sh: Kill off the rest of the legacy rtc mess.
With the new RTC class driver, we can get rid of most of the old left over cruft. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
此提交包含在:
@@ -8,6 +8,5 @@ obj-$(CONFIG_CPU_SH2) += sh2/
|
||||
obj-$(CONFIG_CPU_SH3) += sh3/
|
||||
obj-$(CONFIG_CPU_SH4) += sh4/
|
||||
|
||||
obj-$(CONFIG_SH_RTC) += rtc.o
|
||||
obj-$(CONFIG_UBC_WAKEUP) += ubc.o
|
||||
obj-$(CONFIG_SH_ADC) += adc.o
|
||||
|
@@ -124,7 +124,7 @@ void __init init_IRQ(void)
|
||||
#ifndef CONFIG_CPU_SUBTYPE_SH7780
|
||||
make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY);
|
||||
make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY);
|
||||
#if defined(CONFIG_SH_RTC)
|
||||
#ifdef RTC_IRQ
|
||||
make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY);
|
||||
#endif
|
||||
|
||||
|
@@ -1,128 +0,0 @@
|
||||
/*
|
||||
* linux/arch/sh/kernel/rtc.c -- SH3 / SH4 on-chip RTC support
|
||||
*
|
||||
* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
|
||||
* Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/time.h>
|
||||
#include <linux/bcd.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/rtc.h>
|
||||
|
||||
void sh_rtc_gettimeofday(struct timespec *ts)
|
||||
{
|
||||
unsigned int sec128, sec, sec2, min, hr, wk, day, mon, yr, yr100, cf_bit;
|
||||
unsigned long flags;
|
||||
|
||||
again:
|
||||
do {
|
||||
local_irq_save(flags);
|
||||
ctrl_outb(0, RCR1); /* Clear CF-bit */
|
||||
sec128 = ctrl_inb(R64CNT);
|
||||
sec = ctrl_inb(RSECCNT);
|
||||
min = ctrl_inb(RMINCNT);
|
||||
hr = ctrl_inb(RHRCNT);
|
||||
wk = ctrl_inb(RWKCNT);
|
||||
day = ctrl_inb(RDAYCNT);
|
||||
mon = ctrl_inb(RMONCNT);
|
||||
#if defined(CONFIG_CPU_SH4)
|
||||
yr = ctrl_inw(RYRCNT);
|
||||
yr100 = (yr >> 8);
|
||||
yr &= 0xff;
|
||||
#else
|
||||
yr = ctrl_inb(RYRCNT);
|
||||
yr100 = (yr == 0x99) ? 0x19 : 0x20;
|
||||
#endif
|
||||
sec2 = ctrl_inb(R64CNT);
|
||||
cf_bit = ctrl_inb(RCR1) & RCR1_CF;
|
||||
local_irq_restore(flags);
|
||||
} while (cf_bit != 0 || ((sec128 ^ sec2) & RTC_BIT_INVERTED) != 0);
|
||||
|
||||
BCD_TO_BIN(yr100);
|
||||
BCD_TO_BIN(yr);
|
||||
BCD_TO_BIN(mon);
|
||||
BCD_TO_BIN(day);
|
||||
BCD_TO_BIN(hr);
|
||||
BCD_TO_BIN(min);
|
||||
BCD_TO_BIN(sec);
|
||||
|
||||
if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
|
||||
hr > 23 || min > 59 || sec > 59) {
|
||||
printk(KERN_ERR
|
||||
"SH RTC: invalid value, resetting to 1 Jan 2000\n");
|
||||
local_irq_save(flags);
|
||||
ctrl_outb(RCR2_RESET, RCR2); /* Reset & Stop */
|
||||
ctrl_outb(0, RSECCNT);
|
||||
ctrl_outb(0, RMINCNT);
|
||||
ctrl_outb(0, RHRCNT);
|
||||
ctrl_outb(6, RWKCNT);
|
||||
ctrl_outb(1, RDAYCNT);
|
||||
ctrl_outb(1, RMONCNT);
|
||||
#if defined(CONFIG_CPU_SH4)
|
||||
ctrl_outw(0x2000, RYRCNT);
|
||||
#else
|
||||
ctrl_outb(0, RYRCNT);
|
||||
#endif
|
||||
ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start */
|
||||
goto again;
|
||||
}
|
||||
|
||||
#if RTC_BIT_INVERTED != 0
|
||||
if ((sec128 & RTC_BIT_INVERTED))
|
||||
sec--;
|
||||
#endif
|
||||
|
||||
ts->tv_sec = mktime(yr100 * 100 + yr, mon, day, hr, min, sec);
|
||||
ts->tv_nsec = ((sec128 * 1000000) / 128) * 1000;
|
||||
}
|
||||
|
||||
/*
|
||||
* Changed to only care about tv_sec, and not the full timespec struct
|
||||
* (i.e. tv_nsec). It can easily be switched to timespec for future cpus
|
||||
* that support setting usec or nsec RTC values.
|
||||
*/
|
||||
int sh_rtc_settimeofday(const time_t secs)
|
||||
{
|
||||
int retval = 0;
|
||||
int real_seconds, real_minutes, cmos_minutes;
|
||||
unsigned long flags;
|
||||
|
||||
local_irq_save(flags);
|
||||
ctrl_outb(RCR2_RESET, RCR2); /* Reset pre-scaler & stop RTC */
|
||||
|
||||
cmos_minutes = ctrl_inb(RMINCNT);
|
||||
BCD_TO_BIN(cmos_minutes);
|
||||
|
||||
/*
|
||||
* since we're only adjusting minutes and seconds,
|
||||
* don't interfere with hour overflow. This avoids
|
||||
* messing with unknown time zones but requires your
|
||||
* RTC not to be off by more than 15 minutes
|
||||
*/
|
||||
real_seconds = secs % 60;
|
||||
real_minutes = secs / 60;
|
||||
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
|
||||
real_minutes += 30; /* correct for half hour time zone */
|
||||
real_minutes %= 60;
|
||||
|
||||
if (abs(real_minutes - cmos_minutes) < 30) {
|
||||
BIN_TO_BCD(real_seconds);
|
||||
BIN_TO_BCD(real_minutes);
|
||||
ctrl_outb(real_seconds, RSECCNT);
|
||||
ctrl_outb(real_minutes, RMINCNT);
|
||||
} else {
|
||||
printk(KERN_WARNING
|
||||
"set_rtc_time: can't update from %d to %d\n",
|
||||
cmos_minutes, real_minutes);
|
||||
retval = -1;
|
||||
}
|
||||
|
||||
ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start RTC */
|
||||
local_irq_restore(flags);
|
||||
|
||||
return retval;
|
||||
}
|
新增問題並參考
封鎖使用者