[ISDN] Hisax: eliminate many unnecessary references to CardType[]

For the vast majority of CardType[card->typ] uses (but not all!),
the string is constant for each driver.  Therefore, we may replace
CardType[card->typ] with the actual string describing the driver, making
each printk() a bit more simple.

This also has the nice, intended side effect of greatly reducing
external references to hisax global CardType[].  This will be of value
once the ISDN drivers are converted to the ISA/PCI/PNP hotplug APIs.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/isdn/hisax/niccy.c

@@ -21,7 +21,6 @@
 #include <linux/pci.h>
 #include <linux/isapnp.h>
 
-extern const char *CardType[];
 static const char *niccy_revision = "$Revision: 1.21.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -284,14 +283,14 @@ int __devinit setup_niccy(struct IsdnCard *card)
 		cs->subtyp = NICCY_PNP;
 		cs->irq = card->para[0];
 		if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
-			printk(KERN_WARNING "HiSax: %s data port %x-%x "
-				"already in use\n", CardType[card->typ],
+			printk(KERN_WARNING "HiSax: NICCY data port %x-%x "
+				"already in use\n",
 				cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
 			return 0;
 		}
 		if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
-			printk(KERN_WARNING "HiSax: %s address port %x-%x "
-				"already in use\n", CardType[card->typ],
+			printk(KERN_WARNING "HiSax: NICCY address port %x-%x "
+				"already in use\n",
 				cs->hw.niccy.isac_ale,
 				cs->hw.niccy.isac_ale + 1);
 			release_region(cs->hw.niccy.isac, 2);
@@ -339,15 +338,13 @@ int __devinit setup_niccy(struct IsdnCard *card)
 		cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
 		if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
 			printk(KERN_WARNING
-			       "HiSax: %s data port %x-%x already in use\n",
-			       CardType[card->typ],
+			       "HiSax: NICCY data port %x-%x already in use\n",
 			       cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
 			return 0;
 		}
 		if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
 			printk(KERN_WARNING
-			       "HiSax: %s pci port %x-%x already in use\n",
-			       CardType[card->typ],
+			       "HiSax: NICCY pci port %x-%x already in use\n",
 			       cs->hw.niccy.cfg_reg,
 			       cs->hw.niccy.cfg_reg + 0x40);
 			release_region(cs->hw.niccy.isac, 4);
@@ -359,8 +356,8 @@ int __devinit setup_niccy(struct IsdnCard *card)
 		return 0;
 #endif				/* CONFIG_PCI_LEGACY */
 	}
-	printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
-		CardType[cs->typ], (cs->subtyp == 1) ? "PnP" : "PCI",
+	printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
+		(cs->subtyp == 1) ? "PnP" : "PCI",
 		cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
 	setup_isac(cs);
 	cs->readisac = &ReadISAC;