Merge branch 'i2c/for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - the first series of making i2c_device_id optional instead of
   mandatory (in favor of alternatives like of_device_id).

   This involves adding a new probe callback (probe_new) which removes
   some peculiarities I2C had for a long time now. The new probe is
   matching the other subsystems now and the old one will be removed
   once all users are converted. It is expected to take a while but
   there is ongoing interest in that.

 - SMBus Host Notify introduced 4.9 got refactored. They are now using
   interrupts instead of the alert callback which solves multiple
   issues.

 - new drivers for iMX LowPower I2C, Mellanox CPLD and its I2C mux

 - significant refactoring for bcm2835 driver

 - the usual set of driver updates and improvements

* 'i2c/for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
  i2c: fsl-lpi2c: read lpi2c fifo size in probe()
  i2c: octeon: thunderx: Remove double-check after interrupt
  i2c: octeon: thunderx: TWSI software reset in recovery
  i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUs
  i2c: sh_mobile: Add per-Generation fallback bindings
  i2c: rcar: Add per-Generation fallback bindings
  i2c: imx-lpi2c: add low power i2c bus driver
  dt-bindings: i2c: imx-lpi2c: add devicetree bindings
  i2c: designware-pcidrv: Add 10bit address feature to medfield/merrifield
  i2c: pxa: Add support for the I2C units found in Armada 3700
  i2c: pxa: Add definition of fast and high speed modes via the regs layout
  dt-bindings: i2c: pxa: Update the documentation for the Armada 3700
  i2c: qup: support SMBus block read
  i2c: qup: add ACPI support
  i2c: designware: Consolidate default functionality bits
  i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep
  i2c: mux: pca954x: Add ACPI support for pca954x
  i2c: use an IRQ to report Host Notify events, not alert
  i2c: i801: remove SMBNTFDDAT reads as they always seem to return 0
  i2c: i801: use the BIT() macro for FEATURES_* also
  ...

drivers/i2c/muxes/i2c-mux-pca954x.c

@@ -35,6 +35,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/acpi.h>
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
@@ -120,6 +121,21 @@ static const struct i2c_device_id pca954x_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, pca954x_id);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id pca954x_acpi_ids[] = {
+	{ .id = "PCA9540", .driver_data = pca_9540 },
+	{ .id = "PCA9542", .driver_data = pca_9540 },
+	{ .id = "PCA9543", .driver_data = pca_9543 },
+	{ .id = "PCA9544", .driver_data = pca_9544 },
+	{ .id = "PCA9545", .driver_data = pca_9545 },
+	{ .id = "PCA9546", .driver_data = pca_9545 },
+	{ .id = "PCA9547", .driver_data = pca_9547 },
+	{ .id = "PCA9548", .driver_data = pca_9548 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, pca954x_acpi_ids);
+#endif
+
 #ifdef CONFIG_OF
 static const struct of_device_id pca954x_of_match[] = {
 	{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
@@ -245,8 +261,17 @@ static int pca954x_probe(struct i2c_client *client,
 	match = of_match_device(of_match_ptr(pca954x_of_match), &client->dev);
 	if (match)
 		data->chip = of_device_get_match_data(&client->dev);
-	else
+	else if (id)
 		data->chip = &chips[id->driver_data];
+	else {
+		const struct acpi_device_id *acpi_id;
+
+		acpi_id = acpi_match_device(ACPI_PTR(pca954x_acpi_ids),
+						&client->dev);
+		if (!acpi_id)
+			return -ENODEV;
+		data->chip = &chips[acpi_id->driver_data];
+	}
 
 	data->last_chan = 0;		   /* force the first selection */
 
@@ -321,6 +346,7 @@ static struct i2c_driver pca954x_driver = {
 		.name	= "pca954x",
 		.pm	= &pca954x_pm,
 		.of_match_table = of_match_ptr(pca954x_of_match),
+		.acpi_match_table = ACPI_PTR(pca954x_acpi_ids),
 	},
 	.probe		= pca954x_probe,
 	.remove		= pca954x_remove,