Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  Most of the new code is for the Keystone Navigator driver, which is
  new base support that is going to be needed for their hardware
  accelerated network driver and other units.

  Most of the commits are for moving old code around from at91 and omap
  for things that are done in device drivers nowadays.

   - at91: move reset, poweroff, memory and clocksource code into
     drivers directories
   - socfpga: add edac driver (through arm-soc, as requested by Boris)
   - omap: move omap-intc code to drivers/irqchip
   - sunxi: added an RTC driver for sun6i
   - omap: mailbox driver related changes
   - keystone: support for the "Navigator" component
   - versatile: new reboot, led and soc drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
  bus: arm-ccn: Fix spurious warning message
  leds: add device tree bindings for register bit LEDs
  soc: add driver for the ARM RealView
  power: reset: driver for the Versatile syscon reboot
  leds: add a driver for syscon-based LEDs
  drivers/soc: ti: fix build break with modules
  MAINTAINERS: Add Keystone Multicore Navigator drivers entry
  soc: ti: add Keystone Navigator DMA support
  Documentation: dt: soc: add Keystone Navigator DMA bindings
  soc: ti: add Keystone Navigator QMSS driver
  Documentation: dt: soc: add Keystone Navigator QMSS bindings
  rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc
  rtc: sun6i: Add sun6i RTC driver
  irqchip: omap-intc: remove unnecessary comments
  irqchip: omap-intc: correct maximum number or MIR registers
  irqchip: omap-intc: enable TURBO idle mode
  irqchip: omap-intc: enable IP protection
  irqchip: omap-intc: remove unnecesary of_address_to_resource() call
  irqchip: omap-intc: comment style cleanup
  irqchip: omap-intc: minor improvement to omap_irq_pending()
  ...

drivers/leds/Kconfig

@@ -478,6 +478,16 @@ config LEDS_BLINKM
 	  This option enables support for the BlinkM RGB LED connected
 	  through I2C. Say Y to enable support for the BlinkM LED.
 
+config LEDS_SYSCON
+	bool "LED support for LEDs on system controllers"
+	depends on LEDS_CLASS=y
+	depends on MFD_SYSCON
+	depends on OF
+	help
+	  This option enabled support for the LEDs on syscon type
+	  devices. This will only work with device tree enabled
+	  devices.
+
 config LEDS_VERSATILE
 	tristate "LED support for the ARM Versatile and RealView"
 	depends on ARCH_REALVIEW || ARCH_VERSATILE

drivers/leds/Makefile

@@ -53,6 +53,7 @@ obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
 obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
+obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
 obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
 
 # LED SPI Drivers

drivers/leds/leds-syscon.c

@@ -0,0 +1,166 @@
+/*
+ * Generic Syscon LEDs Driver
+ *
+ * Copyright (c) 2014, Linaro Limited
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This driver provides system reboot functionality for APM X-Gene SoC.
+ * For system shutdown, this is board specify. If a board designer
+ * implements GPIO shutdown, use the gpio-poweroff.c driver.
+ */
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/leds.h>
+
+/**
+ * struct syscon_led - state container for syscon based LEDs
+ * @cdev: LED class device for this LED
+ * @map: regmap to access the syscon device backing this LED
+ * @offset: the offset into the syscon regmap for the LED register
+ * @mask: the bit in the register corresponding to the LED
+ * @state: current state of the LED
+ */
+struct syscon_led {
+	struct led_classdev cdev;
+	struct regmap *map;
+	u32 offset;
+	u32 mask;
+	bool state;
+};
+
+static void syscon_led_set(struct led_classdev *led_cdev,
+	enum led_brightness value)
+{
+	struct syscon_led *sled =
+		container_of(led_cdev, struct syscon_led, cdev);
+	u32 val;
+	int ret;
+
+	if (value == LED_OFF) {
+		val = 0;
+		sled->state = false;
+	} else {
+		val = sled->mask;
+		sled->state = true;
+	}
+
+	ret = regmap_update_bits(sled->map, sled->offset, sled->mask, val);
+	if (ret < 0)
+		dev_err(sled->cdev.dev, "error updating LED status\n");
+}
+
+static const struct of_device_id syscon_match[] = {
+	{ .compatible = "syscon", },
+	{},
+};
+
+static int __init syscon_leds_init(void)
+{
+	const struct of_device_id *devid;
+	struct device_node *np;
+	struct device_node *child;
+	struct regmap *map;
+	struct platform_device *pdev;
+	struct device *dev;
+	int ret;
+
+	np = of_find_matching_node_and_match(NULL, syscon_match,
+					     &devid);
+	if (!np)
+		return -ENODEV;
+
+	map = syscon_node_to_regmap(np);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	/*
+	 * If the map is there, the device should be there, we allocate
+	 * memory on the syscon device's behalf here.
+	 */
+	pdev = of_find_device_by_node(np);
+	if (!pdev)
+		return -ENODEV;
+	dev = &pdev->dev;
+
+	for_each_available_child_of_node(np, child) {
+		struct syscon_led *sled;
+		const char *state;
+
+		/* Only check for register-bit-leds */
+		if (of_property_match_string(child, "compatible",
+					     "register-bit-led") < 0)
+			continue;
+
+		sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
+		if (!sled)
+			return -ENOMEM;
+
+		sled->map = map;
+
+		if (of_property_read_u32(child, "offset", &sled->offset))
+			return -EINVAL;
+		if (of_property_read_u32(child, "mask", &sled->mask))
+			return -EINVAL;
+		sled->cdev.name =
+			of_get_property(child, "label", NULL) ? : child->name;
+		sled->cdev.default_trigger =
+			of_get_property(child, "linux,default-trigger", NULL);
+
+		state = of_get_property(child, "default-state", NULL);
+		if (state) {
+			if (!strcmp(state, "keep")) {
+				u32 val;
+
+				ret = regmap_read(map, sled->offset, &val);
+				if (ret < 0)
+					return ret;
+				sled->state = !!(val & sled->mask);
+			} else if (!strcmp(state, "on")) {
+				sled->state = true;
+				ret = regmap_update_bits(map, sled->offset,
+							 sled->mask,
+							 sled->mask);
+				if (ret < 0)
+					return ret;
+			} else {
+				sled->state = false;
+				ret = regmap_update_bits(map, sled->offset,
+							 sled->mask, 0);
+				if (ret < 0)
+					return ret;
+			}
+
+		}
+		sled->cdev.brightness_set = syscon_led_set;
+
+		ret = led_classdev_register(dev, &sled->cdev);
+		if (ret < 0)
+			return ret;
+
+		dev_info(dev, "registered LED %s\n", sled->cdev.name);
+	}
+
+       return 0;
+}
+device_initcall(syscon_leds_init);