Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86/apic updates from Thomas Gleixner:
 "This is a major overhaul to the x86 apic subsystem consisting of the
  following parts:

   - Remove obsolete APIC driver abstractions (David Rientjes)

   - Use the irqdomain facilities to dynamically allocate IRQs for
     IOAPICs.  This is a prerequisite to enable IOAPIC hotplug support,
     and it also frees up wasted vectors (Jiang Liu)

   - Misc fixlets.

  Despite the hickup in Ingos previous pull request - caused by the
  missing fixup for the suspend/resume issue reported by Borislav - I
  strongly recommend that this update finds its way into 3.17.  Some
  history for you:

  This is preparatory work for physical IOAPIC hotplug.  The first
  attempt to support this was done by Yinghai and I shot it down because
  it just added another layer of obscurity and complexity to the already
  existing mess without tackling the underlying shortcomings of the
  current implementation.

  After quite some on- and offlist discussions, I requested that the
  design of this functionality must use generic infrastructure, i.e.
  irq domains, which provide all the mechanisms to dynamically map linux
  interrupt numbers to physical interrupts.

  Jiang picked up the idea and did a great job of consolidating the
  existing interfaces to manage the x86 (IOAPIC) interrupt system by
  utilizing irq domains.

  The testing in tip, Linux-next and inside of Intel on various machines
  did not unearth any oddities until Borislav exposed it to one of his
  oddball machines.  The issue was resolved quickly, but unfortunately
  the fix fell through the cracks and did not hit the tip tree before
  Ingo sent the pull request.  Not entirely Ingos fault, I also assumed
  that the fix was already merged when Ingo asked me whether he could
  send it.

  Nevertheless this work has a proper design, has undergone several
  rounds of review and the final fallout after applying it to tip and
  integrating it into Linux-next has been more than moderate.  It's the
  ground work not only for IOAPIC hotplug, it will also allow us to move
  the lowlevel vector allocation into the irqdomain hierarchy, which
  will benefit other architectures as well.  Patches are posted already,
  but they are on hold for two weeks, see below.

  I really appreciate the competence and responsiveness Jiang has shown
  in course of this endavour.  So I'm sure that any fallout of this will
  be addressed in a timely manner.

  FYI, I'm vanishing for 2 weeks into my annual kids summer camp kitchen
  duty^Wvacation, while you folks are drooling at KS/LinuxCon :) But HPA
  will have a look at the hopefully zero fallout until I'm back"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation
  x86/apic/vsmp: Make is_vsmp_box() static
  x86, apic: Remove enable_apic_mode callback
  x86, apic: Remove setup_portio_remap callback
  x86, apic: Remove multi_timer_check callback
  x86, apic: Replace noop_check_apicid_used
  x86, apic: Remove check_apicid_present callback
  x86, apic: Remove mps_oem_check callback
  x86, apic: Remove smp_callin_clear_local_apic callback
  x86, apic: Replace trampoline physical addresses with defaults
  x86, apic: Remove x86_32_numa_cpu_node callback
  x86: intel-mid: Use the new io_apic interfaces
  x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()
  x86, irq: Clean up irqdomain transition code
  x86, irq, devicetree: Release IOAPIC pin when PCI device is disabled
  x86, irq, SFI: Release IOAPIC pin when PCI device is disabled
  x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled
  x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled
  x86, irq: Introduce helper functions to release IOAPIC pin
  x86, irq: Simplify the way to handle ISA IRQ
  ...

arch/x86/platform/ce4100/ce4100.c

@@ -135,14 +135,10 @@ static void __init sdv_arch_setup(void)
 	sdv_serial_fixup();
 }
 
-#ifdef CONFIG_X86_IO_APIC
 static void sdv_pci_init(void)
 {
 	x86_of_pci_init();
-	/* We can't set this earlier, because we need to calibrate the timer */
-	legacy_pic = &null_legacy_pic;
 }
-#endif
 
 /*
  * CE4100 specific x86_init function overrides and early setup
@@ -155,7 +151,9 @@ void __init x86_ce4100_early_setup(void)
 	x86_init.resources.probe_roms = x86_init_noop;
 	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
 	x86_init.mpparse.find_smp_config = x86_init_noop;
+	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
 	x86_init.pci.init = ce4100_pci_init;
+	x86_init.pci.init_irq = sdv_pci_init;
 
 	/*
 	 * By default, the reboot method is ACPI which is supported by the
@@ -166,10 +164,5 @@ void __init x86_ce4100_early_setup(void)
 	 */
 	reboot_type = BOOT_KBD;
 
-#ifdef CONFIG_X86_IO_APIC
-	x86_init.pci.init_irq = sdv_pci_init;
-	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
-#endif
-
 	pm_power_off = ce4100_power_off;
 }

arch/x86/platform/intel-mid/device_libs/platform_wdt.c

@@ -26,28 +26,18 @@ static struct platform_device wdt_dev = {
 
 static int tangier_probe(struct platform_device *pdev)
 {
-	int ioapic;
-	int irq;
+	int gsi;
 	struct intel_mid_wdt_pdata *pdata = pdev->dev.platform_data;
-	struct io_apic_irq_attr irq_attr = { 0 };
 
 	if (!pdata)
 		return -EINVAL;
 
-	irq = pdata->irq;
-	ioapic = mp_find_ioapic(irq);
-	if (ioapic >= 0) {
-		int ret;
-		irq_attr.ioapic = ioapic;
-		irq_attr.ioapic_pin = irq;
-		irq_attr.trigger = 1;
-		/* irq_attr.polarity = 0; -> Active high */
-		ret = io_apic_set_pci_routing(NULL, irq, &irq_attr);
-		if (ret)
-			return ret;
-	} else {
+	/* IOAPIC builds identity mapping between GSI and IRQ on MID */
+	gsi = pdata->irq;
+	if (mp_set_gsi_attr(gsi, 1, 0, cpu_to_node(0)) ||
+	    mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC) <= 0) {
 		dev_warn(&pdev->dev, "cannot find interrupt %d in ioapic\n",
-			 irq);
+			 gsi);
 		return -EINVAL;
 	}
 

arch/x86/platform/intel-mid/sfi.c

@@ -432,9 +432,8 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 	struct sfi_table_simple *sb;
 	struct sfi_device_table_entry *pentry;
 	struct devs_id *dev = NULL;
-	int num, i;
-	int ioapic;
-	struct io_apic_irq_attr irq_attr;
+	int num, i, ret;
+	int polarity;
 
 	sb = (struct sfi_table_simple *)table;
 	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
@@ -448,35 +447,30 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 			 * devices, but they have separate RTE entry in IOAPIC
 			 * so we have to enable them one by one here
 			 */
-			ioapic = mp_find_ioapic(irq);
-			if (ioapic >= 0) {
-				irq_attr.ioapic = ioapic;
-				irq_attr.ioapic_pin = irq;
-				irq_attr.trigger = 1;
-				if (intel_mid_identify_cpu() ==
-						INTEL_MID_CPU_CHIP_TANGIER) {
-					if (!strncmp(pentry->name,
-							"r69001-ts-i2c", 13))
-						/* active low */
-						irq_attr.polarity = 1;
-					else if (!strncmp(pentry->name,
-							"synaptics_3202", 14))
-						/* active low */
-						irq_attr.polarity = 1;
-					else if (irq == 41)
-						/* fast_int_1 */
-						irq_attr.polarity = 1;
-					else
-						/* active high */
-						irq_attr.polarity = 0;
-				} else {
-					/* PNW and CLV go with active low */
-					irq_attr.polarity = 1;
-				}
-				io_apic_set_pci_routing(NULL, irq, &irq_attr);
+			if (intel_mid_identify_cpu() ==
+					INTEL_MID_CPU_CHIP_TANGIER) {
+				if (!strncmp(pentry->name, "r69001-ts-i2c", 13))
+					/* active low */
+					polarity = 1;
+				else if (!strncmp(pentry->name,
+						"synaptics_3202", 14))
+					/* active low */
+					polarity = 1;
+				else if (irq == 41)
+					/* fast_int_1 */
+					polarity = 1;
+				else
+					/* active high */
+					polarity = 0;
+			} else {
+				/* PNW and CLV go with active low */
+				polarity = 1;
 			}
-		} else {
-			irq = 0; /* No irq */
+
+			ret = mp_set_gsi_attr(irq, 1, polarity, NUMA_NO_NODE);
+			if (ret == 0)
+				ret = mp_map_gsi_to_irq(irq, IOAPIC_MAP_ALLOC);
+			WARN_ON(ret < 0);
 		}
 
 		dev = get_device_id(pentry->type, pentry->name);

arch/x86/platform/sfi/sfi.c

@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/sfi.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
 
 #include <asm/io_apic.h>
 #include <asm/mpspec.h>
@@ -70,19 +71,26 @@ static int __init sfi_parse_cpus(struct sfi_table_header *table)
 #endif /* CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_IO_APIC
+static struct irq_domain_ops sfi_ioapic_irqdomain_ops = {
+	.map = mp_irqdomain_map,
+};
 
 static int __init sfi_parse_ioapic(struct sfi_table_header *table)
 {
 	struct sfi_table_simple *sb;
 	struct sfi_apic_table_entry *pentry;
 	int i, num;
+	struct ioapic_domain_cfg cfg = {
+		.type = IOAPIC_DOMAIN_STRICT,
+		.ops = &sfi_ioapic_irqdomain_ops,
+	};
 
 	sb = (struct sfi_table_simple *)table;
 	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_apic_table_entry);
 	pentry = (struct sfi_apic_table_entry *)sb->pentry;
 
 	for (i = 0; i < num; i++) {
-		mp_register_ioapic(i, pentry->phys_addr, gsi_top);
+		mp_register_ioapic(i, pentry->phys_addr, gsi_top, &cfg);
 		pentry++;
 	}