Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Increase default nodes shift to 10, nr_cpus to 1024
  [IA64] remove redundant local_irq_save() calls from sn_sal.h
  [IA64] panic if topology_init kzalloc fails
  [IA64-SGI] Silent data corruption caused by XPC V2.

arch/ia64/Kconfig

@@ -258,7 +258,7 @@ config NR_CPUS
 	int "Maximum number of CPUs (2-1024)"
 	range 2 1024
 	depends on SMP
-	default "64"
+	default "1024"
 	help
 	  You should set this to the number of CPUs in your system, but
 	  keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
@@ -354,7 +354,7 @@ config NUMA
 config NODES_SHIFT
 	int "Max num nodes shift(3-10)"
 	range 3 10
-	default "8"
+	default "10"
 	depends on NEED_MULTIPLE_NODES
 	help
 	  This option specifies the maximum number of nodes in your SSI system.

arch/ia64/kernel/topology.c

@@ -67,10 +67,8 @@ static int __init topology_init(void)
 #endif
 
 	sysfs_cpus = kzalloc(sizeof(struct ia64_cpu) * NR_CPUS, GFP_KERNEL);
-	if (!sysfs_cpus) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!sysfs_cpus)
+		panic("kzalloc in topology_init failed - NR_CPUS too big?");
 
 	for_each_present_cpu(i) {
 		if((err = arch_register_cpu(i)))

arch/ia64/sn/kernel/xpc_channel.c

@@ -279,8 +279,8 @@ xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst,
 		return part->reason;
 	}
 
-	bte_ret = xp_bte_copy((u64) src, (u64) ia64_tpa((u64) dst),
-				(u64) cnt, (BTE_NORMAL | BTE_WACQUIRE), NULL);
+	bte_ret = xp_bte_copy((u64) src, (u64) dst, (u64) cnt,
+					(BTE_NORMAL | BTE_WACQUIRE), NULL);
 	if (bte_ret == BTE_SUCCESS) {
 		return xpcSuccess;
 	}

arch/ia64/sn/kernel/xpc_main.c

@@ -1052,6 +1052,8 @@ xpc_do_exit(enum xpc_retval reason)
 	if (xpc_sysctl) {
 		unregister_sysctl_table(xpc_sysctl);
 	}
+
+	kfree(xpc_remote_copy_buffer_base);
 }
 
 
@@ -1212,24 +1214,20 @@ xpc_init(void)
 	partid_t partid;
 	struct xpc_partition *part;
 	pid_t pid;
+	size_t buf_size;
 
 
 	if (!ia64_platform_is("sn2")) {
 		return -ENODEV;
 	}
 
-	/*
-	 * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng
-	 * various portions of a partition's reserved page. Its size is based
-	 * on the size of the reserved page header and part_nasids mask. So we
-	 * need to ensure that the other items will fit as well.
-	 */
-	if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) {
-		dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n");
-		return -EPERM;
-	}
-	DBUG_ON((u64) xpc_remote_copy_buffer !=
-				L1_CACHE_ALIGN((u64) xpc_remote_copy_buffer));
+
+	buf_size = max(XPC_RP_VARS_SIZE,
+				XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
+	xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
+				     GFP_KERNEL, &xpc_remote_copy_buffer_base);
+	if (xpc_remote_copy_buffer == NULL)
+		return -ENOMEM;
 
 	snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
 	snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
@@ -1293,6 +1291,8 @@ xpc_init(void)
 		if (xpc_sysctl) {
 			unregister_sysctl_table(xpc_sysctl);
 		}
+
+		kfree(xpc_remote_copy_buffer_base);
 		return -EBUSY;
 	}
 
@@ -1311,6 +1311,8 @@ xpc_init(void)
 		if (xpc_sysctl) {
 			unregister_sysctl_table(xpc_sysctl);
 		}
+
+		kfree(xpc_remote_copy_buffer_base);
 		return -EBUSY;
 	}
 
@@ -1362,6 +1364,8 @@ xpc_init(void)
 		if (xpc_sysctl) {
 			unregister_sysctl_table(xpc_sysctl);
 		}
+
+		kfree(xpc_remote_copy_buffer_base);
 		return -EBUSY;
 	}
 

arch/ia64/sn/kernel/xpc_partition.c

@@ -71,19 +71,15 @@ struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
  * Generic buffer used to store a local copy of portions of a remote
  * partition's reserved page (either its header and part_nasids mask,
  * or its vars).
- *
- * xpc_discovery runs only once and is a seperate thread that is
- * very likely going to be processing in parallel with receiving
- * interrupts.
  */
-char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
-							XP_NASID_MASK_BYTES];
+char *xpc_remote_copy_buffer;
+void *xpc_remote_copy_buffer_base;
 
 
 /*
  * Guarantee that the kmalloc'd memory is cacheline aligned.
  */
-static void *
+void *
 xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
 {
 	/* see if kmalloc will give us cachline aligned memory by default */
@@ -148,7 +144,7 @@ xpc_get_rsvd_page_pa(int nasid)
 			}
 		}
 
-		bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len,
+		bte_res = xp_bte_copy(rp_pa, buf, buf_len,
 					(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 		if (bte_res != BTE_SUCCESS) {
 			dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
@@ -447,7 +443,7 @@ xpc_check_remote_hb(void)
 
 		/* pull the remote_hb cache line */
 		bres = xp_bte_copy(part->remote_vars_pa,
-					ia64_tpa((u64) remote_vars),
+					(u64) remote_vars,
 					XPC_RP_VARS_SIZE,
 					(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 		if (bres != BTE_SUCCESS) {
@@ -498,8 +494,7 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
 
 
 	/* pull over the reserved page header and part_nasids mask */
-
-	bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp),
+	bres = xp_bte_copy(*remote_rp_pa, (u64) remote_rp,
 				XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
 				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 	if (bres != BTE_SUCCESS) {
@@ -554,11 +549,8 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
 		return xpcVarsNotSet;
 	}
 
-
 	/* pull over the cross partition variables */
-
-	bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars),
-				XPC_RP_VARS_SIZE,
+	bres = xp_bte_copy(remote_vars_pa, (u64) remote_vars, XPC_RP_VARS_SIZE,
 				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 	if (bres != BTE_SUCCESS) {
 		return xpc_map_bte_errors(bres);
@@ -1239,7 +1231,7 @@ xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask)
 
 	part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa);
 
-	bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask),
+	bte_res = xp_bte_copy(part_nasid_pa, (u64) nasid_mask,
 			xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
 
 	return xpc_map_bte_errors(bte_res);