DATA_PHYS)
|
||||
lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */
|
||||
li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
|
||||
mfcr t2, t0
|
||||
or t2, t2, t1
|
||||
mtcr t2, t0
|
||||
|
||||
/*
|
||||
* The new hardware thread starts at the next instruction
|
||||
* For all the cases other than core 0 thread 0, we will
|
||||
* jump to the secondary wait function.
|
||||
*/
|
||||
mfc0 v0, CP0_EBASE, 1
|
||||
andi v0, 0x3ff /* v0 <- node/core */
|
||||
|
||||
/* Init MMU in the first thread after changing THREAD_MODE
|
||||
* register (Ax Errata?)
|
||||
*/
|
||||
andi v1, v0, 0x3 /* v1 <- thread id */
|
||||
bnez v1, 2f
|
||||
nop
|
||||
|
||||
li t0, MMU_SETUP
|
||||
li t1, 0
|
||||
mtcr t1, t0
|
||||
_ehb
|
||||
|
||||
2: beqz v0, 4f /* boot cpu (cpuid == 0)? */
|
||||
nop
|
||||
|
||||
/* setup status reg */
|
||||
move t1, zero
|
||||
#ifdef CONFIG_64BIT
|
||||
ori t1, ST0_KX
|
||||
#endif
|
||||
mtc0 t1, CP0_STATUS
|
||||
/* mark CPU ready */
|
||||
PTR_LA t1, nlm_cpu_ready
|
||||
sll v1, v0, 2
|
||||
PTR_ADDU t1, v1
|
||||
li t2, 1
|
||||
sw t2, 0(t1)
|
||||
/* Wait until NMI hits */
|
||||
3: wait
|
||||
j 3b
|
||||
nop
|
||||
|
||||
/*
|
||||
* For the boot CPU, we have to restore registers and
|
||||
* return
|
||||
*/
|
||||
4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */
|
||||
li t1, 0xfadebeef
|
||||
dmtc0 t1, $4, 2 /* restore SP from UserLocal */
|
||||
PTR_SUBU sp, t0, PT_SIZE
|
||||
RESTORE_ALL
|
||||
jr ra
|
||||
nop
|
||||
EXPORT(nlm_reset_entry_end)
|
||||
.set arch=xlr /* for mfcr/mtcr, XLR is sufficient */
|
||||
|
||||
FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */
|
||||
xlp_config_lsu
|
||||
dmtc0 sp, $4, 2 /* SP saved in UserLocal */
|
||||
SAVE_ALL
|
||||
sync
|
||||
|
||||
Reference in New Issue
Block a user