xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
派生 0
代码 工单 合并请求 工作流 软件包 项目 发布 百科 活动

drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags

浏览代码 
The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and
DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the
new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and
new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them
through the code.

This effectively changes the value of the .sampling_edge bridge timings
field in the dumb-vga-dac driver. This is safe to do as no driver
consumes these values yet.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
这个提交包含在：
Laurent Pinchart
2018-09-22 15:02:42 +03:00
提交者 Tomi Valkeinen
父节点 a792fa0e21
当前提交 88bc417856
共修改 25 个文件，包含 77 行新增和 68 行删除
下载 Patch 文件 下载 Diff 文件 展开所有文件 折叠所有文件

5
drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
查看文件

@@ -86,8 +86,9 @@ static int tfp410_probe(struct platform_device *pdev)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(1) | BIT(0);
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
| DRM_BUS_FLAG_PIXDATA_POSEDGE;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
dssdev->next = omapdss_of_find_connected_device(pdev->dev.of_node, 1);
if (IS_ERR(dssdev->next)) {

5
drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
查看文件

@@ -207,8 +207,9 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
* DE is active LOW
* DATA needs to be driven on the FALLING edge
*/
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
| DRM_BUS_FLAG_PIXDATA_POSEDGE;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);

5
drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
查看文件

@@ -196,8 +196,9 @@ static int nec_8048_probe(struct spi_device *spi)
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
| DRM_BUS_FLAG_PIXDATA_POSEDGE;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);

5
drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
查看文件

@@ -216,8 +216,9 @@ static int sharp_ls_probe(struct platform_device *pdev)
* Note: According to the panel documentation:
* DATA needs to be driven on the FALLING edge
*/
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
| DRM_BUS_FLAG_PIXDATA_POSEDGE;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);

5
drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
查看文件

@@ -710,8 +710,9 @@ static int acx565akm_probe(struct spi_device *spi)
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
| DRM_BUS_FLAG_PIXDATA_POSEDGE;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);

5
drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
查看文件

@@ -330,8 +330,9 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
* Note: According to the panel documentation:
* SYNC needs to be driven on the FALLING edge
*/
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
| DRM_BUS_FLAG_PIXDATA_NEGEDGE;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);

5
drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
查看文件

@@ -429,8 +429,9 @@ static int tpo_td043_probe(struct spi_device *spi)
* Note: According to the panel documentation:
* SYNC needs to be driven on the FALLING edge
*/
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
| DRM_BUS_FLAG_PIXDATA_NEGEDGE;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);