libata: make SCR access ops per-link

Logically, SCR access ops should take @link; however, there was no
compelling reason to convert all SCR access ops when adding @link
abstraction as there's one-to-one mapping between a port and a non-PMP
link.  However, that assumption won't hold anymore with the scheduled
addition of slave link.

Make SCR access ops per-link.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Tejun Heo
2008-07-31 17:02:40 +09:00
committed by Jeff Garzik
parent 6ef190cc92
commit 82ef04fb4c
18 changed files with 153 additions and 141 deletions

View File

@@ -267,8 +267,8 @@ struct ahci_port_priv {
* per PM slot */
};
static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
@@ -820,10 +820,10 @@ static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
return 0;
}
static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
{
void __iomem *port_mmio = ahci_port_base(ap);
int offset = ahci_scr_offset(ap, sc_reg);
void __iomem *port_mmio = ahci_port_base(link->ap);
int offset = ahci_scr_offset(link->ap, sc_reg);
if (offset) {
*val = readl(port_mmio + offset);
@@ -832,10 +832,10 @@ static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
return -EINVAL;
}
static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
{
void __iomem *port_mmio = ahci_port_base(ap);
int offset = ahci_scr_offset(ap, sc_reg);
void __iomem *port_mmio = ahci_port_base(link->ap);
int offset = ahci_scr_offset(link->ap, sc_reg);
if (offset) {
writel(val, port_mmio + offset);
@@ -973,7 +973,7 @@ static void ahci_disable_alpm(struct ata_port *ap)
writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
/* go ahead and clean out PhyRdy Change from Serror too */
ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
/*
* Clear flag to indicate that we should ignore all PhyRdy
@@ -1937,8 +1937,8 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
/* AHCI needs SError cleared; otherwise, it might lock up */
ahci_scr_read(ap, SCR_ERROR, &serror);
ahci_scr_write(ap, SCR_ERROR, serror);
ahci_scr_read(&ap->link, SCR_ERROR, &serror);
ahci_scr_write(&ap->link, SCR_ERROR, serror);
host_ehi->serror |= serror;
/* some controllers set IRQ_IF_ERR on device errors, ignore it */
@@ -2027,7 +2027,7 @@ static void ahci_port_intr(struct ata_port *ap)
if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
(status & PORT_IRQ_PHYRDY)) {
status &= ~PORT_IRQ_PHYRDY;
ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
}
if (unlikely(status & PORT_IRQ_ERROR)) {