New driver "sfc" for Solarstorm SFC4000 controller.
The driver supports the 10Xpress PHY and XFP modules on our reference designs SFE4001 and SFE4002 and the SMC models SMC10GPCIe-XFP and SMC10GPCIe-10BT. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Ben Hutchings
committed by
Jeff Garzik
Jeff Garzik
parent
358c12953b
commit
8ceee660aa
282
drivers/net/sfc/mdio_10g.c
Normal file
282
drivers/net/sfc/mdio_10g.c
Normal file
@@ -0,0 +1,282 @@
|
||||
/****************************************************************************
|
||||
* Driver for Solarflare Solarstorm network controllers and boards
|
||||
* Copyright 2006-2008 Solarflare Communications Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation, incorporated herein by reference.
|
||||
*/
|
||||
/*
|
||||
* Useful functions for working with MDIO clause 45 PHYs
|
||||
*/
|
||||
#include <linux/types.h>
|
||||
#include <linux/ethtool.h>
|
||||
#include <linux/delay.h>
|
||||
#include "net_driver.h"
|
||||
#include "mdio_10g.h"
|
||||
#include "boards.h"
|
||||
|
||||
int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd,
|
||||
int spins, int spintime)
|
||||
{
|
||||
u32 ctrl;
|
||||
int phy_id = port->mii.phy_id;
|
||||
|
||||
/* Catch callers passing values in the wrong units (or just silly) */
|
||||
EFX_BUG_ON_PARANOID(spins * spintime >= 5000);
|
||||
|
||||
mdio_clause45_write(port, phy_id, mmd, MDIO_MMDREG_CTRL1,
|
||||
(1 << MDIO_MMDREG_CTRL1_RESET_LBN));
|
||||
/* Wait for the reset bit to clear. */
|
||||
do {
|
||||
msleep(spintime);
|
||||
ctrl = mdio_clause45_read(port, phy_id, mmd, MDIO_MMDREG_CTRL1);
|
||||
spins--;
|
||||
|
||||
} while (spins && (ctrl & (1 << MDIO_MMDREG_CTRL1_RESET_LBN)));
|
||||
|
||||
return spins ? spins : -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd,
|
||||
int fault_fatal)
|
||||
{
|
||||
int status;
|
||||
int phy_id = efx->mii.phy_id;
|
||||
|
||||
/* Read MMD STATUS2 to check it is responding. */
|
||||
status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT2);
|
||||
if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) &
|
||||
((1 << MDIO_MMDREG_STAT2_PRESENT_WIDTH) - 1)) !=
|
||||
MDIO_MMDREG_STAT2_PRESENT_VAL) {
|
||||
EFX_ERR(efx, "PHY MMD %d not responding.\n", mmd);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/* Read MMD STATUS 1 to check for fault. */
|
||||
status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT1);
|
||||
if ((status & (1 << MDIO_MMDREG_STAT1_FAULT_LBN)) != 0) {
|
||||
if (fault_fatal) {
|
||||
EFX_ERR(efx, "PHY MMD %d reporting fatal"
|
||||
" fault: status %x\n", mmd, status);
|
||||
return -EIO;
|
||||
} else {
|
||||
EFX_LOG(efx, "PHY MMD %d reporting status"
|
||||
" %x (expected)\n", mmd, status);
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* This ought to be ridiculous overkill. We expect it to fail rarely */
|
||||
#define MDIO45_RESET_TIME 1000 /* ms */
|
||||
#define MDIO45_RESET_ITERS 100
|
||||
|
||||
int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
|
||||
unsigned int mmd_mask)
|
||||
{
|
||||
const int spintime = MDIO45_RESET_TIME / MDIO45_RESET_ITERS;
|
||||
int tries = MDIO45_RESET_ITERS;
|
||||
int rc = 0;
|
||||
int in_reset;
|
||||
|
||||
while (tries) {
|
||||
int mask = mmd_mask;
|
||||
int mmd = 0;
|
||||
int stat;
|
||||
in_reset = 0;
|
||||
while (mask) {
|
||||
if (mask & 1) {
|
||||
stat = mdio_clause45_read(efx,
|
||||
efx->mii.phy_id,
|
||||
mmd,
|
||||
MDIO_MMDREG_CTRL1);
|
||||
if (stat < 0) {
|
||||
EFX_ERR(efx, "failed to read status of"
|
||||
" MMD %d\n", mmd);
|
||||
return -EIO;
|
||||
}
|
||||
if (stat & (1 << MDIO_MMDREG_CTRL1_RESET_LBN))
|
||||
in_reset |= (1 << mmd);
|
||||
}
|
||||
mask = mask >> 1;
|
||||
mmd++;
|
||||
}
|
||||
if (!in_reset)
|
||||
break;
|
||||
tries--;
|
||||
msleep(spintime);
|
||||
}
|
||||
if (in_reset != 0) {
|
||||
EFX_ERR(efx, "not all MMDs came out of reset in time."
|
||||
" MMDs still in reset: %x\n", in_reset);
|
||||
rc = -ETIMEDOUT;
|
||||
}
|
||||
return rc;
|
||||
}
|
||||
|
||||
int mdio_clause45_check_mmds(struct efx_nic *efx,
|
||||
unsigned int mmd_mask, unsigned int fatal_mask)
|
||||
{
|
||||
int devices, mmd = 0;
|
||||
int probe_mmd;
|
||||
|
||||
/* Historically we have probed the PHYXS to find out what devices are
|
||||
* present,but that doesn't work so well if the PHYXS isn't expected
|
||||
* to exist, if so just find the first item in the list supplied. */
|
||||
probe_mmd = (mmd_mask & MDIO_MMDREG_DEVS0_PHYXS) ? MDIO_MMD_PHYXS :
|
||||
__ffs(mmd_mask);
|
||||
devices = mdio_clause45_read(efx, efx->mii.phy_id,
|
||||
probe_mmd, MDIO_MMDREG_DEVS0);
|
||||
|
||||
/* Check all the expected MMDs are present */
|
||||
if (devices < 0) {
|
||||
EFX_ERR(efx, "failed to read devices present\n");
|
||||
return -EIO;
|
||||
}
|
||||
if ((devices & mmd_mask) != mmd_mask) {
|
||||
EFX_ERR(efx, "required MMDs not present: got %x, "
|
||||
"wanted %x\n", devices, mmd_mask);
|
||||
return -ENODEV;
|
||||
}
|
||||
EFX_TRACE(efx, "Devices present: %x\n", devices);
|
||||
|
||||
/* Check all required MMDs are responding and happy. */
|
||||
while (mmd_mask) {
|
||||
if (mmd_mask & 1) {
|
||||
int fault_fatal = fatal_mask & 1;
|
||||
if (mdio_clause45_check_mmd(efx, mmd, fault_fatal))
|
||||
return -EIO;
|
||||
}
|
||||
mmd_mask = mmd_mask >> 1;
|
||||
fatal_mask = fatal_mask >> 1;
|
||||
mmd++;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
|
||||
{
|
||||
int phy_id = efx->mii.phy_id;
|
||||
int status;
|
||||
int ok = 1;
|
||||
int mmd = 0;
|
||||
int good;
|
||||
|
||||
while (mmd_mask) {
|
||||
if (mmd_mask & 1) {
|
||||
/* Double reads because link state is latched, and a
|
||||
* read moves the current state into the register */
|
||||
status = mdio_clause45_read(efx, phy_id,
|
||||
mmd, MDIO_MMDREG_STAT1);
|
||||
status = mdio_clause45_read(efx, phy_id,
|
||||
mmd, MDIO_MMDREG_STAT1);
|
||||
|
||||
good = status & (1 << MDIO_MMDREG_STAT1_LINK_LBN);
|
||||
ok = ok && good;
|
||||
}
|
||||
mmd_mask = (mmd_mask >> 1);
|
||||
mmd++;
|
||||
}
|
||||
return ok;
|
||||
}
|
||||
|
||||
/**
|
||||
* mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO.
|
||||
* @efx: Efx NIC
|
||||
* @ecmd: Buffer for settings
|
||||
*
|
||||
* On return the 'port', 'speed', 'supported' and 'advertising' fields of
|
||||
* ecmd have been filled out based on the PMA type.
|
||||
*/
|
||||
void mdio_clause45_get_settings(struct efx_nic *efx,
|
||||
struct ethtool_cmd *ecmd)
|
||||
{
|
||||
int pma_type;
|
||||
|
||||
/* If no PMA is present we are presumably talking something XAUI-ish
|
||||
* like CX4. Which we report as FIBRE (see below) */
|
||||
if ((efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_PMAPMD)) == 0) {
|
||||
ecmd->speed = SPEED_10000;
|
||||
ecmd->port = PORT_FIBRE;
|
||||
ecmd->supported = SUPPORTED_FIBRE;
|
||||
ecmd->advertising = ADVERTISED_FIBRE;
|
||||
return;
|
||||
}
|
||||
|
||||
pma_type = mdio_clause45_read(efx, efx->mii.phy_id,
|
||||
MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL2);
|
||||
pma_type &= MDIO_PMAPMD_CTRL2_TYPE_MASK;
|
||||
|
||||
switch (pma_type) {
|
||||
/* We represent CX4 as fibre in the absence of anything
|
||||
better. */
|
||||
case MDIO_PMAPMD_CTRL2_10G_CX4:
|
||||
ecmd->speed = SPEED_10000;
|
||||
ecmd->port = PORT_FIBRE;
|
||||
ecmd->supported = SUPPORTED_FIBRE;
|
||||
ecmd->advertising = ADVERTISED_FIBRE;
|
||||
break;
|
||||
/* 10G Base-T */
|
||||
case MDIO_PMAPMD_CTRL2_10G_BT:
|
||||
ecmd->speed = SPEED_10000;
|
||||
ecmd->port = PORT_TP;
|
||||
ecmd->supported = SUPPORTED_TP | SUPPORTED_10000baseT_Full;
|
||||
ecmd->advertising = (ADVERTISED_FIBRE
|
||||
| ADVERTISED_10000baseT_Full);
|
||||
break;
|
||||
case MDIO_PMAPMD_CTRL2_1G_BT:
|
||||
ecmd->speed = SPEED_1000;
|
||||
ecmd->port = PORT_TP;
|
||||
ecmd->supported = SUPPORTED_TP | SUPPORTED_1000baseT_Full;
|
||||
ecmd->advertising = (ADVERTISED_FIBRE
|
||||
| ADVERTISED_1000baseT_Full);
|
||||
break;
|
||||
case MDIO_PMAPMD_CTRL2_100_BT:
|
||||
ecmd->speed = SPEED_100;
|
||||
ecmd->port = PORT_TP;
|
||||
ecmd->supported = SUPPORTED_TP | SUPPORTED_100baseT_Full;
|
||||
ecmd->advertising = (ADVERTISED_FIBRE
|
||||
| ADVERTISED_100baseT_Full);
|
||||
break;
|
||||
case MDIO_PMAPMD_CTRL2_10_BT:
|
||||
ecmd->speed = SPEED_10;
|
||||
ecmd->port = PORT_TP;
|
||||
ecmd->supported = SUPPORTED_TP | SUPPORTED_10baseT_Full;
|
||||
ecmd->advertising = ADVERTISED_FIBRE | ADVERTISED_10baseT_Full;
|
||||
break;
|
||||
/* All the other defined modes are flavours of
|
||||
* 10G optical */
|
||||
default:
|
||||
ecmd->speed = SPEED_10000;
|
||||
ecmd->port = PORT_FIBRE;
|
||||
ecmd->supported = SUPPORTED_FIBRE;
|
||||
ecmd->advertising = ADVERTISED_FIBRE;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* mdio_clause45_set_settings - Set (some of) the PHY settings over MDIO.
|
||||
* @efx: Efx NIC
|
||||
* @ecmd: New settings
|
||||
*
|
||||
* Currently this just enforces that we are _not_ changing the
|
||||
* 'port', 'speed', 'supported' or 'advertising' settings as these
|
||||
* cannot be changed on any currently supported PHY.
|
||||
*/
|
||||
int mdio_clause45_set_settings(struct efx_nic *efx,
|
||||
struct ethtool_cmd *ecmd)
|
||||
{
|
||||
struct ethtool_cmd tmpcmd;
|
||||
mdio_clause45_get_settings(efx, &tmpcmd);
|
||||
/* None of the current PHYs support more than one mode
|
||||
* of operation (and only 10GBT ever will), so keep things
|
||||
* simple for now */
|
||||
if ((ecmd->speed == tmpcmd.speed) && (ecmd->port == tmpcmd.port) &&
|
||||
(ecmd->supported == tmpcmd.supported) &&
|
||||
(ecmd->advertising == tmpcmd.advertising))
|
||||
return 0;
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
Reference in New Issue
Block a user