leds-lp55xx: clean up init_device() in lp5521/5523

To make _probe() simple, device initialization code is moved to
 _init_device() at each driver.
 This patch is a preceding step for lp55xx common driver architecture.

 leds-lp5521:
 When 'lp5521_init_device()' gets failed, error handling should be 'fail1'
 rather than 'fail2'.
   fail1: releasing platform resource and return code
   fail2: releasing allocated LED devices with handling 'fail1'
 The 'lp5521_init_device()' is called before creating LED devices.
 Thus, 'goto fail1' is proper error handler of this function.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

drivers/leds/leds-lp5523.c

@@ -896,6 +896,33 @@ static int lp5523_init_led(struct lp5523_led *led, struct device *dev,
 	return 0;
 }
 
+static int lp5523_init_device(struct lp5523_chip *chip)
+{
+	struct lp5523_platform_data *pdata = chip->pdata;
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	if (pdata->setup_resources) {
+		ret = pdata->setup_resources();
+		if (ret < 0)
+			return ret;
+	}
+
+	if (pdata->enable) {
+		pdata->enable(0);
+		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
+		pdata->enable(1);
+		usleep_range(1000, 2000); /* 500us abs min. */
+	}
+
+	lp5523_write(client, LP5523_REG_RESET, 0xff);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
+	return lp5523_detect(client);
+}
+
 static int lp5523_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@@ -921,25 +948,7 @@ static int lp5523_probe(struct i2c_client *client,
 
 	chip->pdata   = pdata;
 
-	if (pdata->setup_resources) {
-		ret = pdata->setup_resources();
-		if (ret < 0)
-			return ret;
-	}
-
-	if (pdata->enable) {
-		pdata->enable(0);
-		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
-		pdata->enable(1);
-		usleep_range(1000, 2000); /* 500us abs min. */
-	}
-
-	lp5523_write(client, LP5523_REG_RESET, 0xff);
-	usleep_range(10000, 20000); /*
-				     * Exact value is not available. 10 - 20ms
-				     * appears to be enough for reset.
-				     */
-	ret = lp5523_detect(client);
+	ret = lp5523_init_device(chip);
 	if (ret)
 		goto fail1;